Total
6226 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64373 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: Fix hotplug-suspend race during reboot During system reboot, cpufreq_suspend() is called via the kernel_restart() -> device_shutdown() path. Unlike the normal system suspend path, the reboot path does not call freeze_processes(), so userspace processes and kernel threads remain active. This allows CPU hotplug operations to run concurrently with cpufreq_suspend(). The original code has no synchronization with CPU hotplug, leading to a race condition where governor_data can be freed by the hotplug path while cpufreq_suspend() is still accessing it, resulting in a null pointer dereference: Unable to handle kernel NULL pointer dereference Call Trace: do_kernel_fault+0x28/0x3c cpufreq_suspend+0xdc/0x160 device_shutdown+0x18/0x200 kernel_restart+0x40/0x80 arm64_sys_reboot+0x1b0/0x200 Fix this by adding cpus_read_lock()/cpus_read_unlock() to cpufreq_suspend() to block CPU hotplug operations while suspend is in progress. [ rjw: Changelog edits ] | ||||
| CVE-2023-54354 | 1 Nokogiri | 1 Nokogiri | 2026-09-08 | 7.5 High |
| This CVE ID has been rejected as a duplicate. | ||||
| CVE-2026-86097 | 1 Px4 | 1 Autopilot | 2026-09-08 | 6.5 Medium |
| PX4 Autopilot through 1.17.0 contains a null pointer dereference vulnerability in param_set_default_file() and param_set_backup_file() functions that allows attackers to crash the autopilot process. Attackers can invoke 'param select' or 'param select-backup' commands with no path argument from any PX4 shell to trigger the crash. | ||||
| CVE-2026-64545 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net, bpf: check master for NULL in xdp_master_redirect() xdp_master_redirect() dereferences the result of netdev_master_upper_dev_get_rcu() without a NULL check, but that helper returns NULL when the receiving device has no upper-master adjacency. The reach guard only checks netif_is_bond_slave(). On bond slave release bond_upper_dev_unlink() drops the upper-master adjacency before clearing IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window still passes netif_is_bond_slave() while master is already NULL, and faults on master->flags at offset 0xb0: BUG: kernel NULL pointer dereference, address: 00000000000000b0 RIP: 0010:xdp_master_redirect (net/core/filter.c:4432) Call Trace: xdp_master_redirect (net/core/filter.c:4432) bpf_prog_run_generic_xdp (include/net/xdp.h:700) do_xdp_generic (net/core/dev.c:5608) __netif_receive_skb_one_core (net/core/dev.c:6204) process_backlog (net/core/dev.c:6319) __napi_poll (net/core/dev.c:7729) net_rx_action (net/core/dev.c:7792) handle_softirqs (kernel/softirq.c:622) __dev_queue_xmit (include/linux/bottom_half.h:33) packet_sendmsg (net/packet/af_packet.c:3082) __sys_sendto (net/socket.c:2252) Kernel panic - not syncing: Fatal exception in interrupt The missing check dates back to the original code; commit 1921f91298d1 ("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master") later added the master->flags read where the fault now lands but kept the unconditional deref. Check master for NULL before use; a NULL master is treated the same as one that is not up. | ||||
| CVE-2026-64538 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix null-ptr-deref in fib6_nh_mtu_change(). fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown() clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(), but this re-fetch is unguarded; nexthop-backed routes survive addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is nulled. Return 0 when idev is NULL, matching rt6_mtu_change_route() and the fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in fib6_mtu()."). Oops: general protection fault, ... KASAN: null-ptr-deref in range [0x00000000000002a8-0x00000000000002af] RIP: 0010:fib6_nh_mtu_change+0x203/0x990 rt6_mtu_change_route+0x141/0x1d0 __fib6_clean_all+0xd0/0x160 rt6_mtu_change+0xb4/0x100 ndisc_router_discovery+0x24b5/0x2cb0 icmpv6_rcv+0x12e9/0x1710 ipv6_rcv+0x39b/0x410 | ||||
| CVE-2026-63810 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Avoid mounting the bdev pseudo-filesystem in userspace The bdev pseudo-filesystem is an internal kernel filesystem with which userspace should not interfere. Unregister it so that userspace cannot even attempt to mount it. This fixes a bug [1] that occurs when attempting to access files, because the system call move_mount() uses pointers declared in the inode_operations structure, which for the bdev pseudo-filesystem are always equal to 0. `inode->i_op = &empty_iops;` [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 23380067 P4D 23380067 PUD 23381067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN NOPTI CPU: 2 PID: 17125 Comm: syz-executor.0 Not tainted 6.1.155-syzkaller-00350-g84221fde2681 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:0x0 Call Trace: <TASK> lookup_open.isra.0+0x700/0x1180 fs/namei.c:3460 open_last_lookups fs/namei.c:3550 [inline] path_openat+0x953/0x2700 fs/namei.c:3780 do_filp_open+0x1c5/0x410 fs/namei.c:3810 do_sys_openat2+0x171/0x4d0 fs/open.c:1318 do_sys_open fs/open.c:1334 [inline] __do_sys_openat fs/open.c:1350 [inline] __se_sys_openat fs/open.c:1345 [inline] __x64_sys_openat+0x13c/0x1f0 fs/open.c:1345 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-53012 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nexthop: fix IPv6 route referencing IPv4 nexthop syzbot reported a panic [1] [2]. When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag of all groups containing this nexthop is not updated. This is because nh_group_v4_update is only called when replacing AF_INET to AF_INET6, but the reverse direction (AF_INET6 to AF_INET) is missed. This allows a stale has_v4=false to bypass fib6_check_nexthop, causing IPv6 routes to be attached to groups that effectively contain only AF_INET members. Subsequent route lookups then call nexthop_fib6_nh() which returns NULL for the AF_INET member, leading to a NULL pointer dereference. Fix by calling nh_group_v4_update whenever the family changes, not just AF_INET to AF_INET6. Reproducer: # AF_INET6 blackhole ip -6 nexthop add id 1 blackhole # group with has_v4=false ip nexthop add id 100 group 1 # replace with AF_INET (no -6), has_v4 stays false ip nexthop replace id 1 blackhole # pass stale has_v4 check ip -6 route add 2001:db8::/64 nhid 100 # panic ping -6 2001:db8::1 [1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0 [2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3 | ||||
| CVE-2026-52998 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check The nf_osf_ttl() function accessed skb->dev to perform a local interface address lookup without verifying that the device pointer was valid. Additionally, the implementation utilized an in_dev_for_each_ifa_rcu loop to match the packet source address against local interface addresses. It assumed that packets from the same subnet should not see a decrement on the initial TTL. A packet might appear it is from the same subnet but it actually isn't especially in modern environments with containers and virtual switching. Remove the device dereference and interface loop. Replace the logic with a switch statement that evaluates the TTL according to the ttl_check. | ||||
| CVE-2026-52986 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of all simple_strtoul() usage in conntrack, prefer a stricter version instead. There are intentional changes: - Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters. - Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10. - In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range. - epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses. This is intentional. nf_conntrack_sip performs lots of guesswork to find the right parts of the message to parse. Being stricter could break existing setups. Connection tracking helpers are designed to allow traffic to pass, not to block it. Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>. | ||||
| CVE-2026-46086 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use a stable FDB dst snapshot in RCU readers Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns. | ||||
| CVE-2026-43216 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: Drop the lock in skb_may_tx_timestamp() skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must not be taken in IRQ context, only softirq is okay. A few drivers receive the timestamp via a dedicated interrupt and complete the TX timestamp from that handler. This will lead to a deadlock if the lock is already write-locked on the same CPU. Taking the lock can be avoided. The socket (pointed by the skb) will remain valid until the skb is released. The ->sk_socket and ->file member will be set to NULL once the user closes the socket which may happen before the timestamp arrives. If we happen to observe the pointer while the socket is closing but before the pointer is set to NULL then we may use it because both pointer (and the file's cred member) are RCU freed. Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a matching WRITE_ONCE() where the pointer are cleared. | ||||
| CVE-2023-53292 | 1 Linux | 1 Linux Kernel | 2026-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix NULL dereference on q->elevator in blk_mq_elv_switch_none After grabbing q->sysfs_lock, q->elevator may become NULL because of elevator switch. Fix the NULL dereference on q->elevator by checking it with lock. | ||||
| CVE-2026-53313 | 1 Linux | 1 Linux Kernel | 2026-09-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths In dc_dmub_srv_log_diagnostic_data() and dc_dmub_srv_enable_dpia_trace(). Both functions check: if (!dc_dmub_srv || !dc_dmub_srv->dmub) and then call DC_LOG_ERROR() inside that block. DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if dc_dmub_srv is NULL, the logging itself can dereference a NULL pointer and cause a crash. Fix this by splitting the checks. First check if dc_dmub_srv is NULL and return immediately. Then check dc_dmub_srv->dmub and log the error only when dc_dmub_srv is valid. Fixes the below: ../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961) ../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166) | ||||
| CVE-2025-38621 | 1 Linux | 1 Linux Kernel | 2026-09-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: make rdev_addable usable for rcu mode Our testcase trigger panic: BUG: kernel NULL pointer dereference, address: 00000000000000e0 ... Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 85 Comm: kworker/2:1 Not tainted 6.16.0+ #94 PREEMPT(none) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Workqueue: md_misc md_start_sync RIP: 0010:rdev_addable+0x4d/0xf0 ... Call Trace: <TASK> md_start_sync+0x329/0x480 process_one_work+0x226/0x6d0 worker_thread+0x19e/0x340 kthread+0x10f/0x250 ret_from_fork+0x14d/0x180 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: raid10 CR2: 00000000000000e0 ---[ end trace 0000000000000000 ]--- RIP: 0010:rdev_addable+0x4d/0xf0 md_spares_need_change in md_start_sync will call rdev_addable which protected by rcu_read_lock/rcu_read_unlock. This rcu context will help protect rdev won't be released, but rdev->mddev will be set to NULL before we call synchronize_rcu in md_kick_rdev_from_array. Fix this by using READ_ONCE and check does rdev->mddev still alive. | ||||
| CVE-2026-80726 | 1 Linux | 1 Linux Kernel | 2026-09-07 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: WARN and clear role.invalid when creating a child shadow page Explicitly clear role.invalid when deriving a child shadow page's role from its parent to harden against bugs elsewhere in KVM, as violating KVM's invariant that invalid pages are NOT on the list of active MMU pages leads to use-after-free due to __kvm_mmu_prepare_zap_page() using list_add() instead of list_move() when processing an invalid shadow page, i.e. makes a bad situation far worse. Yell loudly if the parent is invalid, as it means KVM has missed a validity check, i.e. KVM is attempting to map memory using an invalid/obsolete root, but continue on as the child is otherwise still a valid shadow page. ================================================================== BUG: KASAN: slab-use-after-free in __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] Write of size 8 at addr ff11000153dd1368 by task repro/853 CPU: 1 UID: 1000 PID: 853 Comm: repro Not tainted 7.2.0-rc2-3aec122bdcaf-next-vm #5 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x4b/0x70 print_report+0x153/0x49c kasan_report+0xbc/0xf0 __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] mmu_alloc_root+0x141/0x320 [kvm] kvm_mmu_load+0x612/0x20f0 [kvm] kvm_arch_vcpu_ioctl_run+0x3dd5/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Allocated by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x5f/0x70 kmem_cache_alloc_noprof+0xfe/0x2e0 __kvm_mmu_topup_memory_cache+0x135/0x530 [kvm] paging64_page_fault+0x318/0x1e30 [kvm] kvm_mmu_do_page_fault+0x21d/0x630 [kvm] kvm_mmu_page_fault+0x18c/0x17b0 [kvm] kvm_arch_vcpu_ioctl_run+0x1f35/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free+0xe2/0x400 kvm_mmu_commit_zap_page.part.0+0x1e2/0x310 [kvm] kvm_mmu_free_roots+0x283/0x560 [kvm] kvm_arch_vcpu_ioctl_run+0x33c8/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||
| CVE-2026-80118 | 1 Passmark | 3 Burnintest, Osforensics, Performancetest | 2026-09-07 | 7.1 High |
| PassMark PerformanceTest before 11.1 build 1012, BurnInTest before 11.1 build 1000, and OSForensics before 11.1 build 1016 contain an unauthenticated physical memory disclosure in DirectIo64.sys, reachable by unprivileged local users through a single IOCTL with no caller-identity check. The handler writes a crash-dump-format (PAGEDU64) image of all physical memory to a caller-supplied file path in the SYSTEM context, allowing a standard user to create files in locations they cannot otherwise write and to recover memory belonging to processes of other users. The image is preceded by a header that exposes the kernel loaded-module list, active-process list and PFN database pointers, defeating KASLR. The same handler also dereferences the return value of an internal kernel-structure locator without a NULL check; that locator returns NULL on three distinct failure paths, and a kernel crash results on builds where any of those paths is taken. | ||||
| CVE-2026-19534 | 1 Undici | 1 Undici | 2026-09-05 | 7.5 High |
| undici's WebSocket client crashes the whole Node.js process during the opening handshake when a server responds with a subprotocol that the client never requested. A default WebSocket connection sends no subprotocol, but if the server's 101 response includes a Sec-WebSocket-Protocol header, undici dereferences a null value while checking it against the requested list and throws an uncaught TypeError. Because that code runs inside a microtask with no surrounding error handling, the exception propagates and terminates the process under Node's default behavior, instead of gracefully failing the connection as required by the WebSocket protocol. Any application that opens a WebSocket to an attacker-controlled or compromised server, or over a plaintext connection subject to a machine-in-the-middle, can be crashed remotely without authentication in the default configuration. This affects undici versions from 6.7.0 up to 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2. | ||||
| CVE-2026-80861 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: bail out of setup if the controller is inaccessible xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory. arm64 faults on unaligned device accesses, so instead of xhci_handshake() catching the all-ones value and returning -ENODEV, setup oopses: xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible xhci-pci-renesas 0005:08:00.0: xHCI Host Controller xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1 Unable to handle kernel paging request at virtual address ffff80030a770103 ESR = 0x0000000096000021 FSC = 0x21: alignment fault Internal error: Oops: 0000000096000021 [#1] SMP pc : xhci_halt [xhci_hcd] Call trace: xhci_halt xhci_gen_setup xhci_pci_setup usb_add_hcd usb_hcd_pci_probe xhci_pci_common_probe xhci_pci_renesas_probe This was hit with a Renesas uPD720201 that failed to power up ("Unable to change power state from D3cold to D0, device inaccessible") yet still reached the HCD probe path. Read the capability register once, and if it reads back the all-ones value (as xhci_handshake() and xhci_reset() already test for), abort setup with -ENODEV before op_regs is derived from it. Reading it once also avoids re-reading a register that may change under a concurrent hot-removal. | ||||
| CVE-2026-80912 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: reject an unclaimed class value in security_get_classes() security_get_classes() sizes an array by p_classes.nprim and fills it at value - 1, so a class value the policy never defines leaves a NULL. sel_make_classes() passes every entry to sel_make_dir(), reaching the same d_alloc_name() dereference as the permission array. The class symbol table is allowed to be sparse (policydb_class_isvalid() exists to absorb that), but this getter builds its own array straight from the hash table and has no such predicate. Fail the lookup when a value went unclaimed instead of handing out the NULL. Conforming policies define every class they declare and are unaffected. | ||||
| CVE-2026-55401 | 1 Absolute | 1 Secure Access | 2026-09-04 | 5.3 Medium |
| CVE-2026-55401 is a null dereference vulnerability on the load-balancing sub-system of Secure Access servers prior to 14.57. Attackers can send an unauthenticated packet to a Secure Access server with load balancing enabled, which results in the internal load balancer crashing. After a successful attack, the Secure Access server is still able to accept connections and is still able to issue a failover to connected clients. https://www.first.org/cvss/calculator/4.0#CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:L | ||||