Filtered by vendor Linux
Subscriptions
Total
17893 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50679 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i40e: Fix DMA mappings leak During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler. | ||||
| CVE-2022-50674 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: vdso: fix NULL deference in vdso_join_timens() when vfork Testing tools/testing/selftests/timens/vfork_exec.c got below kernel log: [ 6.838454] Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000000020 [ 6.842255] Oops [#1] [ 6.842871] Modules linked in: [ 6.844249] CPU: 1 PID: 64 Comm: vfork_exec Not tainted 6.0.0-rc3-rt15+ #8 [ 6.845861] Hardware name: riscv-virtio,qemu (DT) [ 6.848009] epc : vdso_join_timens+0xd2/0x110 [ 6.850097] ra : vdso_join_timens+0xd2/0x110 [ 6.851164] epc : ffffffff8000635c ra : ffffffff8000635c sp : ff6000000181fbf0 [ 6.852562] gp : ffffffff80cff648 tp : ff60000000fdb700 t0 : 3030303030303030 [ 6.853852] t1 : 0000000000000030 t2 : 3030303030303030 s0 : ff6000000181fc40 [ 6.854984] s1 : ff60000001e6c000 a0 : 0000000000000010 a1 : ffffffff8005654c [ 6.856221] a2 : 00000000ffffefff a3 : 0000000000000000 a4 : 0000000000000000 [ 6.858114] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 6.859484] s2 : ff60000001e6c068 s3 : ff6000000108abb0 s4 : 0000000000000000 [ 6.860751] s5 : 0000000000001000 s6 : ffffffff8089dc40 s7 : ffffffff8089dc38 [ 6.862029] s8 : ffffffff8089dc30 s9 : ff60000000fdbe38 s10: 000000000000005e [ 6.863304] s11: ffffffff80cc3510 t3 : ffffffff80d1112f t4 : ffffffff80d1112f [ 6.864565] t5 : ffffffff80d11130 t6 : ff6000000181fa00 [ 6.865561] status: 0000000000000120 badaddr: 0000000000000020 cause: 000000000000000d [ 6.868046] [<ffffffff8008dc94>] timens_commit+0x38/0x11a [ 6.869089] [<ffffffff8008dde8>] timens_on_fork+0x72/0xb4 [ 6.870055] [<ffffffff80190096>] begin_new_exec+0x3c6/0x9f0 [ 6.871231] [<ffffffff801d826c>] load_elf_binary+0x628/0x1214 [ 6.872304] [<ffffffff8018ee7a>] bprm_execve+0x1f2/0x4e4 [ 6.873243] [<ffffffff8018f90c>] do_execveat_common+0x16e/0x1ee [ 6.874258] [<ffffffff8018f9c8>] sys_execve+0x3c/0x48 [ 6.875162] [<ffffffff80003556>] ret_from_syscall+0x0/0x2 [ 6.877484] ---[ end trace 0000000000000000 ]--- This is because the mm->context.vdso_info is NULL in vfork case. From another side, mm->context.vdso_info either points to vdso info for RV64 or vdso info for compat, there's no need to bloat riscv's mm_context_t, we can handle the difference when setup the additional page for vdso. | ||||
| CVE-2022-50671 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix "kernel NULL pointer dereference" error When rxe_queue_init in the function rxe_qp_init_req fails, both qp->req.task.func and qp->req.task.arg are not initialized. Because of creation of qp fails, the function rxe_create_qp will call rxe_qp_do_cleanup to handle allocated resource. Before calling __rxe_do_task, both qp->req.task.func and qp->req.task.arg should be checked. | ||||
| CVE-2022-50670 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: omap_hsmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path wihch will call mmc_free_host(). | ||||
| CVE-2022-50663 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix possible memory leak in stmmac_dvr_probe() The bitmap_free() should be called to free priv->af_xdp_zc_qps when create_singlethread_workqueue() fails, otherwise there will be a memory leak, so we add the err path error_wq_init to fix it. | ||||
| CVE-2022-50659 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: geode - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. We add a new struct 'amd_geode_priv' to record pointer of the pci_dev and membase, and then add missing pci_dev_put() for the normal and error path. | ||||
| CVE-2022-50656 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Clear nfc_target before being used Fix a slab-out-of-bounds read that occurs in nla_put() called from nfc_genl_send_target() when target->sensb_res_len, which is duplicated from an nfc_target in pn533, is too large as the nfc_target is not properly initialized and retains garbage values. Clear nfc_targets with memset() before they are used. Found by a modified version of syzkaller. BUG: KASAN: slab-out-of-bounds in nla_put Call Trace: memcpy nla_put nfc_genl_dump_targets genl_lock_dumpit netlink_dump __netlink_dump_start genl_family_rcv_msg_dumpit genl_rcv_msg netlink_rcv_skb genl_rcv netlink_unicast netlink_sendmsg sock_sendmsg ____sys_sendmsg ___sys_sendmsg __sys_sendmsg do_syscall_64 | ||||
| CVE-2022-50652 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uio: uio_dmem_genirq: Fix missing unlock in irq configuration Commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()") started calling disable_irq() without holding the spinlock because it can sleep. However, that fix introduced another bug: if interrupt is already disabled and a new disable request comes in, then the spinlock is not unlocked: root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0 root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0 root@localhost:~# [ 14.851538] BUG: scheduling while atomic: bash/223/0x00000002 [ 14.851991] Modules linked in: uio_dmem_genirq uio myfpga(OE) bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper drm snd_pcm ppdev joydev psmouse snd_timer snd e1000fb_sys_fops syscopyarea parport sysfillrect soundcore sysimgblt input_leds pcspkr i2c_piix4 serio_raw floppy evbug qemu_fw_cfg mac_hid pata_acpi ip_tables x_tables autofs4 [last unloaded: parport_pc] [ 14.854206] CPU: 0 PID: 223 Comm: bash Tainted: G OE 6.0.0-rc7 #21 [ 14.854786] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 14.855664] Call Trace: [ 14.855861] <TASK> [ 14.856025] dump_stack_lvl+0x4d/0x67 [ 14.856325] dump_stack+0x14/0x1a [ 14.856583] __schedule_bug.cold+0x4b/0x5c [ 14.856915] __schedule+0xe81/0x13d0 [ 14.857199] ? idr_find+0x13/0x20 [ 14.857456] ? get_work_pool+0x2d/0x50 [ 14.857756] ? __flush_work+0x233/0x280 [ 14.858068] ? __schedule+0xa95/0x13d0 [ 14.858307] ? idr_find+0x13/0x20 [ 14.858519] ? get_work_pool+0x2d/0x50 [ 14.858798] schedule+0x6c/0x100 [ 14.859009] schedule_hrtimeout_range_clock+0xff/0x110 [ 14.859335] ? tty_write_room+0x1f/0x30 [ 14.859598] ? n_tty_poll+0x1ec/0x220 [ 14.859830] ? tty_ldisc_deref+0x1a/0x20 [ 14.860090] schedule_hrtimeout_range+0x17/0x20 [ 14.860373] do_select+0x596/0x840 [ 14.860627] ? __kernel_text_address+0x16/0x50 [ 14.860954] ? poll_freewait+0xb0/0xb0 [ 14.861235] ? poll_freewait+0xb0/0xb0 [ 14.861517] ? rpm_resume+0x49d/0x780 [ 14.861798] ? common_interrupt+0x59/0xa0 [ 14.862127] ? asm_common_interrupt+0x2b/0x40 [ 14.862511] ? __uart_start.isra.0+0x61/0x70 [ 14.862902] ? __check_object_size+0x61/0x280 [ 14.863255] core_sys_select+0x1c6/0x400 [ 14.863575] ? vfs_write+0x1c9/0x3d0 [ 14.863853] ? vfs_write+0x1c9/0x3d0 [ 14.864121] ? _copy_from_user+0x45/0x70 [ 14.864526] do_pselect.constprop.0+0xb3/0xf0 [ 14.864893] ? do_syscall_64+0x6d/0x90 [ 14.865228] ? do_syscall_64+0x6d/0x90 [ 14.865556] __x64_sys_pselect6+0x76/0xa0 [ 14.865906] do_syscall_64+0x60/0x90 [ 14.866214] ? syscall_exit_to_user_mode+0x2a/0x50 [ 14.866640] ? do_syscall_64+0x6d/0x90 [ 14.866972] ? do_syscall_64+0x6d/0x90 [ 14.867286] ? do_syscall_64+0x6d/0x90 [ 14.867626] entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] stripped [ 14.872959] </TASK> ('myfpga' is a simple 'uio_dmem_genirq' driver I wrote to test this) The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and it is used in a similar manner to the "uio_pdrv_genirq" driver with respect to interrupt configuration and handling. At the time "uio_dmem_genirq" was introduced, both had the same implementation of the 'uio_info' handlers irqcontrol() and handler(). Then commit 34cb27528398 ("UIO: Fix concurrency issue"), which was only applied to "uio_pdrv_genirq", ended up making them a little different. That commit, among other things, changed disable_irq() to disable_irq_nosync() in the implementation of irqcontrol(). The motivation there was to avoid a deadlock between irqcontrol() and handler(), since it added a spinlock in the irq handler, and disable_irq() waits for the completion of the irq handler. By changing disable_irq() to disable_irq_nosync() in irqcontrol(), we also avoid the sleeping-whil ---truncated--- | ||||
| CVE-2022-50645 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper() As the comment of pci_get_domain_bus_and_slot() says, it returns a PCI device with refcount incremented, so it doesn't need to call an extra pci_dev_get() in pci_get_dev_wrapper(), and the PCI device needs to be put in the error path. | ||||
| CVE-2022-50639 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io-wq: Fix memory leak in worker creation If the CPU mask allocation for a node fails, then the memory allocated for the 'io_wqe' struct of the current node doesn't get freed on the error handling path, since it has not yet been added to the 'wqes' array. This was spotted when fuzzing v6.1-rc1 with Syzkaller: BUG: memory leak unreferenced object 0xffff8880093d5000 (size 1024): comm "syz-executor.2", pid 7701, jiffies 4295048595 (age 13.900s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000cb463369>] __kmem_cache_alloc_node+0x18e/0x720 [<00000000147a3f9c>] kmalloc_node_trace+0x2a/0x130 [<000000004e107011>] io_wq_create+0x7b9/0xdc0 [<00000000c38b2018>] io_uring_alloc_task_context+0x31e/0x59d [<00000000867399da>] __io_uring_add_tctx_node.cold+0x19/0x1ba [<000000007e0e7a79>] io_uring_setup.cold+0x1b80/0x1dce [<00000000b545e9f6>] __x64_sys_io_uring_setup+0x5d/0x80 [<000000008a8a7508>] do_syscall_64+0x5d/0x90 [<000000004ac08bec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2022-50634 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: cw2015: Fix potential null-ptr-deref in cw_bat_probe() cw_bat_probe() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: cw_bat_probe() create_singlethread_workqueue() # failed, cw_bat->wq is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL. | ||||
| CVE-2025-40007 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: fix reference leak Commit 20d72b00ca81 ("netfs: Fix the request's work item to not require a ref") modified netfs_alloc_request() to initialize the reference counter to 2 instead of 1. The rationale was that the requet's "work" would release the second reference after completion (via netfs_{read,write}_collection_worker()). That works most of the time if all goes well. However, it leaks this additional reference if the request is released before the I/O operation has been submitted: the error code path only decrements the reference counter once and the work item will never be queued because there will never be a completion. This has caused outages of our whole server cluster today because tasks were blocked in netfs_wait_for_outstanding_io(), leading to deadlocks in Ceph (another bug that I will address soon in another patch). This was caused by a netfs_pgpriv2_begin_copy_to_cache() call which failed in fscache_begin_write_operation(). The leaked netfs_io_request was never completed, leaving `netfs_inode.io_count` with a positive value forever. All of this is super-fragile code. Finding out which code paths will lead to an eventual completion and which do not is hard to see: - Some functions like netfs_create_write_req() allocate a request, but will never submit any I/O. - netfs_unbuffered_read_iter_locked() calls netfs_unbuffered_read() and then netfs_put_request(); however, netfs_unbuffered_read() can also fail early before submitting the I/O request, therefore another netfs_put_request() call must be added there. A rule of thumb is that functions that return a `netfs_io_request` do not submit I/O, and all of their callers must be checked. For my taste, the whole netfs code needs an overhaul to make reference counting easier to understand and less fragile & obscure. But to fix this bug here and now and produce a patch that is adequate for a stable backport, I tried a minimal approach that quickly frees the request object upon early failure. I decided against adding a second netfs_put_request() each time because that would cause code duplication which obscures the code further. Instead, I added the function netfs_put_failed_request() which frees such a failed request synchronously under the assumption that the reference count is exactly 2 (as initially set by netfs_alloc_request() and never touched), verified by a WARN_ON_ONCE(). It then deinitializes the request object (without going through the "cleanup_work" indirection) and frees the allocation (with RCU protection to protect against concurrent access by netfs_requests_seq_start()). All code paths that fail early have been changed to call netfs_put_failed_request() instead of netfs_put_request(). Additionally, I have added a netfs_put_request() call to netfs_unbuffered_read() as explained above because the netfs_put_failed_request() approach does not work there. | ||||
| CVE-2025-26863 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 3.8 Low |
| Uncontrolled resource consumption in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable denial of service. | ||||
| CVE-2025-39968 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: add max boundary check for VF filters There is no check for max filters that VF can request. Add it. | ||||
| CVE-2025-40083 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: Fix null-deref in agg_dequeue To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c) when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return value before using it, similar to the existing approach in sch_hfsc.c. To avoid code duplication, the following changes are made: 1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static inline function. 2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to include/net/pkt_sched.h so that sch_qfq can reuse it. 3. Applied qdisc_peek_len in agg_dequeue to avoid crashing. | ||||
| CVE-2025-40109 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: rng - Ensure set_ent is always present Ensure that set_ent is always set since only drbg provides it. | ||||
| CVE-2025-40311 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/habanalabs: support mapping cb with vmalloc-backed coherent memory When IOMMU is enabled, dma_alloc_coherent() with GFP_USER may return addresses from the vmalloc range. If such an address is mapped without VM_MIXEDMAP, vm_insert_page() will trigger a BUG_ON due to the VM_PFNMAP restriction. Fix this by checking for vmalloc addresses and setting VM_MIXEDMAP in the VMA before mapping. This ensures safe mapping and avoids kernel crashes. The memory is still driver-allocated and cannot be accessed directly by userspace. | ||||
| CVE-2023-54149 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). | ||||
| CVE-2025-39995 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The following is the trace captured by KASAN. BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup. This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface. | ||||
| CVE-2025-40011 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/gma500: Fix null dereference in hdmi teardown pci_set_drvdata sets the value of pdev->driver_data to NULL, after which the driver_data obtained from the same dev is dereferenced in oaktrail_hdmi_i2c_exit, and the i2c_dev is extracted from it. To prevent this, swap these calls. Found by Linux Verification Center (linuxtesting.org) with Svacer. | ||||