Filtered by vendor Redhat
Subscriptions
Filtered by product Openshift
Subscriptions
Total
1301 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-1272 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-04-15 | 7.7 High |
| The Linux Kernel lockdown mode for kernel versions starting on 6.12 and above for Fedora Linux has the lockdown mode disabled without any warning. This may allow an attacker to gain access to sensitive information such kernel memory mappings, I/O ports, BPF and kprobes. Additionally unsigned modules can be loaded, leading to execution of untrusted code breaking breaking any Secure Boot protection. This vulnerability affects only Fedora Linux. | ||||
| CVE-2024-11614 | 1 Redhat | 6 Enterprise Linux, Openshift, Rhel Aus and 3 more | 2026-04-15 | N/A |
| An out-of-bounds read vulnerability was found in DPDK's Vhost library checksum offload feature. This issue enables an untrusted or compromised guest to crash the hypervisor's vSwitch by forging Virtio descriptors to cause out-of-bounds reads. This flaw allows an attacker with a malicious VM using a virtio driver to cause the vhost-user side to crash by sending a packet with a Tx checksum offload request and an invalid csum_start offset. | ||||
| CVE-2024-1737 | 2 Isc, Redhat | 8 Bind, Enterprise Linux, Openshift and 5 more | 2026-04-15 | 7.5 High |
| Resolver caches and authoritative zone databases that hold significant numbers of RRs for the same hostname (of any RTYPE) can suffer from degraded performance as content is being added or updated, and also when handling client queries for this name. This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.4-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1. | ||||
| CVE-2024-24785 | 1 Redhat | 18 Ceph Storage, Enterprise Linux, Kube Descheduler Operator and 15 more | 2026-04-15 | 5.4 Medium |
| If errors returned from MarshalJSON methods contain user controlled data, they may be used to break the contextual auto-escaping behavior of the html/template package, allowing for subsequent actions to inject unexpected content into templates. | ||||
| CVE-2024-24968 | 1 Redhat | 1 Openshift | 2026-04-15 | 5.3 Medium |
| Improper finite state machines (FSMs) in hardware logic in some Intel(R) Processors may allow an privileged user to potentially enable a denial of service via local access. | ||||
| CVE-2024-2905 | 1 Redhat | 3 Enterprise Linux, Openshift, Rhel Eus | 2026-04-15 | 6.2 Medium |
| A security vulnerability has been discovered within rpm-ostree, pertaining to the /etc/shadow file in default builds having the world-readable bit enabled. This issue arises from the default permissions being set at a higher level than recommended, potentially exposing sensitive authentication data to unauthorized access. | ||||
| CVE-2024-43168 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2026-04-15 | 4.8 Medium |
| DISPUTE NOTE: this issue does not pose a security risk as it (according to analysis by the original software developer, NLnet Labs) falls within the expected functionality and security controls of the application. Red Hat has made a claim that there is a security risk within Red Hat products. NLnet Labs has no further information about the claim, and suggests that affected Red Hat customers refer to available Red Hat documentation or support channels. ORIGINAL DESCRIPTION: A heap-buffer-overflow flaw was found in the cfg_mark_ports function within Unbound's config_file.c, which can lead to memory corruption. This issue could allow an attacker with local access to provide specially crafted input, potentially causing the application to crash or allowing arbitrary code execution. This could result in a denial of service or unauthorized actions on the system. | ||||
| CVE-2023-45288 | 3 Go Standard Library, Golang, Redhat | 33 Net\/http, Http2, Acm and 30 more | 2026-04-15 | 7.5 High |
| An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames. Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a request's headers exceed MaxHeaderBytes, no memory is allocated to store the excess headers, but they are still parsed. This permits an attacker to cause an HTTP/2 endpoint to read arbitrary amounts of header data, all associated with a request which is going to be rejected. These headers can include Huffman-encoded data which is significantly more expensive for the receiver to decode than for an attacker to send. The fix sets a limit on the amount of excess header frames we will process before closing a connection. | ||||
| CVE-2024-45337 | 1 Redhat | 15 Acm, Advanced Cluster Security, Cert Manager and 12 more | 2026-04-15 | 9.1 Critical |
| Applications and libraries which misuse connection.serverAuthenticate (via callback field ServerConfig.PublicKeyCallback) may be susceptible to an authorization bypass. The documentation for ServerConfig.PublicKeyCallback says that "A call to this function does not guarantee that the key offered is in fact used to authenticate." Specifically, the SSH protocol allows clients to inquire about whether a public key is acceptable before proving control of the corresponding private key. PublicKeyCallback may be called with multiple keys, and the order in which the keys were provided cannot be used to infer which key the client successfully authenticated with, if any. Some applications, which store the key(s) passed to PublicKeyCallback (or derived information) and make security relevant determinations based on it once the connection is established, may make incorrect assumptions. For example, an attacker may send public keys A and B, and then authenticate with A. PublicKeyCallback would be called only twice, first with A and then with B. A vulnerable application may then make authorization decisions based on key B for which the attacker does not actually control the private key. Since this API is widely misused, as a partial mitigation golang.org/x/cry...@v0.31.0 enforces the property that, when successfully authenticating via public key, the last key passed to ServerConfig.PublicKeyCallback will be the key used to authenticate the connection. PublicKeyCallback will now be called multiple times with the same key, if necessary. Note that the client may still not control the last key passed to PublicKeyCallback if the connection is then authenticated with a different method, such as PasswordCallback, KeyboardInteractiveCallback, or NoClientAuth. Users should be using the Extensions field of the Permissions return value from the various authentication callbacks to record data associated with the authentication attempt instead of referencing external state. Once the connection is established the state corresponding to the successful authentication attempt can be retrieved via the ServerConn.Permissions field. Note that some third-party libraries misuse the Permissions type by sharing it across authentication attempts; users of third-party libraries should refer to the relevant projects for guidance. | ||||
| CVE-2025-8860 | 1 Redhat | 3 Advanced Virtualization, Enterprise Linux, Openshift | 2026-04-15 | 3.3 Low |
| A flaw was found in QEMU in the uefi-vars virtual device. When the guest writes to register UEFI_VARS_REG_BUFFER_SIZE, the .write callback `uefi_vars_write` is invoked. The function allocates a heap buffer without zeroing the memory, leaving the buffer filled with residual data from prior allocations. When the guest later reads from register UEFI_VARS_REG_PIO_BUFFER_TRANSFER, the .read callback `uefi_vars_read` returns leftover metadata or other sensitive process memory from the previously allocated buffer, leading to an information disclosure vulnerability. | ||||
| CVE-2023-6596 | 1 Redhat | 1 Openshift | 2026-04-15 | 7.5 High |
| An incomplete fix was shipped for the Rapid Reset (CVE-2023-44487/CVE-2023-39325) vulnerability for an OpenShift Containers. | ||||
| CVE-2024-6409 | 1 Redhat | 4 Enterprise Linux, Openshift, Rhel E4s and 1 more | 2026-04-15 | 7 High |
| A race condition vulnerability was discovered in how signals are handled by OpenSSH's server (sshd). If a remote attacker does not authenticate within a set time period, then sshd's SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server. | ||||
| CVE-2023-45290 | 1 Redhat | 20 Advanced Cluster Security, Ansible Automation Platform, Ceph Storage and 17 more | 2026-04-15 | 6.5 Medium |
| When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines. | ||||
| CVE-2025-14443 | 1 Redhat | 1 Openshift | 2026-04-15 | 6.4 Medium |
| A flaw was found in ose-openshift-apiserver. This vulnerability allows internal network enumeration, service discovery, limited information disclosure, and potential denial-of-service (DoS) through Server-Side Request Forgery (SSRF) due to missing IP address and network-range validation when processing user-supplied image references. | ||||
| CVE-2024-11217 | 1 Redhat | 1 Openshift | 2026-04-15 | 4.9 Medium |
| A vulnerability was found in the OAuth-server. OAuth-server logs the OAuth2 client secret when the logLevel is Debug higher for OIDC/GitHub/GitLab/Google IDPs login options. | ||||
| CVE-2024-24788 | 1 Redhat | 15 Ansible Automation Platform, Ceph Storage, Cost Management and 12 more | 2026-04-15 | 5.9 Medium |
| A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop. | ||||
| CVE-2025-14876 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-04-15 | 5.5 Medium |
| A flaw was found in the virtio-crypto device of QEMU. A malicious guest operating system can exploit a missing length limit in the AKCIPHER path, leading to uncontrolled memory allocation. This can result in a denial of service (DoS) on the host system by causing the QEMU process to terminate unexpectedly. | ||||
| CVE-2025-29781 | 1 Redhat | 1 Openshift | 2026-04-15 | 6.5 Medium |
| The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. Baremetal Operator enables users to load Secret from arbitrary namespaces upon deployment of the namespace scoped Custom Resource `BMCEventSubscription`. Prior to versions 0.8.1 and 0.9.1, an adversary Kubernetes account with only namespace level roles (e.g. a tenant controlling a namespace) may create a `BMCEventSubscription` in his authorized namespace and then load Secrets from his unauthorized namespaces to his authorized namespace via the Baremetal Operator, causing Secret Leakage. The patch makes BMO refuse to read Secrets from other namespace than where the corresponding BMH resource is. The patch does not change the `BMCEventSubscription` API in BMO, but stricter validation will fail the request at admission time. It will also prevent the controller reading such Secrets, in case the BMCES CR has already been deployed. The issue exists for all versions of BMO, and is patched in BMO releases v0.9.1 and v0.8.1. Prior upgrading to patched BMO version, duplicate any existing Secret pointed to by `BMCEventSubscription`'s `httpHeadersRef` to the same namespace where the corresponding BMH exists. After upgrade, remove the old Secrets. As a workaround, the operator can configure BMO RBAC to be namespace scoped, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces, and/or use `WATCH_NAMESPACE` configuration option to limit BMO to single namespace. | ||||
| CVE-2024-6538 | 1 Redhat | 1 Openshift | 2026-04-15 | 5.3 Medium |
| A flaw was found in OpenShift Console. A Server Side Request Forgery (SSRF) attack can happen if an attacker supplies all or part of a URL to the server to query. The server is considered to be in a privileged network position and can often reach exposed services that aren't readily available to clients due to network filtering. Leveraging such an attack vector, the attacker can have an impact on other services and potentially disclose information or have other nefarious effects on the system. The /api/dev-console/proxy/internet endpoint on the OpenShift Console allows authenticated users to have the console's pod perform arbitrary and fully controlled HTTP(s) requests. The full response to these requests is returned by the endpoint. While the name of this endpoint suggests the requests are only bound to the internet, no such checks are in place. An authenticated user can therefore ask the console to perform arbitrary HTTP requests from outside the cluster to a service inside the cluster. | ||||
| CVE-2025-5791 | 1 Redhat | 4 Confidential Compute Attestation, Enterprise Linux, Openshift and 1 more | 2026-04-15 | 7.1 High |
| A flaw was found in the user's crate for Rust. This vulnerability allows privilege escalation via incorrect group listing when a user or process has fewer than exactly 1024 groups, leading to the erroneous inclusion of the root group in the access list. | ||||