Filtered by vendor Redhat
Subscriptions
Filtered by product Openshift
Subscriptions
Total
1163 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-29483 | 5 Dnspython, Eventlet, Fedoraproject and 2 more | 9 Dnspython, Eventlet, Fedora and 6 more | 2025-11-04 | 7 High |
| eventlet before 0.35.2, as used in dnspython before 2.6.0, allows remote attackers to interfere with DNS name resolution by quickly sending an invalid packet from the expected IP address and source port, aka a "TuDoor" attack. In other words, dnspython does not have the preferred behavior in which the DNS name resolution algorithm would proceed, within the full time window, in order to wait for a valid packet. NOTE: dnspython 2.6.0 is unusable for a different reason that was addressed in 2.6.1. | ||||
| CVE-2024-45492 | 3 Libexpat, Libexpat Project, Redhat | 5 Expat, Libexpat, Enterprise Linux and 2 more | 2025-11-04 | 7.3 High |
| An issue was discovered in libexpat before 2.6.3. nextScaffoldPart in xmlparse.c can have an integer overflow for m_groupSize on 32-bit platforms (where UINT_MAX equals SIZE_MAX). | ||||
| CVE-2024-45491 | 3 Libexpat, Libexpat Project, Redhat | 5 Expat, Libexpat, Enterprise Linux and 2 more | 2025-11-04 | 7.3 High |
| An issue was discovered in libexpat before 2.6.3. dtdCopy in xmlparse.c can have an integer overflow for nDefaultAtts on 32-bit platforms (where UINT_MAX equals SIZE_MAX). | ||||
| CVE-2024-45490 | 2 Libexpat Project, Redhat | 5 Libexpat, Enterprise Linux, Jboss Core Services and 2 more | 2025-11-04 | 9.8 Critical |
| An issue was discovered in libexpat before 2.6.3. xmlparse.c does not reject a negative length for XML_ParseBuffer. | ||||
| CVE-2024-53197 | 3 Debian, Linux, Redhat | 10 Debian Linux, Linux Kernel, Enterprise Linux and 7 more | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usb_get_configuration for allocating dev->config. This can lead to out-of-bounds accesses later, e.g. in usb_destroy_configuration. | ||||
| CVE-2024-53104 | 3 Debian, Linux, Redhat | 10 Debian Linux, Linux Kernel, Enterprise Linux and 7 more | 2025-11-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format This can lead to out of bounds writes since frames of this type were not taken into account when calculating the size of the frames buffer in uvc_parse_streaming. | ||||
| CVE-2024-50302 | 4 Debian, Google, Linux and 1 more | 11 Debian Linux, Android, Linux Kernel and 8 more | 2025-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: zero-initialize the report buffer Since the report buffer is used by all kinds of drivers in various ways, let's zero-initialize it during allocation to make sure that it can't be ever used to leak kernel memory via specially-crafted report. | ||||
| CVE-2023-44270 | 2 Postcss, Redhat | 7 Postcss, Discovery, Openshift and 4 more | 2025-11-03 | 5.3 Medium |
| An issue was discovered in PostCSS before 8.4.31. The vulnerability affects linters using PostCSS to parse external untrusted CSS. An attacker can prepare CSS in such a way that it will contains parts parsed by PostCSS as a CSS comment. After processing by PostCSS, it will be included in the PostCSS output in CSS nodes (rules, properties) despite being included in a comment. | ||||
| CVE-2023-26159 | 2 Follow-redirects, Redhat | 14 Follow Redirects, Acm, Cluster Observability Operator and 11 more | 2025-11-03 | 7.3 High |
| Versions of the package follow-redirects before 1.15.4 are vulnerable to Improper Input Validation due to the improper handling of URLs by the url.parse() function. When new URL() throws an error, it can be manipulated to misinterpret the hostname. An attacker could exploit this weakness to redirect traffic to a malicious site, potentially leading to information disclosure, phishing attacks, or other security breaches. | ||||
| CVE-2021-43859 | 6 Debian, Fedoraproject, Jenkins and 3 more | 14 Debian Linux, Fedora, Jenkins and 11 more | 2025-11-03 | 7.5 High |
| XStream is an open source java library to serialize objects to XML and back again. Versions prior to 1.4.19 may allow a remote attacker to allocate 100% CPU time on the target system depending on CPU type or parallel execution of such a payload resulting in a denial of service only by manipulating the processed input stream. XStream 1.4.19 monitors and accumulates the time it takes to add elements to collections and throws an exception if a set threshold is exceeded. Users are advised to upgrade as soon as possible. Users unable to upgrade may set the NO_REFERENCE mode to prevent recursion. See GHSA-rmr5-cpv2-vgjf for further details on a workaround if an upgrade is not possible. | ||||
| CVE-2021-23566 | 2 Nanoid Project, Redhat | 4 Nanoid, Acm, Openshift and 1 more | 2025-11-03 | 4 Medium |
| The package nanoid from 3.0.0 and before 3.1.31 are vulnerable to Information Exposure via the valueOf() function which allows to reproduce the last id generated. | ||||
| CVE-2024-56171 | 3 Netapp, Redhat, Xmlsoft | 28 Active Iq Unified Manager, H300s, H300s Firmware and 25 more | 2025-11-03 | 7.8 High |
| libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a use-after-free in xmlSchemaIDCFillNodeTables and xmlSchemaBubbleIDCNodeTables in xmlschemas.c. To exploit this, a crafted XML document must be validated against an XML schema with certain identity constraints, or a crafted XML schema must be used. | ||||
| CVE-2024-55549 | 2 Redhat, Xmlsoft | 8 Enterprise Linux, Openshift, Rhel Aus and 5 more | 2025-11-03 | 7.8 High |
| xsltGetInheritedNsList in libxslt before 1.1.43 has a use-after-free issue related to exclusion of result prefixes. | ||||
| CVE-2024-48910 | 2 Cure53, Redhat | 4 Dompurify, Advanced Cluster Security, Openshift and 1 more | 2025-11-03 | 9.1 Critical |
| DOMPurify is a DOM-only, super-fast, uber-tolerant XSS sanitizer for HTML, MathML and SVG. DOMPurify was vulnerable to prototype pollution. This vulnerability is fixed in 2.4.2. | ||||
| CVE-2024-47875 | 2 Cure53, Redhat | 6 Dompurify, Enterprise Linux, Logging and 3 more | 2025-11-03 | 10 Critical |
| DOMPurify is a DOM-only, super-fast, uber-tolerant XSS sanitizer for HTML, MathML and SVG. DOMpurify was vulnerable to nesting-based mXSS. This vulnerability is fixed in 2.5.0 and 3.1.3. | ||||
| CVE-2023-39615 | 2 Redhat, Xmlsoft | 6 Enterprise Linux, Jboss Core Services, Openshift and 3 more | 2025-11-03 | 6.5 Medium |
| Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor's position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input. | ||||
| CVE-2022-49043 | 2 Redhat, Xmlsoft | 6 Discovery, Enterprise Linux, Openshift and 3 more | 2025-11-03 | 8.1 High |
| xmlXIncludeAddNode in xinclude.c in libxml2 before 2.11.0 has a use-after-free. | ||||
| CVE-2024-56326 | 2 Palletsprojects, Redhat | 15 Jinja, Ansible Automation Platform, Discovery and 12 more | 2025-11-03 | 7.8 High |
| Jinja is an extensible templating engine. Prior to 3.1.5, An oversight in how the Jinja sandboxed environment detects calls to str.format allows an attacker that controls the content of a template to execute arbitrary Python code. To exploit the vulnerability, an attacker needs to control the content of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates. Jinja's sandbox does catch calls to str.format and ensures they don't escape the sandbox. However, it's possible to store a reference to a malicious string's format method, then pass that to a filter that calls it. No such filters are built-in to Jinja, but could be present through custom filters in an application. After the fix, such indirect calls are also handled by the sandbox. This vulnerability is fixed in 3.1.5. | ||||
| CVE-2024-43799 | 2 Redhat, Send Project | 11 Discovery, Network Observ Optr, Openshift and 8 more | 2025-11-03 | 5 Medium |
| Send is a library for streaming files from the file system as a http response. Send passes untrusted user input to SendStream.redirect() which executes untrusted code. This issue is patched in send 0.19.0. | ||||
| CVE-2023-47108 | 2 Opentelemetry, Redhat | 6 Opentelemetry, Acm, Multicluster Engine and 3 more | 2025-10-28 | 7.5 High |
| OpenTelemetry-Go Contrib is a collection of third-party packages for OpenTelemetry-Go. Starting in version 0.37.0 and prior to version 0.46.0, the grpc Unary Server Interceptor out of the box adds labels `net.peer.sock.addr` and `net.peer.sock.port` that have unbound cardinality. It leads to the server's potential memory exhaustion when many malicious requests are sent. An attacker can easily flood the peer address and port for requests. Version 0.46.0 contains a fix for this issue. As a workaround to stop being affected, a view removing the attributes can be used. The other possibility is to disable grpc metrics instrumentation by passing `otelgrpc.WithMeterProvider` option with `noop.NewMeterProvider`. | ||||