Filtered by vendor Linux
Subscriptions
Total
18640 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68252 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup In fastrpc_map_lookup, dma_buf_get is called to obtain a reference to the dma_buf for comparison purposes. However, this reference is never released when the function returns, leading to a dma_buf memory leak. Fix this by adding dma_buf_put before returning from the function, ensuring that the temporarily acquired reference is properly released regardless of whether a matching map is found. Rule: add | ||||
| CVE-2022-50664 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: fix leak of memory fw | ||||
| CVE-2025-68244 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD On completion of i915_vma_pin_ww(), a synchronous variant of dma_fence_work_commit() is called. When pinning a VMA to GGTT address space on a Cherry View family processor, or on a Broxton generation SoC with VTD enabled, i.e., when stop_machine() is then called from intel_ggtt_bind_vma(), that can potentially lead to lock inversion among reservation_ww and cpu_hotplug locks. [86.861179] ====================================================== [86.861193] WARNING: possible circular locking dependency detected [86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U [86.861226] ------------------------------------------------------ [86.861238] i915_module_loa/1432 is trying to acquire lock: [86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50 [86.861290] but task is already holding lock: [86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.862233] which lock already depends on the new lock. [86.862251] the existing dependency chain (in reverse order) is: [86.862265] -> #5 (reservation_ww_class_mutex){+.+.}-{3:3}: [86.862292] dma_resv_lockdep+0x19a/0x390 [86.862315] do_one_initcall+0x60/0x3f0 [86.862334] kernel_init_freeable+0x3cd/0x680 [86.862353] kernel_init+0x1b/0x200 [86.862369] ret_from_fork+0x47/0x70 [86.862383] ret_from_fork_asm+0x1a/0x30 [86.862399] -> #4 (reservation_ww_class_acquire){+.+.}-{0:0}: [86.862425] dma_resv_lockdep+0x178/0x390 [86.862440] do_one_initcall+0x60/0x3f0 [86.862454] kernel_init_freeable+0x3cd/0x680 [86.862470] kernel_init+0x1b/0x200 [86.862482] ret_from_fork+0x47/0x70 [86.862495] ret_from_fork_asm+0x1a/0x30 [86.862509] -> #3 (&mm->mmap_lock){++++}-{3:3}: [86.862531] down_read_killable+0x46/0x1e0 [86.862546] lock_mm_and_find_vma+0xa2/0x280 [86.862561] do_user_addr_fault+0x266/0x8e0 [86.862578] exc_page_fault+0x8a/0x2f0 [86.862593] asm_exc_page_fault+0x27/0x30 [86.862607] filldir64+0xeb/0x180 [86.862620] kernfs_fop_readdir+0x118/0x480 [86.862635] iterate_dir+0xcf/0x2b0 [86.862648] __x64_sys_getdents64+0x84/0x140 [86.862661] x64_sys_call+0x1058/0x2660 [86.862675] do_syscall_64+0x91/0xe90 [86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.862703] -> #2 (&root->kernfs_rwsem){++++}-{3:3}: [86.862725] down_write+0x3e/0xf0 [86.862738] kernfs_add_one+0x30/0x3c0 [86.862751] kernfs_create_dir_ns+0x53/0xb0 [86.862765] internal_create_group+0x134/0x4c0 [86.862779] sysfs_create_group+0x13/0x20 [86.862792] topology_add_dev+0x1d/0x30 [86.862806] cpuhp_invoke_callback+0x4b5/0x850 [86.862822] cpuhp_issue_call+0xbf/0x1f0 [86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320 [86.862852] __cpuhp_setup_state+0xb0/0x220 [86.862866] topology_sysfs_init+0x30/0x50 [86.862879] do_one_initcall+0x60/0x3f0 [86.862893] kernel_init_freeable+0x3cd/0x680 [86.862908] kernel_init+0x1b/0x200 [86.862921] ret_from_fork+0x47/0x70 [86.862934] ret_from_fork_asm+0x1a/0x30 [86.862947] -> #1 (cpuhp_state_mutex){+.+.}-{3:3}: [86.862969] __mutex_lock+0xaa/0xed0 [86.862982] mutex_lock_nested+0x1b/0x30 [86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320 [86.863012] __cpuhp_setup_state+0xb0/0x220 [86.863026] page_alloc_init_cpuhp+0x2d/0x60 [86.863041] mm_core_init+0x22/0x2d0 [86.863054] start_kernel+0x576/0xbd0 [86.863068] x86_64_start_reservations+0x18/0x30 [86.863084] x86_64_start_kernel+0xbf/0x110 [86.863098] common_startup_64+0x13e/0x141 [86.863114] -> #0 (cpu_hotplug_lock){++++}-{0:0}: [86.863135] __lock_acquire+0x16 ---truncated--- | ||||
| CVE-2025-68241 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe The sit driver's packet transmission path calls: sit_tunnel_xmit() -> update_or_create_fnhe(), which lead to fnhe_remove_oldest() being called to delete entries exceeding FNHE_RECLAIM_DEPTH+random. The race window is between fnhe_remove_oldest() selecting fnheX for deletion and the subsequent kfree_rcu(). During this time, the concurrent path's __mkroute_output() -> find_exception() can fetch the soon-to-be-deleted fnheX, and rt_bind_exception() then binds it with a new dst using a dst_hold(). When the original fnheX is freed via RCU, the dst reference remains permanently leaked. CPU 0 CPU 1 __mkroute_output() find_exception() [fnheX] update_or_create_fnhe() fnhe_remove_oldest() [fnheX] rt_bind_exception() [bind dst] RCU callback [fnheX freed, dst leak] This issue manifests as a device reference count leak and a warning in dmesg when unregistering the net device: unregister_netdevice: waiting for sitX to become free. Usage count = N Ido Schimmel provided the simple test validation method [1]. The fix clears 'oldest->fnhe_daddr' before calling fnhe_flush_routes(). Since rt_bind_exception() checks this field, setting it to zero prevents the stale fnhe from being reused and bound to a new dst just before it is freed. [1] ip netns add ns1 ip -n ns1 link set dev lo up ip -n ns1 address add 192.0.2.1/32 dev lo ip -n ns1 link add name dummy1 up type dummy ip -n ns1 route add 192.0.2.2/32 dev dummy1 ip -n ns1 link add name gretap1 up arp off type gretap \ local 192.0.2.1 remote 192.0.2.2 ip -n ns1 route add 198.51.0.0/16 dev gretap1 taskset -c 0 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q & taskset -c 2 ip netns exec ns1 mausezahn gretap1 \ -A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q & sleep 10 ip netns pids ns1 | xargs kill ip netns del ns1 | ||||
| CVE-2023-54136 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: sprd: Fix DMA buffer leak issue Release DMA buffer when _probe() returns failure to avoid memory leak. | ||||
| CVE-2025-40280 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free in tipc_mon_reinit_self(). syzbot reported use-after-free of tipc_net(net)->monitors[] in tipc_mon_reinit_self(). [0] The array is protected by RTNL, but tipc_mon_reinit_self() iterates over it without RTNL. tipc_mon_reinit_self() is called from tipc_net_finalize(), which is always under RTNL except for tipc_net_finalize_work(). Let's hold RTNL in tipc_net_finalize_work(). [0]: BUG: KASAN: slab-use-after-free in __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162 Read of size 1 at addr ffff88805eae1030 by task kworker/0:7/5989 CPU: 0 UID: 0 PID: 5989 Comm: kworker/0:7 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 Workqueue: events tipc_net_finalize_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __kasan_check_byte+0x2a/0x40 mm/kasan/common.c:568 kasan_check_byte include/linux/kasan.h:399 [inline] lock_acquire+0x8d/0x360 kernel/locking/lockdep.c:5842 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162 rtlock_slowlock kernel/locking/rtmutex.c:1894 [inline] rwbase_rtmutex_lock_state kernel/locking/spinlock_rt.c:160 [inline] rwbase_write_lock+0xd3/0x7e0 kernel/locking/rwbase_rt.c:244 rt_write_lock+0x76/0x110 kernel/locking/spinlock_rt.c:243 write_lock_bh include/linux/rwlock_rt.h:99 [inline] tipc_mon_reinit_self+0x79/0x430 net/tipc/monitor.c:718 tipc_net_finalize+0x115/0x190 net/tipc/net.c:140 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3319 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3400 kthread+0x70e/0x8a0 kernel/kthread.c:463 ret_from_fork+0x439/0x7d0 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 6089: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x1a8/0x320 mm/slub.c:4407 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] tipc_mon_create+0xc3/0x4d0 net/tipc/monitor.c:657 tipc_enable_bearer net/tipc/bearer.c:357 [inline] __tipc_nl_bearer_enable+0xe16/0x13f0 net/tipc/bearer.c:1047 __tipc_nl_compat_doit net/tipc/netlink_compat.c:371 [inline] tipc_nl_compat_doit+0x3bc/0x5f0 net/tipc/netlink_compat.c:393 tipc_nl_compat_handle net/tipc/netlink_compat.c:-1 [inline] tipc_nl_compat_recv+0x83c/0xbe0 net/tipc/netlink_compat.c:1321 genl_family_rcv_msg_doit+0x215/0x300 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x60e/0x790 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x846/0xa10 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:729 ____sys_sendmsg+0x508/0x820 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x1a1/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/ ---truncated--- | ||||
| CVE-2022-50667 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix memory leak in vmw_mksstat_add_ioctl() If the copy of the description string from userspace fails, then the page for the instance descriptor doesn't get freed before returning -EFAULT, which leads to a memleak. | ||||
| CVE-2025-68229 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show() If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and we attempt to dereference it in tcm_loop_tpg_address_show() we will get a segfault, see below for an example. So, check tl_hba->sh before dereferencing it. Unable to allocate struct scsi_host BUG: kernel NULL pointer dereference, address: 0000000000000194 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop] ... Call Trace: <TASK> configfs_read_iter+0x12d/0x1d0 [configfs] vfs_read+0x1b5/0x300 ksys_read+0x6f/0xf0 ... | ||||
| CVE-2023-53828 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor() KSAN reports use-after-free in hci_add_adv_monitor(). While adding an adv monitor, hci_add_adv_monitor() calls -> msft_add_monitor_pattern() calls -> msft_add_monitor_sync() calls -> msft_le_monitor_advertisement_cb() calls in an error case -> hci_free_adv_monitor() which frees the *moniter. This is referenced by bt_dev_dbg() in hci_add_adv_monitor(). Fix the bt_dev_dbg() by using handle instead of monitor->handle. | ||||
| CVE-2025-68222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its fields are initialized. Notably, num_custom_params is used in pinconf_generic_parse_dt_config(), resulting in intermittent allocation errors, such as the following splat when probing i2c-imx: WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300 [...] Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT) [...] Call trace: __alloc_pages_noprof+0x290/0x300 (P) ___kmalloc_large_node+0x84/0x168 __kmalloc_large_node_noprof+0x34/0x120 __kmalloc_noprof+0x2ac/0x378 pinconf_generic_parse_dt_config+0x68/0x1a0 s32_dt_node_to_map+0x104/0x248 dt_to_map_one_config+0x154/0x1d8 pinctrl_dt_to_map+0x12c/0x280 create_pinctrl+0x6c/0x270 pinctrl_get+0xc0/0x170 devm_pinctrl_get+0x50/0xa0 pinctrl_bind_pins+0x60/0x2a0 really_probe+0x60/0x3a0 [...] __platform_driver_register+0x2c/0x40 i2c_adap_imx_init+0x28/0xff8 [i2c_imx] [...] This results in later parse failures that can cause issues in dependent drivers: s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property [...] pca953x 0-0022: failed writing register: -6 i2c i2c-0: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property i2c i2c-1: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property i2c i2c-2: IMX I2C adapter registered Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of devm_kmalloc() in s32_pinctrl_probe(), which sets the previously uninitialized fields to zero. | ||||
| CVE-2025-68738 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix null pointer deref in mt7996_conf_tx() If a link does not have an assigned channel yet, mt7996_vif_link returns NULL. We still need to store the updated queue settings in that case, and apply them later. Move the location of the queue params to within struct mt7996_vif_link. | ||||
| CVE-2025-40215 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: delete x->tunnel as we delete x The ipcomp fallback tunnels currently get deleted (from the various lists and hashtables) as the last user state that needed that fallback is destroyed (not deleted). If a reference to that user state still exists, the fallback state will remain on the hashtables/lists, triggering the WARN in xfrm_state_fini. Because of those remaining references, the fix in commit f75a2804da39 ("xfrm: destroy xfrm_state synchronously on net exit path") is not complete. We recently fixed one such situation in TCP due to defered freeing of skbs (commit 9b6412e6979f ("tcp: drop secpath at the same time as we currently drop dst")). This can also happen due to IP reassembly: skbs with a secpath remain on the reassembly queue until netns destruction. If we can't guarantee that the queues are flushed by the time xfrm_state_fini runs, there may still be references to a (user) xfrm_state, preventing the timely deletion of the corresponding fallback state. Instead of chasing each instance of skbs holding a secpath one by one, this patch fixes the issue directly within xfrm, by deleting the fallback state as soon as the last user state depending on it has been deleted. Destruction will still happen when the final reference is dropped. A separate lockdep class for the fallback state is required since we're going to lock x->tunnel while x is locked. | ||||
| CVE-2025-40270 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm, swap: fix potential UAF issue for VMA readahead Since commit 78524b05f1a3 ("mm, swap: avoid redundant swap device pinning"), the common helper for allocating and preparing a folio in the swap cache layer no longer tries to get a swap device reference internally, because all callers of __read_swap_cache_async are already holding a swap entry reference. The repeated swap device pinning isn't needed on the same swap device. Caller of VMA readahead is also holding a reference to the target entry's swap device, but VMA readahead walks the page table, so it might encounter swap entries from other devices, and call __read_swap_cache_async on another device without holding a reference to it. So it is possible to cause a UAF when swapoff of device A raced with swapin on device B, and VMA readahead tries to read swap entries from device A. It's not easy to trigger, but in theory, it could cause real issues. Make VMA readahead try to get the device reference first if the swap device is a different one from the target entry. | ||||
| CVE-2025-40278 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: act_ife: initialize struct tc_ife to fix KMSAN kernel-infoleak Fix a KMSAN kernel-infoleak detected by the syzbot . [net?] KMSAN: kernel-infoleak in __skb_datagram_iter In tcf_ife_dump(), the variable 'opt' was partially initialized using a designatied initializer. While the padding bytes are reamined uninitialized. nla_put() copies the entire structure into a netlink message, these uninitialized bytes leaked to userspace. Initialize the structure with memset before assigning its fields to ensure all members and padding are cleared prior to beign copied. This change silences the KMSAN report and prevents potential information leaks from the kernel memory. This fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures no infoleak. | ||||
| CVE-2025-40287 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix improper check of dentry.stream.valid_size We found an infinite loop bug in the exFAT file system that can lead to a Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is malformed, the following system calls — SYS_openat, SYS_ftruncate, and SYS_pwrite64 — can cause the kernel to hang. Root cause analysis shows that the size validation code in exfat_find() does not check whether dentry.stream.valid_size is negative. As a result, the system calls mentioned above can succeed and eventually trigger the DoS issue. This patch adds a check for negative dentry.stream.valid_size to prevent this vulnerability. | ||||
| CVE-2025-40249 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: make sure the cdev fd is still active before emitting events With the final call to fput() on a file descriptor, the release action may be deferred and scheduled on a work queue. The reference count of that descriptor is still zero and it must not be used. It's possible that a GPIO change, we want to notify the user-space about, happens AFTER the reference count on the file descriptor associated with the character device went down to zero but BEFORE the .release() callback was called from the workqueue and so BEFORE we unregistered from the notifier. Using the regular get_file() routine in this situation triggers the following warning: struct file::f_count incremented from zero; use-after-free condition present! So use the get_file_active() variant that will return NULL on file descriptors that have been or are being released. | ||||
| CVE-2025-40303 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: ensure no dirty metadata is written back for an fs with errors [BUG] During development of a minor feature (make sure all btrfs_bio::end_io() is called in task context), I noticed a crash in generic/388, where metadata writes triggered new works after btrfs_stop_all_workers(). It turns out that it can even happen without any code modification, just using RAID5 for metadata and the same workload from generic/388 is going to trigger the use-after-free. [CAUSE] If btrfs hits an error, the fs is marked as error, no new transaction is allowed thus metadata is in a frozen state. But there are some metadata modifications before that error, and they are still in the btree inode page cache. Since there will be no real transaction commit, all those dirty folios are just kept as is in the page cache, and they can not be invalidated by invalidate_inode_pages2() call inside close_ctree(), because they are dirty. And finally after btrfs_stop_all_workers(), we call iput() on btree inode, which triggers writeback of those dirty metadata. And if the fs is using RAID56 metadata, this will trigger RMW and queue new works into rmw_workers, which is already stopped, causing warning from queue_work() and use-after-free. [FIX] Add a special handling for write_one_eb(), that if the fs is already in an error state, immediately mark the bbio as failure, instead of really submitting them. Then during close_ctree(), iput() will just discard all those dirty tree blocks without really writing them back, thus no more new jobs for already stopped-and-freed workqueues. The extra discard in write_one_eb() also acts as an extra safenet. E.g. the transaction abort is triggered by some extent/free space tree corruptions, and since extent/free space tree is already corrupted some tree blocks may be allocated where they shouldn't be (overwriting existing tree blocks). In that case writing them back will further corrupting the fs. | ||||
| CVE-2025-40310 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw There is race in amdgpu_amdkfd_device_fini_sw and interrupt. if amdgpu_amdkfd_device_fini_sw run in b/w kfd_cleanup_nodes and kfree(kfd), and KGD interrupt generated. kernel panic log: BUG: kernel NULL pointer dereference, address: 0000000000000098 amdgpu 0000:c8:00.0: amdgpu: Requesting 4 partitions through PSP PGD d78c68067 P4D d78c68067 kfd kfd: amdgpu: Allocated 3969056 bytes on gart PUD 1465b8067 PMD @ Oops: @002 [#1] SMP NOPTI kfd kfd: amdgpu: Total number of KFD nodes to be created: 4 CPU: 115 PID: @ Comm: swapper/115 Kdump: loaded Tainted: G S W OE K RIP: 0010:_raw_spin_lock_irqsave+0x12/0x40 Code: 89 e@ 41 5c c3 cc cc cc cc 66 66 2e Of 1f 84 00 00 00 00 00 OF 1f 40 00 Of 1f 44% 00 00 41 54 9c 41 5c fa 31 cO ba 01 00 00 00 <fO> OF b1 17 75 Ba 4c 89 e@ 41 Sc 89 c6 e8 07 38 5d RSP: 0018: ffffc90@1a6b0e28 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000018 0000000000000001 RSI: ffff8883bb623e00 RDI: 0000000000000098 ffff8883bb000000 RO8: ffff888100055020 ROO: ffff888100055020 0000000000000000 R11: 0000000000000000 R12: 0900000000000002 ffff888F2b97da0@ R14: @000000000000098 R15: ffff8883babdfo00 CS: 010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000098 CR3: 0000000e7cae2006 CR4: 0000000002770ce0 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 0000000000000000 DR6: 00000000fffeO7FO DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> kgd2kfd_interrupt+@x6b/0x1f@ [amdgpu] ? amdgpu_fence_process+0xa4/0x150 [amdgpu] kfd kfd: amdgpu: Node: 0, interrupt_bitmap: 3 YcpxFl Rant tErace amdgpu_irq_dispatch+0x165/0x210 [amdgpu] amdgpu_ih_process+0x80/0x100 [amdgpu] amdgpu: Virtual CRAT table created for GPU amdgpu_irq_handler+0x1f/@x60 [amdgpu] __handle_irq_event_percpu+0x3d/0x170 amdgpu: Topology: Add dGPU node [0x74a2:0x1002] handle_irq_event+0x5a/@xcO handle_edge_irq+0x93/0x240 kfd kfd: amdgpu: KFD node 1 partition @ size 49148M asm_call_irq_on_stack+0xf/@x20 </IRQ> common_interrupt+0xb3/0x130 asm_common_interrupt+0x1le/0x40 5.10.134-010.a1i5000.a18.x86_64 #1 | ||||
| CVE-2025-40308 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bcsp: receive data only if registered Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH. | ||||
| CVE-2023-53847 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb-storage: alauda: Fix uninit-value in alauda_check_media() Syzbot got KMSAN to complain about access to an uninitialized value in the alauda subdriver of usb-storage: BUG: KMSAN: uninit-value in alauda_transport+0x462/0x57f0 drivers/usb/storage/alauda.c:1137 CPU: 0 PID: 12279 Comm: usb-storage Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108 __msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250 alauda_check_media+0x344/0x3310 drivers/usb/storage/alauda.c:460 The problem is that alauda_check_media() doesn't verify that its USB transfer succeeded before trying to use the received data. What should happen if the transfer fails isn't entirely clear, but a reasonably conservative approach is to pretend that no media is present. A similar problem exists in a usb_stor_dbg() call in alauda_get_media_status(). In this case, when an error occurs the call is redundant, because usb_stor_ctrl_transfer() already will print a debugging message. Finally, unrelated to the uninitialized memory access, is the fact that alauda_check_media() performs DMA to a buffer on the stack. Fortunately usb-storage provides a general purpose DMA-able buffer for uses like this. We'll use it instead. | ||||