Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
18317 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mount: handle NULL values in mnt_ns_release() When calling in listmount() mnt_ns_release() may be passed a NULL pointer. Handle that case gracefully. | ||||
| CVE-2022-50659 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: geode - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. We add a new struct 'amd_geode_priv' to record pointer of the pci_dev and membase, and then add missing pci_dev_put() for the normal and error path. | ||||
| CVE-2022-50663 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix possible memory leak in stmmac_dvr_probe() The bitmap_free() should be called to free priv->af_xdp_zc_qps when create_singlethread_workqueue() fails, otherwise there will be a memory leak, so we add the err path error_wq_init to fix it. | ||||
| CVE-2023-54193 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: remove block_cb from driver_list before freeing Error handler of tcf_block_bind() frees the whole bo->cb_list on error. However, by that time the flow_block_cb instances are already in the driver list because driver ndo_setup_tc() callback is called before that up the call chain in tcf_block_offload_cmd(). This leaves dangling pointers to freed objects in the list and causes use-after-free[0]. Fix it by also removing flow_block_cb instances from driver_list before deallocating them. [0]: [ 279.868433] ================================================================== [ 279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0 [ 279.871527] Read of size 8 at addr ffff888147e2bf20 by task tc/2963 [ 279.873151] CPU: 6 PID: 2963 Comm: tc Not tainted 6.3.0-rc6+ #4 [ 279.874273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 279.876295] Call Trace: [ 279.876882] <TASK> [ 279.877413] dump_stack_lvl+0x33/0x50 [ 279.878198] print_report+0xc2/0x610 [ 279.878987] ? flow_block_cb_setup_simple+0x631/0x7c0 [ 279.879994] kasan_report+0xae/0xe0 [ 279.880750] ? flow_block_cb_setup_simple+0x631/0x7c0 [ 279.881744] ? mlx5e_tc_reoffload_flows_work+0x240/0x240 [mlx5_core] [ 279.883047] flow_block_cb_setup_simple+0x631/0x7c0 [ 279.884027] tcf_block_offload_cmd.isra.0+0x189/0x2d0 [ 279.885037] ? tcf_block_setup+0x6b0/0x6b0 [ 279.885901] ? mutex_lock+0x7d/0xd0 [ 279.886669] ? __mutex_unlock_slowpath.constprop.0+0x2d0/0x2d0 [ 279.887844] ? ingress_init+0x1c0/0x1c0 [sch_ingress] [ 279.888846] tcf_block_get_ext+0x61c/0x1200 [ 279.889711] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.890682] ? clsact_init+0x2b0/0x2b0 [sch_ingress] [ 279.891701] qdisc_create+0x401/0xea0 [ 279.892485] ? qdisc_tree_reduce_backlog+0x470/0x470 [ 279.893473] tc_modify_qdisc+0x6f7/0x16d0 [ 279.894344] ? tc_get_qdisc+0xac0/0xac0 [ 279.895213] ? mutex_lock+0x7d/0xd0 [ 279.896005] ? __mutex_lock_slowpath+0x10/0x10 [ 279.896910] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.897770] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 279.898672] ? __sys_sendmsg+0xb5/0x140 [ 279.899494] ? do_syscall_64+0x3d/0x90 [ 279.900302] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.901337] ? kasan_save_stack+0x2e/0x40 [ 279.902177] ? kasan_save_stack+0x1e/0x40 [ 279.903058] ? kasan_set_track+0x21/0x30 [ 279.903913] ? kasan_save_free_info+0x2a/0x40 [ 279.904836] ? ____kasan_slab_free+0x11a/0x1b0 [ 279.905741] ? kmem_cache_free+0x179/0x400 [ 279.906599] netlink_rcv_skb+0x12c/0x360 [ 279.907450] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 279.908360] ? netlink_ack+0x1550/0x1550 [ 279.909192] ? rhashtable_walk_peek+0x170/0x170 [ 279.910135] ? kmem_cache_alloc_node+0x1af/0x390 [ 279.911086] ? _copy_from_iter+0x3d6/0xc70 [ 279.912031] netlink_unicast+0x553/0x790 [ 279.912864] ? netlink_attachskb+0x6a0/0x6a0 [ 279.913763] ? netlink_recvmsg+0x416/0xb50 [ 279.914627] netlink_sendmsg+0x7a1/0xcb0 [ 279.915473] ? netlink_unicast+0x790/0x790 [ 279.916334] ? iovec_from_user.part.0+0x4d/0x220 [ 279.917293] ? netlink_unicast+0x790/0x790 [ 279.918159] sock_sendmsg+0xc5/0x190 [ 279.918938] ____sys_sendmsg+0x535/0x6b0 [ 279.919813] ? import_iovec+0x7/0x10 [ 279.920601] ? kernel_sendmsg+0x30/0x30 [ 279.921423] ? __copy_msghdr+0x3c0/0x3c0 [ 279.922254] ? import_iovec+0x7/0x10 [ 279.923041] ___sys_sendmsg+0xeb/0x170 [ 279.923854] ? copy_msghdr_from_user+0x110/0x110 [ 279.924797] ? ___sys_recvmsg+0xd9/0x130 [ 279.925630] ? __perf_event_task_sched_in+0x183/0x470 [ 279.926656] ? ___sys_sendmsg+0x170/0x170 [ 279.927529] ? ctx_sched_in+0x530/0x530 [ 279.928369] ? update_curr+0x283/0x4f0 [ 279.929185] ? perf_event_update_userpage+0x570/0x570 [ 279.930201] ? __fget_light+0x57/0x520 [ 279.931023] ? __switch_to+0x53d/0xe70 [ 27 ---truncated--- | ||||
| CVE-2025-68782 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Reset t_task_cdb pointer in error case If allocation of cmd->t_task_cdb fails, it remains NULL but is later dereferenced in the 'err' path. In case of error, reset NULL t_task_cdb value to point at the default fixed-size buffer. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2023-54083 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: tegra: xusb: Clear the driver reference in usb-phy dev For the dual-role port, it will assign the phy dev to usb-phy dev and use the port dev driver as the dev driver of usb-phy. When we try to destroy the port dev, it will destroy its dev driver as well. But we did not remove the reference from usb-phy dev. This might cause the use-after-free issue in KASAN. | ||||
| CVE-2023-54157 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF of alloc->vma in race with munmap() [ cmllamas: clean forward port from commit 015ac18be7de ("binder: fix UAF of alloc->vma in race with munmap()") in 5.10 stable. It is needed in mainline after the revert of commit a43cfc87caaf ("android: binder: stop saving a pointer to the VMA") as pointed out by Liam. The commit log and tags have been tweaked to reflect this. ] In commit 720c24192404 ("ANDROID: binder: change down_write to down_read") binder assumed the mmap read lock is sufficient to protect alloc->vma inside binder_update_page_range(). This used to be accurate until commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"), which now downgrades the mmap_lock after detaching the vma from the rbtree in munmap(). Then it proceeds to teardown and free the vma with only the read lock held. This means that accesses to alloc->vma in binder_update_page_range() now will race with vm_area_free() in munmap() and can cause a UAF as shown in the following KASAN trace: ================================================================== BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0 Read of size 8 at addr ffff16204ad00600 by task server/558 CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x18/0x2c dump_stack+0xf8/0x164 print_address_description.constprop.0+0x9c/0x538 kasan_report+0x120/0x200 __asan_load8+0xa0/0xc4 vm_insert_page+0x7c/0x1f0 binder_update_page_range+0x278/0x50c binder_alloc_new_buf+0x3f0/0xba0 binder_transaction+0x64c/0x3040 binder_thread_write+0x924/0x2020 binder_ioctl+0x1610/0x2e5c __arm64_sys_ioctl+0xd4/0x120 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Allocated by task 559: kasan_save_stack+0x38/0x6c __kasan_kmalloc.constprop.0+0xe4/0xf0 kasan_slab_alloc+0x18/0x2c kmem_cache_alloc+0x1b0/0x2d0 vm_area_alloc+0x28/0x94 mmap_region+0x378/0x920 do_mmap+0x3f0/0x600 vm_mmap_pgoff+0x150/0x17c ksys_mmap_pgoff+0x284/0x2dc __arm64_sys_mmap+0x84/0xa4 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Freed by task 560: kasan_save_stack+0x38/0x6c kasan_set_track+0x28/0x40 kasan_set_free_info+0x24/0x4c __kasan_slab_free+0x100/0x164 kasan_slab_free+0x14/0x20 kmem_cache_free+0xc4/0x34c vm_area_free+0x1c/0x2c remove_vma+0x7c/0x94 __do_munmap+0x358/0x710 __vm_munmap+0xbc/0x130 __arm64_sys_munmap+0x4c/0x64 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 [...] ================================================================== To prevent the race above, revert back to taking the mmap write lock inside binder_update_page_range(). One might expect an increase of mmap lock contention. However, binder already serializes these calls via top level alloc->mutex. Also, there was no performance impact shown when running the binder benchmark tests. | ||||
| CVE-2023-54180 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: handle case when repair happens with dev-replace [BUG] There is a bug report that a BUG_ON() in btrfs_repair_io_failure() (originally repair_io_failure() in v6.0 kernel) got triggered when replacing a unreliable disk: BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3 kernel BUG at fs/btrfs/extent_io.c:2380! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2 Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs] Call Trace: <TASK> clean_io_failure+0x14d/0x180 [btrfs] end_bio_extent_readpage+0x412/0x6e0 [btrfs] ? __switch_to+0x106/0x420 process_one_work+0x1c7/0x380 worker_thread+0x4d/0x380 ? rescuer_thread+0x3a0/0x3a0 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 [CAUSE] Before the BUG_ON(), we got some read errors from the replace target first, note the mirror number (3, which is beyond RAID1 duplication, thus it's read from the replace target device). Then at the BUG_ON() location, we are trying to writeback the repaired sectors back the failed device. The check looks like this: ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical, &map_length, &bioc, mirror_num); if (ret) goto out_counter_dec; BUG_ON(mirror_num != bioc->mirror_num); But inside btrfs_map_block(), we can modify bioc->mirror_num especially for dev-replace: if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 && !need_full_stripe(op) && dev_replace->tgtdev != NULL) { ret = get_extra_mirror_from_replace(fs_info, logical, *length, dev_replace->srcdev->devid, &mirror_num, &physical_to_patch_in_first_stripe); patch_the_first_stripe_for_dev_replace = 1; } Thus if we're repairing the replace target device, we're going to trigger that BUG_ON(). But in reality, the read failure from the replace target device may be that, our replace hasn't reached the range we're reading, thus we're reading garbage, but with replace running, the range would be properly filled later. Thus in that case, we don't need to do anything but let the replace routine to handle it. [FIX] Instead of a BUG_ON(), just skip the repair if we're repairing the device replace target device. | ||||
| CVE-2025-40083 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: Fix null-deref in agg_dequeue To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c) when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return value before using it, similar to the existing approach in sch_hfsc.c. To avoid code duplication, the following changes are made: 1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static inline function. 2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to include/net/pkt_sched.h so that sch_qfq can reuse it. 3. Applied qdisc_peek_len in agg_dequeue to avoid crashing. | ||||
| CVE-2025-39968 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: add max boundary check for VF filters There is no check for max filters that VF can request. Add it. | ||||
| CVE-2025-68818 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path" This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9. The commit being reverted added code to __qla2x00_abort_all_cmds() to call sp->done() without holding a spinlock. But unlike the older code below it, this new code failed to check sp->cmd_type and just assumed TYPE_SRB, which results in a jump to an invalid pointer in target-mode with TYPE_TGT_CMD: qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success 0000000009f7a79b qla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h. qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no buffer qla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event 0x8002 occurred qla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery - ha=0000000058183fda. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor instruction fetch in kernel mode PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1 Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206 RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000 RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0 RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045 R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40 R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400 FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x4d/0x8b ? page_fault_oops+0x91/0x180 ? trace_buffer_unlock_commit_regs+0x38/0x1a0 ? exc_page_fault+0x391/0x5e0 ? asm_exc_page_fault+0x22/0x30 __qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst] qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst] qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst] qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst] qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst] kthread+0xa8/0xd0 </TASK> Then commit 4475afa2646d ("scsi: qla2xxx: Complete command early within lock") added the spinlock back, because not having the lock caused a race and a crash. But qla2x00_abort_srb() in the switch below already checks for qla2x00_chip_is_down() and handles it the same way, so the code above the switch is now redundant and still buggy in target-mode. Remove it. | ||||
| CVE-2023-54059 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: soc: mediatek: mtk-svs: Enable the IRQ later If the system does not come from reset (like when is booted via kexec()), the peripheral might triger an IRQ before the data structures are initialised. [ 0.227710] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000f08 [ 0.227913] Call trace: [ 0.227918] svs_isr+0x8c/0x538 | ||||
| CVE-2023-54164 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix iso_conn related locking and validity issues sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations that check/update sk_state and access conn should hold lock_sock, otherwise they can race. The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock, which is how it is in connect/disconnect_cfm -> iso_conn_del -> iso_chan_del. Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock around updating sk_state and conn. iso_conn_del must not occur during iso_connect_cis/bis, as it frees the iso_conn. Hold hdev->lock longer to prevent that. This should not reintroduce the issue fixed in commit 241f51931c35 ("Bluetooth: ISO: Avoid circular locking dependency"), since the we acquire locks in order. We retain the fix in iso_sock_connect to release lock_sock before iso_connect_* acquires hdev->lock. Similarly for commit 6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency"). We retain the fix in iso_conn_ready to not acquire iso_conn_lock before lock_sock. iso_conn_add shall return iso_conn with valid hcon. Make it so also when reusing an old CIS connection waiting for disconnect timeout (see __iso_sock_close where conn->hcon is set to NULL). Trace with iso_conn_del after iso_chan_add in iso_connect_cis: =============================================================== iso_sock_create:771: sock 00000000be9b69b7 iso_sock_init:693: sk 000000004dff667e iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1 iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_connect:875: sk 000000004dff667e iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e __iso_chan_add:214: conn 00000000daf8625e iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12 iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16 iso_sock_clear_timer:117: sock 000000004dff667e state 3 <Note: sk_state is BT_BOUND (3), so iso_connect_cis is still running at this point> iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16 hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535 hci_conn_unlink:1102: hci0: hcon 000000007b65d182 hci_chan_list_flush:2780: hcon 000000007b65d182 iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1 __iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7 <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it must be that iso_chan_del occurred between iso_chan_add and end of iso_connect_cis.> BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth =============================================================== Trace with iso_conn_del before iso_chan_add in iso_connect_cis: =============================================================== iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504 hci_dev_put:1487: hci0 orig refcnt 21 hci_event_packet:7607: hci0: e ---truncated--- | ||||
| CVE-2023-53838 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: synchronize atomic write aborts To fix a race condition between atomic write aborts, I use the inode lock and make COW inode to be re-usable thoroughout the whole atomic file inode lifetime. | ||||
| CVE-2023-53816 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix potential kgd_mem UAFs kgd_mem pointers returned by kfd_process_device_translate_handle are only guaranteed to be valid while p->mutex is held. As soon as the mutex is unlocked, another thread can free the BO. | ||||
| CVE-2023-53993 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y After a pci_doe_task completes, its work_struct needs to be destroyed to avoid a memory leak with CONFIG_DEBUG_OBJECTS=y. | ||||
| CVE-2025-26863 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 3.8 Low |
| Uncontrolled resource consumption in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable denial of service. | ||||
| CVE-2023-54060 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Set end correctly when doing batch carry Even though the test suite covers this it somehow became obscured that this wasn't working. The test iommufd_ioas.mock_domain.access_domain_destory would blow up rarely. end should be set to 1 because this just pushed an item, the carry, to the pfns list. Sometimes the test would blow up with: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 5 PID: 584 Comm: iommufd Not tainted 6.5.0-rc1-dirty #1236 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:batch_unpin+0xa2/0x100 [iommufd] Code: 17 48 81 fe ff ff 07 00 77 70 48 8b 15 b7 be 97 e2 48 85 d2 74 14 48 8b 14 fa 48 85 d2 74 0b 40 0f b6 f6 48 c1 e6 04 48 01 f2 <48> 8b 3a 48 c1 e0 06 89 ca 48 89 de 48 83 e7 f0 48 01 c7 e8 96 dc RSP: 0018:ffffc90001677a58 EFLAGS: 00010246 RAX: 00007f7e2646f000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 00000000fefc4c8d RDI: 0000000000fefc4c RBP: ffffc90001677a80 R08: 0000000000000048 R09: 0000000000000200 R10: 0000000000030b98 R11: ffffffff81f3bb40 R12: 0000000000000001 R13: ffff888101f75800 R14: ffffc90001677ad0 R15: 00000000000001fe FS: 00007f9323679740(0000) GS:ffff8881ba540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000105ede003 CR4: 00000000003706a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x5c/0x70 ? __die+0x1f/0x60 ? page_fault_oops+0x15d/0x440 ? lock_release+0xbc/0x240 ? exc_page_fault+0x4a4/0x970 ? asm_exc_page_fault+0x27/0x30 ? batch_unpin+0xa2/0x100 [iommufd] ? batch_unpin+0xba/0x100 [iommufd] __iopt_area_unfill_domain+0x198/0x430 [iommufd] ? __mutex_lock+0x8c/0xb80 ? __mutex_lock+0x6aa/0xb80 ? xa_erase+0x28/0x30 ? iopt_table_remove_domain+0x162/0x320 [iommufd] ? lock_release+0xbc/0x240 iopt_area_unfill_domain+0xd/0x10 [iommufd] iopt_table_remove_domain+0x195/0x320 [iommufd] iommufd_hw_pagetable_destroy+0xb3/0x110 [iommufd] iommufd_object_destroy_user+0x8e/0xf0 [iommufd] iommufd_device_detach+0xc5/0x140 [iommufd] iommufd_selftest_destroy+0x1f/0x70 [iommufd] iommufd_object_destroy_user+0x8e/0xf0 [iommufd] iommufd_destroy+0x3a/0x50 [iommufd] iommufd_fops_ioctl+0xfb/0x170 [iommufd] __x64_sys_ioctl+0x40d/0x9a0 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2022-50862 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: prevent decl_tag from being referenced in func_proto Syzkaller was able to hit the following issue: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3609 at kernel/bpf/btf.c:1946 btf_type_id_size+0x2d5/0x9d0 kernel/bpf/btf.c:1946 Modules linked in: CPU: 0 PID: 3609 Comm: syz-executor361 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 RIP: 0010:btf_type_id_size+0x2d5/0x9d0 kernel/bpf/btf.c:1946 Code: ef e8 7f 8e e4 ff 41 83 ff 0b 77 28 f6 44 24 10 18 75 3f e8 6d 91 e4 ff 44 89 fe bf 0e 00 00 00 e8 20 8e e4 ff e8 5b 91 e4 ff <0f> 0b 45 31 f6 e9 98 02 00 00 41 83 ff 12 74 18 e8 46 91 e4 ff 44 RSP: 0018:ffffc90003cefb40 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8880259c0000 RSI: ffffffff81968415 RDI: 0000000000000005 RBP: ffff88801270ca00 R08: 0000000000000005 R09: 000000000000000e R10: 0000000000000011 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000011 R14: ffff888026ee6424 R15: 0000000000000011 FS: 000055555641b300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000f2e258 CR3: 000000007110e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btf_func_proto_check kernel/bpf/btf.c:4447 [inline] btf_check_all_types kernel/bpf/btf.c:4723 [inline] btf_parse_type_sec kernel/bpf/btf.c:4752 [inline] btf_parse kernel/bpf/btf.c:5026 [inline] btf_new_fd+0x1926/0x1e70 kernel/bpf/btf.c:6892 bpf_btf_load kernel/bpf/syscall.c:4324 [inline] __sys_bpf+0xb7d/0x4cf0 kernel/bpf/syscall.c:5010 __do_sys_bpf kernel/bpf/syscall.c:5069 [inline] __se_sys_bpf kernel/bpf/syscall.c:5067 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:5067 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f0fbae41c69 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc8aeb6228 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0fbae41c69 RDX: 0000000000000020 RSI: 0000000020000140 RDI: 0000000000000012 RBP: 00007f0fbae05e10 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000246 R12: 00007f0fbae05ea0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Looks like it tries to create a func_proto which return type is decl_tag. For the details, see Martin's spot on analysis in [0]. 0: https://lore.kernel.org/bpf/CAKH8qBuQDLva_hHxxBuZzyAcYNO4ejhovz6TQeVSk8HY-2SO6g@mail.gmail.com/T/#mea6524b3fcd6298347432226e81b1e6155efc62c | ||||
| CVE-2022-50713 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Fix memory leak in visconti_register_pll() @pll->rate_table has allocated memory by kmemdup(), if clk_hw_register() fails, it should be freed, otherwise it will cause memory leak issue, this patch fixes it. | ||||