Filtered by vendor Linux
Subscriptions
Total
18623 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54078 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: max9286: Free control handler The control handler is leaked in some probe-time error paths, as well as in the remove path. Fix it. | ||||
| CVE-2023-54079 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq27xxx: Fix poll_interval handling and races on remove Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0 to avoid bq27xxx_battery_update() requeuing the delayed_work item. There are 2 problems with this: 1. If the driver is unbound through sysfs, rather then the module being rmmod-ed, this changes poll_interval unexpectedly 2. This is racy, after it being set poll_interval could be changed before bq27xxx_battery_update() checks it through /sys/module/bq27xxx_battery/parameters/poll_interval Fix this by added a removed attribute to struct bq27xxx_device_info and using that instead of setting poll_interval to 0. There also is another poll_interval related race on remove(), writing /sys/module/bq27xxx_battery/parameters/poll_interval will requeue the delayed_work item for all devices on the bq27xxx_battery_devices list and the device being removed was only removed from that list after cancelling the delayed_work item. Fix this by moving the removal from the bq27xxx_battery_devices list to before cancelling the delayed_work item. | ||||
| CVE-2023-54085 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix NULL pointer dereference on fastopen early fallback In case of early fallback to TCP, subflow_syn_recv_sock() deletes the subflow context before returning the newly allocated sock to the caller. The fastopen path does not cope with the above unconditionally dereferencing the subflow context. | ||||
| CVE-2023-54090 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: Fix panic during XDP_TX with > 64 CPUs Commit 4fe815850bdc ("ixgbe: let the xdpdrv work with more than 64 cpus") adds support to allow XDP programs to run on systems with more than 64 CPUs by locking the XDP TX rings and indexing them using cpu % 64 (IXGBE_MAX_XDP_QS). Upon trying this out patch on a system with more than 64 cores, the kernel paniced with an array-index-out-of-bounds at the return in ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example splat: ========================================================================== UBSAN: array-index-out-of-bounds in /var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26 index 65 is out of range for type 'ixgbe_ring *[64]' ========================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 65 PID: 408 Comm: ksoftirqd/65 Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020 RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe] Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9 00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7 47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0 RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282 RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000 RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000 RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001 R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000 R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ixgbe_poll+0x103e/0x1280 [ixgbe] ? sched_clock_cpu+0x12/0xe0 __napi_poll+0x30/0x160 net_rx_action+0x11c/0x270 __do_softirq+0xda/0x2ee run_ksoftirqd+0x2f/0x50 smpboot_thread_fn+0xb7/0x150 ? sort_range+0x30/0x30 kthread+0x127/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x30 </TASK> I think this is how it happens: Upon loading the first XDP program on a system with more than 64 CPUs, ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However, immediately after this, the rings are reconfigured by ixgbe_setup_tc. ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop. ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if it is non-zero. Commenting out the decrement in ixgbe_free_q_vector stopped my system from panicing. I suspect to make the original patch work, I would need to load an XDP program and then replace it in order to get ixgbe_xdp_locking_key back above 0 since ixgbe_setup_tc is only called when transitioning between XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is incremented every time ixgbe_xdp_setup is called. Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems with more than 64 CPUs. Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied to the number of CPUs present, there is no reason to disable it upon unloading an XDP program. To avoid confusion, I have moved enabling ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path. | ||||
| CVE-2023-54010 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects ACPICA commit 0d5f467d6a0ba852ea3aad68663cbcbd43300fd4 ACPI_ALLOCATE_ZEROED may fails, object_info might be null and will cause null pointer dereference later. | ||||
| CVE-2023-54005 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix memory leak in binder_init() In binder_init(), the destruction of binder_alloc_shrinker_init() is not performed in the wrong path, which will cause memory leaks. So this commit introduces binder_alloc_shrinker_exit() and calls it in the wrong path to fix that. | ||||
| CVE-2023-54000 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix deadlock issue when externel_lb and reset are executed together When externel_lb and reset are executed together, a deadlock may occur: [ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds. [ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 3147.238999] task:kworker/u321:0 state:D stack: 0 pid: 7 ppid: 2 flags:0x00000008 [ 3147.248045] Workqueue: hclge hclge_service_task [hclge] [ 3147.253957] Call trace: [ 3147.257093] __switch_to+0x7c/0xbc [ 3147.261183] __schedule+0x338/0x6f0 [ 3147.265357] schedule+0x50/0xe0 [ 3147.269185] schedule_preempt_disabled+0x18/0x24 [ 3147.274488] __mutex_lock.constprop.0+0x1d4/0x5dc [ 3147.279880] __mutex_lock_slowpath+0x1c/0x30 [ 3147.284839] mutex_lock+0x50/0x60 [ 3147.288841] rtnl_lock+0x20/0x2c [ 3147.292759] hclge_reset_prepare+0x68/0x90 [hclge] [ 3147.298239] hclge_reset_subtask+0x88/0xe0 [hclge] [ 3147.303718] hclge_reset_service_task+0x84/0x120 [hclge] [ 3147.309718] hclge_service_task+0x2c/0x70 [hclge] [ 3147.315109] process_one_work+0x1d0/0x490 [ 3147.319805] worker_thread+0x158/0x3d0 [ 3147.324240] kthread+0x108/0x13c [ 3147.328154] ret_from_fork+0x10/0x18 In externel_lb process, the hns3 driver call napi_disable() first, then the reset happen, then the restore process of the externel_lb will fail, and will not call napi_enable(). When doing externel_lb again, napi_disable() will be double call, cause a deadlock of rtnl_lock(). This patch use the HNS3_NIC_STATE_DOWN state to protect the calling of napi_disable() and napi_enable() in externel_lb process, just as the usage in ndo_stop() and ndo_start(). | ||||
| CVE-2023-53695 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: udf: Detect system inodes linked into directory hierarchy When UDF filesystem is corrupted, hidden system inodes can be linked into directory hierarchy which is an avenue for further serious corruption of the filesystem and kernel confusion as noticed by syzbot fuzzed images. Refuse to access system inodes linked into directory hierarchy and vice versa. | ||||
| CVE-2025-40175 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: cleanup remaining SKBs in PTP flows When the driver requests Tx timestamp value, one of the first steps is to clone SKB using skb_get. It increases the reference counter for that SKB to prevent unexpected freeing by another component. However, there may be a case where the index is requested, SKB is assigned and never consumed by PTP flows - for example due to reset during running PTP apps. Add a check in release timestamping function to verify if the SKB assigned to Tx timestamp latch was freed, and release remaining SKBs. | ||||
| CVE-2023-53702 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: use vector instructions only if available for ChaCha20 Commit 349d03ffd5f6 ("crypto: s390 - add crypto library interface for ChaCha20") added a library interface to the s390 specific ChaCha20 implementation. However no check was added to verify if the required facilities are installed before branching into the assembler code. If compiled into the kernel, this will lead to the following crash, if vector instructions are not available: data exception: 0007 ilc:3 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7+ #11 Hardware name: IBM 3931 A01 704 (KVM/Linux) Krnl PSW : 0704e00180000000 000000001857277a (chacha20_vx+0x32/0x818) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000037f0000000a ffffffffffffff60 000000008184b000 0000000019f5c8e6 0000000000000109 0000037fffb13c58 0000037fffb13c78 0000000019bb1780 0000037fffb13c58 0000000019f5c8e6 000000008184b000 0000000000000109 00000000802d8000 0000000000000109 0000000018571ebc 0000037fffb13718 Krnl Code: 000000001857276a: c07000b1f80b larl %r7,0000000019bb1780 0000000018572770: a708000a lhi %r0,10 #0000000018572774: e78950000c36 vlm %v24,%v25,0(%r5),0 >000000001857277a: e7a060000806 vl %v26,0(%r6),0 0000000018572780: e7bf70004c36 vlm %v27,%v31,0(%r7),4 0000000018572786: e70b00000456 vlr %v0,%v27 000000001857278c: e71800000456 vlr %v1,%v24 0000000018572792: e74b00000456 vlr %v4,%v27 Call Trace: [<000000001857277a>] chacha20_vx+0x32/0x818 Last Breaking-Event-Address: [<0000000018571eb6>] chacha20_crypt_s390.constprop.0+0x6e/0xd8 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix this by adding a missing MACHINE_HAS_VX check. [agordeev@linux.ibm.com: remove duplicates in commit message] | ||||
| CVE-2025-40197 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mc: Clear minor number before put device The device minor should not be cleared after the device is released. | ||||
| CVE-2023-53703 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix for shift-out-of-bounds Shift operation of 'exp' and 'shift' variables exceeds the maximum number of shift values in the u32 range leading to UBSAN shift-out-of-bounds. ... [ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50 [ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int' [ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10 [ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023 [ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh] [ 6.120687] Call Trace: [ 6.120690] <TASK> [ 6.120694] dump_stack_lvl+0x48/0x70 [ 6.120704] dump_stack+0x10/0x20 [ 6.120707] ubsan_epilogue+0x9/0x40 [ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170 [ 6.120720] ? psi_group_change+0x25f/0x4b0 [ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh] [ 6.120739] get_input_rep+0x57/0x340 [amd_sfh] [ 6.120748] ? __schedule+0xba7/0x1b60 [ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh] [ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh] [ 6.120772] process_one_work+0x229/0x430 [ 6.120780] worker_thread+0x4a/0x3c0 [ 6.120784] ? __pfx_worker_thread+0x10/0x10 [ 6.120788] kthread+0xf7/0x130 [ 6.120792] ? __pfx_kthread+0x10/0x10 [ 6.120795] ret_from_fork+0x29/0x50 [ 6.120804] </TASK> ... Fix this by adding the condition to validate shift ranges. | ||||
| CVE-2023-53706 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/vmemmap/devdax: fix kernel crash when probing devdax devices commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory savings for compound devmaps") added support for using optimized vmmemap for devdax devices. But how vmemmap mappings are created are architecture specific. For example, powerpc with hash translation doesn't have vmemmap mappings in init_mm page table instead they are bolted table entries in the hardware page table vmemmap_populate_compound_pages() used by vmemmap optimization code is not aware of these architecture-specific mapping. Hence allow architecture to opt for this feature. I selected architectures supporting HUGETLB_PAGE_OPTIMIZE_VMEMMAP option as also supporting this feature. This patch fixes the below crash on ppc64. BUG: Unable to handle kernel data access on write at 0xc00c000100400038 Faulting instruction address: 0xc000000001269d90 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc5-150500.34-default+ #2 5c90a668b6bbd142599890245c2fb5de19d7d28a Hardware name: IBM,9009-42G POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.40 (VL950_099) hv:phyp pSeries NIP: c000000001269d90 LR: c0000000004c57d4 CTR: 0000000000000000 REGS: c000000003632c30 TRAP: 0300 Not tainted (6.3.0-rc5-150500.34-default+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24842228 XER: 00000000 CFAR: c0000000004c57d0 DAR: c00c000100400038 DSISR: 42000000 IRQMASK: 0 .... NIP [c000000001269d90] __init_single_page.isra.74+0x14/0x4c LR [c0000000004c57d4] __init_zone_device_page+0x44/0xd0 Call Trace: [c000000003632ed0] [c000000003632f60] 0xc000000003632f60 (unreliable) [c000000003632f10] [c0000000004c5ca0] memmap_init_zone_device+0x170/0x250 [c000000003632fe0] [c0000000005575f8] memremap_pages+0x2c8/0x7f0 [c0000000036330c0] [c000000000557b5c] devm_memremap_pages+0x3c/0xa0 [c000000003633100] [c000000000d458a8] dev_dax_probe+0x108/0x3e0 [c0000000036331a0] [c000000000d41430] dax_bus_probe+0xb0/0x140 [c0000000036331d0] [c000000000cef27c] really_probe+0x19c/0x520 [c000000003633260] [c000000000cef6b4] __driver_probe_device+0xb4/0x230 [c0000000036332e0] [c000000000cef888] driver_probe_device+0x58/0x120 [c000000003633320] [c000000000cefa6c] __device_attach_driver+0x11c/0x1e0 [c0000000036333a0] [c000000000cebc58] bus_for_each_drv+0xa8/0x130 [c000000003633400] [c000000000ceefcc] __device_attach+0x15c/0x250 [c0000000036334a0] [c000000000ced458] bus_probe_device+0x108/0x110 [c0000000036334f0] [c000000000ce92dc] device_add+0x7fc/0xa10 [c0000000036335b0] [c000000000d447c8] devm_create_dev_dax+0x1d8/0x530 [c000000003633640] [c000000000d46b60] __dax_pmem_probe+0x200/0x270 [c0000000036337b0] [c000000000d46bf0] dax_pmem_probe+0x20/0x70 [c0000000036337d0] [c000000000d2279c] nvdimm_bus_probe+0xac/0x2b0 [c000000003633860] [c000000000cef27c] really_probe+0x19c/0x520 [c0000000036338f0] [c000000000cef6b4] __driver_probe_device+0xb4/0x230 [c000000003633970] [c000000000cef888] driver_probe_device+0x58/0x120 [c0000000036339b0] [c000000000cefd08] __driver_attach+0x1d8/0x240 [c000000003633a30] [c000000000cebb04] bus_for_each_dev+0xb4/0x130 [c000000003633a90] [c000000000cee564] driver_attach+0x34/0x50 [c000000003633ab0] [c000000000ced878] bus_add_driver+0x218/0x300 [c000000003633b40] [c000000000cf1144] driver_register+0xa4/0x1b0 [c000000003633bb0] [c000000000d21a0c] __nd_driver_register+0x5c/0x100 [c000000003633c10] [c00000000206a2e8] dax_pmem_init+0x34/0x48 [c000000003633c30] [c0000000000132d0] do_one_initcall+0x60/0x320 [c000000003633d00] [c0000000020051b0] kernel_init_freeable+0x360/0x400 [c000000003633de0] [c000000000013764] kernel_init+0x34/0x1d0 [c000000003633e50] [c00000000000de14] ret_from_kernel_thread+0x5c/0x64 | ||||
| CVE-2023-53708 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE` objects while evaluating the AMD LPS0 _DSM, there will be a memory leak. Explicitly guard against this. | ||||
| CVE-2023-53710 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read Kernel NULL pointer dereference when ACPI SAR table isn't implemented well. Fix the error code of return to mark the ACPI SAR table as invalid. [ 5.077128] mt7921e 0000:06:00.0: sar cnt = 0 [ 5.077381] BUG: kernel NULL pointer dereference, address: 0000000000000004 [ 5.077630] #PF: supervisor read access in kernel mode [ 5.077883] #PF: error_code(0x0000) - not-present page [ 5.078138] PGD 0 P4D 0 [ 5.078398] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5.079202] RIP: 0010:mt7921_init_acpi_sar+0x106/0x220 [mt7921_common] ... [ 5.080786] Call Trace: [ 5.080786] <TASK> [ 5.080786] mt7921_register_device+0x37d/0x490 [mt7921_common] [ 5.080786] mt7921_pci_probe.part.0+0x2ee/0x310 [mt7921e] [ 5.080786] mt7921_pci_probe+0x52/0x70 [mt7921e] [ 5.080786] local_pci_probe+0x47/0x90 [ 5.080786] pci_call_probe+0x55/0x190 [ 5.080786] pci_device_probe+0x84/0x120 | ||||
| CVE-2023-53715 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex Apparently the hex passphrase mechanism does not work on newer chips/firmware (e.g. BCM4387). It seems there was a simple way of passing it in binary all along, so use that and avoid the hexification. OpenBSD has been doing it like this from the beginning, so this should work on all chips. Also clear the structure before setting the PMK. This was leaking uninitialized stack contents to the device. | ||||
| CVE-2023-53716 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fix skb leak in __skb_tstamp_tx() Commit 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with zerocopy skbs. But it ended up adding a leak of its own. When skb_orphan_frags_rx() fails, the function just returns, leaking the skb it just cloned. Free it before returning. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. | ||||
| CVE-2023-53723 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini, driver unconditionally disables ecc_irq which is only enabled on those asics enabling sdma ecc. This will introduce a warning in suspend cycle on those chips with sdma ip v4.0, while without sdma ecc. So this patch correct this. [ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246 [ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000 [ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000 [ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006 [ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390 [ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105 [ 7283.167032] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.167036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.167041] Call Trace: [ 7283.167046] <TASK> [ 7283.167048] sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu] [ 7283.167704] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.168296] amdgpu_device_suspend+0x103/0x180 [amdgpu] [ 7283.168875] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.169464] pci_pm_freeze+0x54/0xc0 | ||||
| CVE-2023-53725 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe Smatch reports: drivers/clocksource/timer-cadence-ttc.c:529 ttc_timer_probe() warn: 'timer_baseaddr' from of_iomap() not released on lines: 498,508,516. timer_baseaddr may have the problem of not being released after use, I replaced it with the devm_of_iomap() function and added the clk_put() function to cleanup the "clk_ce" and "clk_cs". | ||||
| CVE-2023-53727 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: avoid stalls in fq_pie_timer() When setting a high number of flows (limit being 65536), fq_pie_timer() is currently using too much time as syzbot reported. Add logic to yield the cpu every 2048 flows (less than 150 usec on debug kernels). It should also help by not blocking qdisc fast paths for too long. Worst case (65536 flows) would need 31 jiffies for a complete scan. Relevant extract from syzbot report: rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 0-.... } 2663 jiffies s: 873 root: 0x1/. rcu: blocking rcu_node structures (internal RCU debug): Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 5177 Comm: syz-executor273 Not tainted 6.5.0-syzkaller-00453-g727dbda16b83 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline] RIP: 0010:write_comp_data+0x21/0x90 kernel/kcov.c:236 Code: 2e 0f 1f 84 00 00 00 00 00 65 8b 05 01 b2 7d 7e 49 89 f1 89 c6 49 89 d2 81 e6 00 01 00 00 49 89 f8 65 48 8b 14 25 80 b9 03 00 <a9> 00 01 ff 00 74 0e 85 f6 74 59 8b 82 04 16 00 00 85 c0 74 4f 8b RSP: 0018:ffffc90000007bb8 EFLAGS: 00000206 RAX: 0000000000000101 RBX: ffffc9000dc0d140 RCX: ffffffff885893b0 RDX: ffff88807c075940 RSI: 0000000000000100 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc9000dc0d178 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000555555d54380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6b442f6130 CR3: 000000006fe1c000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <IRQ> pie_calculate_probability+0x480/0x850 net/sched/sch_pie.c:415 fq_pie_timer+0x1da/0x4f0 net/sched/sch_fq_pie.c:387 call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700 | ||||