Total
15327 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-16996 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 8.8 High |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to an integer underflow. | ||||
| CVE-2026-17003 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 7.7 High |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to compromise the confidentiality and integrity of the system due to an out-of-bounds write. | ||||
| CVE-2026-17120 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 5.3 Medium |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to a buffer overflow. | ||||
| CVE-2026-17122 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 9.8 Critical |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a stack-based buffer overflow. | ||||
| CVE-2026-17141 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 9.8 Critical |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a buffer overflow. | ||||
| CVE-2026-17152 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 9.8 Critical |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a buffer overflow. | ||||
| CVE-2026-17157 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 9.8 Critical |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a stack buffer overflow. | ||||
| CVE-2026-18832 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 8.8 High |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a heap-based buffer overflow. | ||||
| CVE-2026-18828 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 5.4 Medium |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to a stack-based buffer overflow. | ||||
| CVE-2026-17436 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 8.8 High |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a heap-based buffer overflow. | ||||
| CVE-2026-17425 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 7.5 High |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to a stack buffer overflow. | ||||
| CVE-2026-17422 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 9.3 Critical |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to a buffer overflow. | ||||
| CVE-2026-17195 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 6.5 Medium |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to cause a denial of service due to an out-of-bounds write. | ||||
| CVE-2026-17168 | 1 Ibm | 3 Aix, Powervm Vios, Vios | 2026-08-25 | 8.5 High |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote authenticated attacker to execute arbitrary code due to a stack-based buffer overflow. | ||||
| CVE-2026-43125 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dlm: validate length in dlm_search_rsb_tree The len parameter in dlm_dump_rsb_name() is not validated and comes from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can cause out-of-bounds write in dlm_search_rsb_tree(). Add length validation to prevent potential buffer overflow. | ||||
| CVE-2026-42055 | 2 F5, Redhat | 11 Dos, Nginx Gateway Fabric, Nginx Ingress Controller and 8 more | 2026-08-25 | 8.1 High |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_proxy_v2_module and ngx_http_grpc_module modules. This vulnerability exists when the proxy_http_version to 2 or grpc_pass directives are used to proxy HTTP/2 traffic, the ignore_invalid_headers directive is set to off, and the large_client_header_buffers directive size is larger than 2 megabytes. A remote, unauthenticated attacker, along with conditions beyond their control, could send large headers while creating an upstream request. This may cause a heap-based buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-74711 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix type confusion in notification logic Sashiko reports: At the start of the loop in pmbus_notify(), the code unconditionally casts every attribute to a struct sensor_device_attribute: drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() { for (i = 0; i < data->num_attributes; i++) { struct device_attribute *da = to_dev_attr(data->group.attrs[i]); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int index = attr->index; ... } However, data->group.attrs can contain other types like struct pmbus_samples_reg or struct pmbus_sensor, which only embed a base struct device_attribute. If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting it to struct sensor_device_attribute and reading the index field appears to access memory past the end of the allocation, which might trigger a slab-out-of-bounds read. Additionally, if da is a struct pmbus_sensor, casting it causes the index field to overlap with the page, phase, and reg fields. Could this produce a garbage mask on little-endian systems that spuriously matches the target reg, page, and flags during an alert? Fix the problem by using struct sensor_device_attr in struct pmbus_sensor and struct pmbus_label. Since those attributes never trigger a notification, set the value of attr->index to -1 for them. Use this value to distinguish from boolean attributes which _can_ trigger a notification and use the index field to encode mask, page, and register values. | ||||
| CVE-2026-74670 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: stop estimator after disabled calc phase IPVS estimator kthread 0 starts with zeroed chain and tick limits until its initial calculation phase completes. If network namespace teardown clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return without installing positive limits. The kthread can then continue into its main loop and drain est_temp_list with zero chain_max, tick_max and est_max_count values. Each enqueue consumes one available tick row, but est_count never reaches the zero est_max_count value. After all rows are consumed, the row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes past the ticks and tick_len arrays. Exit kthread 0 after the calculation phase if the kthread is stopping or IPVS has been disabled. That keeps temporary estimators from being drained after the limits failed to initialize. Estimator kthreads can now self-exit before teardown or reload stops kd->task. Keep an extra task reference after creation and release it with kthread_stop_put(), so kd->task remains valid until the stop paths consume that reference. | ||||
| CVE-2026-74611 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tls: rx: restore msg_iter before TLS 1.3 optimistic retry tls_decrypt_sg() advances msg->msg_iter when it maps user pages for the optimistic TLS 1.3 zero-copy path. If the decrypted record turns out not to be unpadded application data, tls_decrypt_sw() retries into a kernel skb, but leaves the iterator advanced. The subsequent copy from the skb then writes decrypted bytes again at a later point in the caller iovecs while recvmsg() reports only the post-retry length. A TLS peer can trigger this after the receiver enables TLS_RX_EXPECT_NO_PAD. Revert the iterator by the number of bytes consumed by the optimistic mapping before retrying without zero-copy. Add a selftest which sends a TLS 1.3 control record with TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not overwrite later iovecs beyond the returned length. | ||||
| CVE-2026-74640 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: fix OOB write in fcp_meter_ctl_get() fcp_ioctl_set_meter_map() bounds the user-supplied Level Meter map size by the driver's own limit of 255 if (map.map_size < 1 || map.map_size > 255 || map.meter_slots < 1 || map.meter_slots > 255) return -EINVAL; and passes it to fcp_add_new_ctl() as the control's channel count, where it is stored as elem->channels. Every control read writes into struct snd_ctl_elem_value, whose integer array is declared long value[128], so the limit is 128, not 255. fcp_meter_ctl_get() stores one 64-bit word per channel into that array with no bound of its own: for (i = 0; i < elem->channels; i++) { int idx = private->meter_level_map[i]; int value = idx < 0 ? 0 : le32_to_cpu(resp[idx]); ucontrol->value.integer.value[i] = value; } snd_ctl_elem_read_user() serves that object from memdup_user(_control, sizeof(*control)), 1224 bytes on LP64 out of kmalloc-2048. offsetof(struct snd_ctl_elem_value, value) is 72, so element i is written at byte 72 + 8 * i and element 144 already lands past the allocation. At map_size 255 the last store ends at byte 2112, 888 bytes past the object and 64 bytes into the adjacent slab object. The stored words come from the device and meter_level_map[] selects which word lands in which slot, so extent and contents are both controlled. The core does not catch this. snd_ctl_check_elem_info() is reached only from __snd_ctl_elem_info(), which snd_ctl_elem_read() calls under CONFIG_SND_CTL_DEBUG; without that option snd_ctl_skip_validation() is a compile-time true. __snd_ctl_add_replace() validates kcontrol->count and never inspects elem->channels. Installing an oversized map needs CAP_SYS_RAWIO, but the control outlives the hwdep descriptor that created it, so the out-of-bounds stores are issued by any process able to read controls on /dev/snd/controlC0. KASAN on 7.2.0-rc5 (arm64), triggered by an unprivileged control read: BUG: KASAN: slab-out-of-bounds in fcp_meter_ctl_get Write of size 8 at addr ffff000017af04c8 by task fcp_trigger/185 __asan_store8 fcp_meter_ctl_get snd_ctl_elem_read snd_ctl_ioctl Allocated by task 185: memdup_user snd_ctl_ioctl The buggy address is located 0 bytes to the right of allocated 1224-byte region [ffff000017af0000, ffff000017af04c8) Bound the map size by the ABI limit rather than by 255, and bound the store loop at the sink so it cannot run past the value array whatever elem->channels holds. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||