Filtered by vendor Linux
Subscriptions
Total
18625 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68804 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_ishtp: Fix UAF after unbinding driver After unbinding the driver, another kthread `cros_ec_console_log_work` is still accessing the device, resulting an UAF and crash. The driver doesn't unregister the EC device in .remove() which should shutdown sub-devices synchronously. Fix it. | ||||
| CVE-2025-68822 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: alps - fix use-after-free bugs caused by dev3_register_work The dev3_register_work delayed work item is initialized within alps_reconnect() and scheduled upon receipt of the first bare PS/2 packet from an external PS/2 device connected to the ALPS touchpad. During device detachment, the original implementation calls flush_workqueue() in psmouse_disconnect() to ensure completion of dev3_register_work. However, the flush_workqueue() in psmouse_disconnect() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after flush_workqueue() has finished executing, the dev3_register_work could still be scheduled. Although the psmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(), the scheduling of dev3_register_work remains unaffected. The race condition can occur as follows: CPU 0 (cleanup path) | CPU 1 (delayed work) psmouse_disconnect() | psmouse_set_state() | flush_workqueue() | alps_report_bare_ps2_packet() alps_disconnect() | psmouse_queue_work() kfree(priv); // FREE | alps_register_bare_ps2_mouse() | priv = container_of(work...); // USE | priv->dev3 // USE Add disable_delayed_work_sync() in alps_disconnect() to ensure that dev3_register_work is properly canceled and prevented from executing after the alps_data structure has been deallocated. This bug is identified by static analysis. | ||||
| CVE-2025-39991 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load() If ab->fw.m3_data points to data, then fw pointer remains null. Further, if m3_mem is not allocated, then fw is dereferenced to be passed to ath11k_err function. Replace fw->size by m3_len. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-40001 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work item completes before the mvs_info is deallocated. This bug was found by static analysis. | ||||
| CVE-2025-40006 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix folio is still mapped when deleted Migration may be raced with fallocating hole. remove_inode_single_folio will unmap the folio if the folio is still mapped. However, it's called without folio lock. If the folio is migrated and the mapped pte has been converted to migration entry, folio_mapped() returns false, and won't unmap it. Due to extra refcount held by remove_inode_single_folio, migration fails, restores migration entry to normal pte, and the folio is mapped again. As a result, we triggered BUG in filemap_unaccount_folio. The log is as follows: BUG: Bad page cache in process hugetlb pfn:156c00 page: refcount:515 mapcount:0 mapping:0000000099fef6e1 index:0x0 pfn:0x156c00 head: order:9 mapcount:1 entire_mapcount:1 nr_pages_mapped:0 pincount:0 aops:hugetlbfs_aops ino:dcc dentry name(?):"my_hugepage_file" flags: 0x17ffffc00000c1(locked|waiters|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: f4(hugetlb) page dumped because: still mapped when deleted CPU: 1 UID: 0 PID: 395 Comm: hugetlb Not tainted 6.17.0-rc5-00044-g7aac71907bde-dirty #484 NONE Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x4f/0x70 filemap_unaccount_folio+0xc4/0x1c0 __filemap_remove_folio+0x38/0x1c0 filemap_remove_folio+0x41/0xd0 remove_inode_hugepages+0x142/0x250 hugetlbfs_fallocate+0x471/0x5a0 vfs_fallocate+0x149/0x380 Hold folio lock before checking if the folio is mapped to avold race with migration. | ||||
| CVE-2025-40010 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix potential null pointer dereference in afs_put_server afs_put_server() accessed server->debug_id before the NULL check, which could lead to a null pointer dereference. Move the debug_id assignment, ensuring we never dereference a NULL server pointer. | ||||
| CVE-2025-40031 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tee: fix register_shm_helper() In register_shm_helper(), fix incorrect error handling for a call to iov_iter_extract_pages(). A case is missing for when iov_iter_extract_pages() only got some pages and return a number larger than 0, but not the requested amount. This fixes a possible NULL pointer dereference following a bad input from ioctl(TEE_IOC_SHM_REGISTER) where parts of the buffer isn't mapped. | ||||
| CVE-2025-40033 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable() pru_rproc_set_ctable() accessed rproc->priv before the IS_ERR_OR_NULL check, which could lead to a null pointer dereference. Move the pru assignment, ensuring we never dereference a NULL rproc pointer. | ||||
| CVE-2025-40035 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak Struct ff_effect_compat is embedded twice inside uinput_ff_upload_compat, contains internal padding. In particular, there is a hole after struct ff_replay to satisfy alignment requirements for the following union member. Without clearing the structure, copy_to_user() may leak stack data to userspace. Initialize ff_up_compat to zero before filling valid fields. | ||||
| CVE-2025-40036 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix possible map leak in fastrpc_put_args copy_to_user() failure would cause an early return without cleaning up the fdlist, which has been updated by the DSP. This could lead to map leak. Fix this by redirecting to a cleanup path on failure, ensuring that all mapped buffers are properly released before returning. | ||||
| CVE-2025-40043 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: nfc: nci: Add parameter validation for packet data Syzbot reported an uninitialized value bug in nci_init_req, which was introduced by commit 5aca7966d2a7 ("Merge tag 'perf-tools-fixes-for-v6.17-2025-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools"). This bug arises due to very limited and poor input validation that was done at nic_valid_size(). This validation only validates the skb->len (directly reflects size provided at the userspace interface) with the length provided in the buffer itself (interpreted as NCI_HEADER). This leads to the processing of memory content at the address assuming the correct layout per what opcode requires there. This leads to the accesses to buffer of `skb_buff->data` which is not assigned anything yet. Following the same silent drop of packets of invalid sizes at `nic_valid_size()`, add validation of the data in the respective handlers and return error values in case of failure. Release the skb if error values are returned from handlers in `nci_nft_packet` and effectively do a silent drop Possible TODO: because we silently drop the packets, the call to `nci_request` will be waiting for completion of request and will face timeouts. These timeouts can get excessively logged in the dmesg. A proper handling of them may require to export `nci_request_cancel` (or propagate error handling from the nft packets handlers). | ||||
| CVE-2025-40057 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ptp: Add a upper bound on max_vclocks syzbot reported WARNING in max_vclocks_store. This occurs when the argument max is too large for kcalloc to handle. Extend the guard to guard against values that are too large for kcalloc | ||||
| CVE-2025-40058 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Disallow dirty tracking if incoherent page walk Dirty page tracking relies on the IOMMU atomically updating the dirty bit in the paging-structure entry. For this operation to succeed, the paging- structure memory must be coherent between the IOMMU and the CPU. In another word, if the iommu page walk is incoherent, dirty page tracking doesn't work. The Intel VT-d specification, Section 3.10 "Snoop Behavior" states: "Remapping hardware encountering the need to atomically update A/EA/D bits in a paging-structure entry that is not snooped will result in a non- recoverable fault." To prevent an IOMMU from being incorrectly configured for dirty page tracking when it is operating in an incoherent mode, mark SSADS as supported only when both ecap_slads and ecap_smpwc are supported. | ||||
| CVE-2025-40059 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: Fix incorrect handling for return value of devm_kzalloc The return value of devm_kzalloc could be an null pointer, use "!desc.pdata" to fix incorrect handling return value of devm_kzalloc. | ||||
| CVE-2025-40062 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs When the initialization of qm->debug.acc_diff_reg fails, the probe process does not exit. However, after qm->debug.qm_diff_regs is freed, it is not set to NULL. This can lead to a double free when the remove process attempts to free it again. Therefore, qm->debug.qm_diff_regs should be set to NULL after it is freed. | ||||
| CVE-2025-40070 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pps: fix warning in pps_register_cdev when register device fail Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error handling in __video_register_device()"), the release hook should be set before device_register(). Otherwise, when device_register() return error and put_device() try to callback the release function, the below warning may happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567 Modules linked in: CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567 Call Trace: <TASK> kobject_cleanup+0x136/0x410 lib/kobject.c:689 kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0xe9/0x130 lib/kobject.c:737 put_device+0x24/0x30 drivers/base/core.c:3797 pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402 pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108 pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57 tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432 tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563 tiocsetd drivers/tty/tty_io.c:2429 [inline] tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:598 [inline] __se_sys_ioctl fs/ioctl.c:584 [inline] __x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Before commit c79a39dc8d06 ("pps: Fix a use-after-free"), pps_register_cdev() call device_create() to create pps->dev, which will init dev->release to device_create_release(). Now the comment is outdated, just remove it. Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed in pps_register_source() to avoid a double free in the failure case. | ||||
| CVE-2025-40078 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Explicitly check accesses to bpf_sock_addr Syzkaller found a kernel warning on the following sock_addr program: 0: r0 = 0 1: r2 = *(u32 *)(r1 +60) 2: exit which triggers: verifier bug: error during ctx access conversion (0) This is happening because offset 60 in bpf_sock_addr corresponds to an implicit padding of 4 bytes, right after msg_src_ip4. Access to this padding isn't rejected in sock_addr_is_valid_access and it thus later fails to convert the access. This patch fixes it by explicitly checking the various fields of bpf_sock_addr in sock_addr_is_valid_access. I checked the other ctx structures and is_valid_access functions and didn't find any other similar cases. Other cases of (properly handled) padding are covered in new tests in a subsequent patch. | ||||
| CVE-2025-40093 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ecm: Refactor bind path to use __free() After an bind/unbind cycle, the ecm->notify_req is left stale. If a subsequent bind fails, the unified error label attempts to free this stale request, leading to a NULL pointer dereference when accessing ep->ops->free_request. Refactor the error handling in the bind path to use the __free() automatic cleanup mechanism. | ||||
| CVE-2025-40099 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: parse_dfs_referrals: prevent oob on malformed input Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS - reply smaller than sizeof(struct get_dfs_referral_rsp) - reply with number of referrals smaller than NumberOfReferrals in the header Processing of such replies will cause oob. Return -EINVAL error on such replies to prevent oob-s. | ||||
| CVE-2025-40100 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not assert we found block group item when creating free space tree Currently, when building a free space tree at populate_free_space_tree(), if we are not using the block group tree feature, we always expect to find block group items (either extent items or a block group item with key type BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with btrfs_search_slot_for_read(), so we assert that we found an item. However this expectation is wrong since we can have a new block group created in the current transaction which is still empty and for which we still have not added the block group's item to the extent tree, in which case we do not have any items in the extent tree associated to the block group. The insertion of a new block group's block group item in the extent tree happens at btrfs_create_pending_block_groups() when it calls the helper insert_block_group_item(). This typically is done when a transaction handle is released, committed or when running delayed refs (either as part of a transaction commit or when serving tickets for space reservation if we are low on free space). So remove the assertion at populate_free_space_tree() even when the block group tree feature is not enabled and update the comment to mention this case. Syzbot reported this with the following stack trace: BTRFS info (device loop3 state M): rebuilding free space tree assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1115! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115 Code: ff ff e8 d3 (...) RSP: 0018:ffffc9000430f780 EFLAGS: 00010246 RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94 R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001 R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0 Call Trace: <TASK> btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364 btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062 btrfs_remount_rw fs/btrfs/super.c:1334 [inline] btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559 reconfigure_super+0x227/0x890 fs/super.c:1076 do_remount fs/namespace.c:3279 [inline] path_mount+0xd1a/0xfe0 fs/namespace.c:4027 do_mount fs/namespace.c:4048 [inline] __do_sys_mount fs/namespace.c:4236 [inline] __se_sys_mount+0x313/0x410 fs/namespace.c:4213 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f424e39066a Code: d8 64 89 02 (...) RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000 RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020 R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380 R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- | ||||