Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
18231 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50837 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path If dsa_tag_8021q_setup() fails, for example due to the inability of the device to install a VLAN, the tag_8021q context of the switch will leak. Make sure it is freed on the error path. | ||||
| CVE-2022-50838 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stream: purge sk_error_queue in sk_stream_kill_queues() Changheon Lee reported TCP socket leaks, with a nice repro. It seems we leak TCP sockets with the following sequence: 1) SOF_TIMESTAMPING_TX_ACK is enabled on the socket. Each ACK will cook an skb put in error queue, from __skb_tstamp_tx(). __skb_tstamp_tx() is using skb_clone(), unless SOF_TIMESTAMPING_OPT_TSONLY was also requested. 2) If the application is also using MSG_ZEROCOPY, then we put in the error queue cloned skbs that had a struct ubuf_info attached to them. Whenever an struct ubuf_info is allocated, sock_zerocopy_alloc() does a sock_hold(). As long as the cloned skbs are still in sk_error_queue, socket refcount is kept elevated. 3) Application closes the socket, while error queue is not empty. Since tcp_close() no longer purges the socket error queue, we might end up with a TCP socket with at least one skb in error queue keeping the socket alive forever. This bug can be (ab)used to consume all kernel memory and freeze the host. We need to purge the error queue, with proper synchronization against concurrent writers. | ||||
| CVE-2022-50839 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: fix potential buffer head reference count leak As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to buffer head buffer head reference count leak. To solve above issue, update 'journal->j_fc_off' before return -EIO. | ||||
| CVE-2022-50840 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: snic: Fix possible UAF in snic_tgt_create() Smatch reports a warning as follows: drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn: '&tgt->list' not removed from list If device_add() fails in snic_tgt_create(), tgt will be freed, but tgt->list will not be removed from snic->disc.tgt_list, then list traversal may cause UAF. Remove from snic->disc.tgt_list before free(). | ||||
| CVE-2022-50842 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Check whether transferred 2D BO is shmem Transferred 2D BO always must be a shmem BO. Add check for that to prevent NULL dereference if userspace passes a VRAM BO. | ||||
| CVE-2022-50844 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix type of second parameter in odn_edit_dpm_table() callback With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:3008:29: error: incompatible function pointer types initializing 'int (*)(void *, uint32_t, long *, uint32_t)' (aka 'int (*)(void *, unsigned int, long *, unsigned int)') with an expression of type 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, uint32_t)' (aka 'int (void *, enum PP_OD_DPM_TABLE_COMMAND, long *, unsigned int)') [-Werror,-Wincompatible-function-pointer-types-strict] .odn_edit_dpm_table = smu_od_edit_dpm_table, ^~~~~~~~~~~~~~~~~~~~~ 1 error generated. There are only two implementations of ->odn_edit_dpm_table() in 'struct amd_pm_funcs': smu_od_edit_dpm_table() and pp_odn_edit_dpm_table(). One has a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND' and the other uses 'u32'. Ultimately, smu_od_edit_dpm_table() calls ->od_edit_dpm_table() from 'struct pptable_funcs' and pp_odn_edit_dpm_table() calls ->odn_edit_dpm_table() from 'struct pp_hwmgr_func', which both have a second parameter type of 'enum PP_OD_DPM_TABLE_COMMAND'. Update the type parameter in both the prototype in 'struct amd_pm_funcs' and pp_odn_edit_dpm_table() to 'enum PP_OD_DPM_TABLE_COMMAND', which cleans up the warning. | ||||
| CVE-2022-50846 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path which will call mmc_free_host(). | ||||
| CVE-2022-50848 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drivers: dio: fix possible memory leak in dio_init() If device_register() returns error, the 'dev' and name needs be freed. Add a release function, and then call put_device() in the error path, so the name is freed in kobject_cleanup() and to the 'dev' is freed in release function. | ||||
| CVE-2022-50849 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP An oops can be induced by running 'cat /proc/kcore > /dev/null' on devices using pstore with the ram backend because kmap_atomic() assumes lowmem pages are accessible with __va(). Unable to handle kernel paging request at virtual address ffffff807ff2b000 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081d87000 [ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: dm_integrity CPU: 7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1 baa443fb8e8477896a370b31a821eb2009f9bfba Hardware name: Google Lazor (rev3 - 8) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x110/0x260 lr : vread+0x194/0x294 sp : ffffffc013ee39d0 x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000 x26: 0000000000001000 x25: ffffffc0085a2000 x24: ffffff802d4b3000 x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21: ffffffc0085a2000 x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffd3073f2e60 x14: ffffffffad588000 x13: 0000000000000000 x12: 0000000000000001 x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b x8 : 0000000000000001 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 : ffffffc013ee3a78 x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000 Call trace: __memcpy+0x110/0x260 read_kcore+0x584/0x778 proc_reg_read+0xb4/0xe4 During early boot, memblock reserves the pages for the ramoops reserved memory node in DT that would otherwise be part of the direct lowmem mapping. Pstore's ram backend reuses those reserved pages to change the memory type (writeback or non-cached) by passing the pages to vmap() (see pfn_to_page() usage in persistent_ram_vmap() for more details) with specific flags. When read_kcore() starts iterating over the vmalloc region, it runs over the virtual address that vmap() returned for ramoops. In aligned_vread() the virtual address is passed to vmalloc_to_page() which returns the page struct for the reserved lowmem area. That lowmem page is passed to kmap_atomic(), which effectively calls page_to_virt() that assumes a lowmem page struct must be directly accessible with __va() and friends. These pages are mapped via vmap() though, and the lowmem mapping was never made, so accessing them via the lowmem virtual address oopses like above. Let's side-step this problem by passing VM_IOREMAP to vmap(). This will tell vread() to not include the ramoops region in the kcore. Instead the area will look like a bunch of zeros. The alternative is to teach kmap() about vmalloc areas that intersect with lowmem. Presumably such a change isn't a one-liner, and there isn't much interest in inspecting the ramoops region in kcore files anyway, so the most expedient route is taken for now. | ||||
| CVE-2025-68344 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: wavefront: Fix integer overflow in sample size validation The wavefront_send_sample() function has an integer overflow issue when validating sample size. The header->size field is u32 but gets cast to int for comparison with dev->freemem Fix by using unsigned comparison to avoid integer overflow. | ||||
| CVE-2025-40091 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix too early devlink_free() in ixgbe_remove() Since ixgbe_adapter is embedded in devlink, calling devlink_free() prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free() to the end. KASAN report: BUG: KASAN: use-after-free in ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] Read of size 8 at addr ffff0000adf813e0 by task bash/2095 CPU: 1 UID: 0 PID: 2095 Comm: bash Tainted: G S 6.17.0-rc2-tnguy.net-queue+ #1 PREEMPT(full) [...] Call trace: show_stack+0x30/0x90 (C) dump_stack_lvl+0x9c/0xd0 print_address_description.constprop.0+0x90/0x310 print_report+0x104/0x1f0 kasan_report+0x88/0x180 __asan_report_load8_noabort+0x20/0x30 ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe] ixgbe_clear_interrupt_scheme+0xf8/0x130 [ixgbe] ixgbe_remove+0x2d0/0x8c0 [ixgbe] pci_device_remove+0xa0/0x220 device_remove+0xb8/0x170 device_release_driver_internal+0x318/0x490 device_driver_detach+0x40/0x68 unbind_store+0xec/0x118 drv_attr_store+0x64/0xb8 sysfs_kf_write+0xcc/0x138 kernfs_fop_write_iter+0x294/0x440 new_sync_write+0x1fc/0x588 vfs_write+0x480/0x6a0 ksys_write+0xf0/0x1e0 __arm64_sys_write+0x70/0xc0 invoke_syscall.constprop.0+0xcc/0x280 el0_svc_common.constprop.0+0xa8/0x248 do_el0_svc+0x44/0x68 el0_svc+0x54/0x160 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 | ||||
| CVE-2025-68342 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing data The URB received in gs_usb_receive_bulk_callback() contains a struct gs_host_frame. The length of the data after the header depends on the gs_host_frame hf::flags and the active device features (e.g. time stamping). Introduce a new function gs_usb_get_minimum_length() and check that we have at least received the required amount of data before accessing it. Only copy the data to that skb that has actually been received. [mkl: rename gs_usb_get_minimum_length() -> +gs_usb_get_minimum_rx_length()] | ||||
| CVE-2025-40021 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: dynevent: Add a missing lockdown check on dynevent Since dynamic_events interface on tracefs is compatible with kprobe_events and uprobe_events, it should also check the lockdown status and reject if it is set. | ||||
| CVE-2022-50850 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ipr: Fix WARNING in ipr_init() ipr_init() will not call unregister_reboot_notifier() when pci_register_driver() fails, which causes a WARNING. Call unregister_reboot_notifier() when pci_register_driver() fails. notifier callback ipr_halt [ipr] already registered WARNING: CPU: 3 PID: 299 at kernel/notifier.c:29 notifier_chain_register+0x16d/0x230 Modules linked in: ipr(+) xhci_pci_renesas xhci_hcd ehci_hcd usbcore led_class gpu_sched drm_buddy video wmi drm_ttm_helper ttm drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks agpgart cfbft CPU: 3 PID: 299 Comm: modprobe Tainted: G W 6.1.0-rc1-00190-g39508d23b672-dirty #332 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:notifier_chain_register+0x16d/0x230 Call Trace: <TASK> __blocking_notifier_chain_register+0x73/0xb0 ipr_init+0x30/0x1000 [ipr] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | ||||
| CVE-2022-50851 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost_vdpa: fix the crash in unmap a large memory While testing in vIOMMU, sometimes Guest will unmap very large memory, which will cause the crash. To fix this, add a new function vhost_vdpa_general_unmap(). This function will only unmap the memory that saved in iotlb. Call Trace: [ 647.820144] ------------[ cut here ]------------ [ 647.820848] kernel BUG at drivers/iommu/intel/iommu.c:1174! [ 647.821486] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 647.822082] CPU: 10 PID: 1181 Comm: qemu-system-x86 Not tainted 6.0.0-rc1home_lulu_2452_lulu7_vhost+ #62 [ 647.823139] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qem4 [ 647.824365] RIP: 0010:domain_unmap+0x48/0x110 [ 647.825424] Code: 48 89 fb 8d 4c f6 1e 39 c1 0f 4f c8 83 e9 0c 83 f9 3f 7f 18 48 89 e8 48 d3 e8 48 85 c0 75 59 [ 647.828064] RSP: 0018:ffffae5340c0bbf0 EFLAGS: 00010202 [ 647.828973] RAX: 0000000000000001 RBX: ffff921793d10540 RCX: 000000000000001b [ 647.830083] RDX: 00000000080000ff RSI: 0000000000000001 RDI: ffff921793d10540 [ 647.831214] RBP: 0000000007fc0100 R08: ffffae5340c0bcd0 R09: 0000000000000003 [ 647.832388] R10: 0000007fc0100000 R11: 0000000000100000 R12: 00000000080000ff [ 647.833668] R13: ffffae5340c0bcd0 R14: ffff921793d10590 R15: 0000008000100000 [ 647.834782] FS: 00007f772ec90640(0000) GS:ffff921ce7a80000(0000) knlGS:0000000000000000 [ 647.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 647.836990] CR2: 00007f02c27a3a20 CR3: 0000000101b0c006 CR4: 0000000000372ee0 [ 647.838107] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 647.839283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 647.840666] Call Trace: [ 647.841437] <TASK> [ 647.842107] intel_iommu_unmap_pages+0x93/0x140 [ 647.843112] __iommu_unmap+0x91/0x1b0 [ 647.844003] iommu_unmap+0x6a/0x95 [ 647.844885] vhost_vdpa_unmap+0x1de/0x1f0 [vhost_vdpa] [ 647.845985] vhost_vdpa_process_iotlb_msg+0xf0/0x90b [vhost_vdpa] [ 647.847235] ? _raw_spin_unlock+0x15/0x30 [ 647.848181] ? _copy_from_iter+0x8c/0x580 [ 647.849137] vhost_chr_write_iter+0xb3/0x430 [vhost] [ 647.850126] vfs_write+0x1e4/0x3a0 [ 647.850897] ksys_write+0x53/0xd0 [ 647.851688] do_syscall_64+0x3a/0x90 [ 647.852508] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 647.853457] RIP: 0033:0x7f7734ef9f4f [ 647.854408] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 76 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c8 [ 647.857217] RSP: 002b:00007f772ec8f040 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 647.858486] RAX: ffffffffffffffda RBX: 00000000fef00000 RCX: 00007f7734ef9f4f [ 647.859713] RDX: 0000000000000048 RSI: 00007f772ec8f090 RDI: 0000000000000010 [ 647.860942] RBP: 00007f772ec8f1a0 R08: 0000000000000000 R09: 0000000000000000 [ 647.862206] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000010 [ 647.863446] R13: 0000000000000002 R14: 0000000000000000 R15: ffffffff01100000 [ 647.864692] </TASK> [ 647.865458] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs v] [ 647.874688] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2022-50854 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: virtual_ncidev: Fix memory leak in virtual_nci_send() skb should be free in virtual_nci_send(), otherwise kmemleak will report memleak. Steps for reproduction (simulated in qemu): cd tools/testing/selftests/nci make ./nci_dev BUG: memory leak unreferenced object 0xffff888107588000 (size 208): comm "nci_dev", pid 206, jiffies 4294945376 (age 368.248s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000008d94c8fd>] __alloc_skb+0x1da/0x290 [<00000000278bc7f8>] nci_send_cmd+0xa3/0x350 [<0000000081256a22>] nci_reset_req+0x6b/0xa0 [<000000009e721112>] __nci_request+0x90/0x250 [<000000005d556e59>] nci_dev_up+0x217/0x5b0 [<00000000e618ce62>] nfc_dev_up+0x114/0x220 [<00000000981e226b>] nfc_genl_dev_up+0x94/0xe0 [<000000009bb03517>] genl_family_rcv_msg_doit.isra.14+0x228/0x2d0 [<00000000b7f8c101>] genl_rcv_msg+0x35c/0x640 [<00000000c94075ff>] netlink_rcv_skb+0x11e/0x350 [<00000000440cfb1e>] genl_rcv+0x24/0x40 [<0000000062593b40>] netlink_unicast+0x43f/0x640 [<000000001d0b13cc>] netlink_sendmsg+0x73a/0xbf0 [<000000003272487f>] __sys_sendto+0x324/0x370 [<00000000ef9f1747>] __x64_sys_sendto+0xdd/0x1b0 [<000000001e437841>] do_syscall_64+0x3f/0x90 | ||||
| CVE-2025-68338 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Don't free uninitialized ksz_irq If something goes wrong at setup, ksz_irq_free() can be called on uninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). It leads to freeing uninitialized IRQ numbers and/or domains. Use dsa_switch_for_each_user_port_continue_reverse() in the error path to iterate only over the fully initialized ports. | ||||
| CVE-2025-40206 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_objref: validate objref and objrefmap expressions Referencing a synproxy stateful object from OUTPUT hook causes kernel crash due to infinite recursive calls: BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12) [...] Call Trace: __find_rr_leaf+0x99/0x230 fib6_table_lookup+0x13b/0x2d0 ip6_pol_route+0xa4/0x400 fib6_rule_lookup+0x156/0x240 ip6_route_output_flags+0xc6/0x150 __nf_ip6_route+0x23/0x50 synproxy_send_tcp_ipv6+0x106/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 nft_synproxy_do_eval+0x263/0x310 nft_do_chain+0x5a8/0x5f0 [nf_tables nft_do_chain_inet+0x98/0x110 nf_hook_slow+0x43/0xc0 __ip6_local_out+0xf0/0x170 ip6_local_out+0x17/0x70 synproxy_send_tcp_ipv6+0x1a2/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 [...] Implement objref and objrefmap expression validate functions. Currently, only NFT_OBJECT_SYNPROXY object type requires validation. This will also handle a jump to a chain using a synproxy object from the OUTPUT hook. Now when trying to reference a synproxy object in the OUTPUT hook, nft will produce the following error: synproxy_crash.nft: Error: Could not process rule: Operation not supported synproxy name mysynproxy ^^^^^^^^^^^^^^^^^^^^^^^^ | ||||
| CVE-2025-40208 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: fix module removal if firmware download failed Fix remove if firmware failed to load: qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2 qcom-iris aa00000.video-codec: firmware download failed qcom-iris aa00000.video-codec: core init failed then: $ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind Triggers: genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ video_cc_mvs0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ video_cc_mvs0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ gcc_video_axi0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ------------[ cut here ]------------ gcc_video_axi0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- Skip deinit if initialization never succeeded. | ||||
| CVE-2022-50855 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: prevent leak of lsm program after failed attach In [0], we added the ability to bpf_prog_attach LSM programs to cgroups, but in our validation to make sure the prog is meant to be attached to BPF_LSM_CGROUP, we return too early if the check fails. This results in lack of decrementing prog's refcnt (through bpf_prog_put) leaving the LSM program alive past the point of the expected lifecycle. This fix allows for the decrement to take place. [0] https://lore.kernel.org/all/20220628174314.1216643-4-sdf@google.com/ | ||||