Total
1140 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-16411 | 1 Mozilla | 1 Firefox | 2026-07-27 | 9.8 Critical |
| Memory safety bugs present in Firefox 152. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 153 and Thunderbird 153. | ||||
| CVE-2026-16805 | 1 Google | 1 Chrome | 2026-07-27 | 8.8 High |
| Use after free in Blink in Google Chrome prior to 150.0.7871.186 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-64265 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req When fuse_resend() moves a request from fpq->processing back to fiq->pending, it sets FR_PENDING and clears FR_SENT but does not remove the requests intr_entry from fiq->interrupts. If the request had FR_INTERRUPTED set from a prior signal, intr_entry remains dangling on fiq->interrupts. When the requesting task then receives a fatal signal, fuse_remove_pending_req() sees FR_PENDING=1, removes the request from fiq->pending and frees it via the refcount path, also without cleaning intr_entry. The stale intr_entry causes use-after-free when fuse_read_interrupt() iterates fiq->interrupts: - list_del_init(&req->intr_entry) -> UAF write on freed slab - req->in.h.unique -> UAF read, data leaked to userspace Remove intr_entry from fiq->interrupts in fuse_resend() for interrupted requests before they are placed back on fiq->pending. Add a WARN_ON if the intr_entry is not empty on request destruction. | ||||
| CVE-2026-64530 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the defragmentation engine (e.g. act_ct on out-of-order fragments). When that happens the skb is no longer owned by the caller and must not be touched again. tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the switch and returned the skb to the caller as if classification had passed. The only qdisc that wires up qevents today is RED, via three call sites (qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop) red_enqueue() was continuing to operate on an skb it no longer owns in this case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF. tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10 tc filter add block 10 ... action ct (with ct defrag enabled and traffic that produces out-of-order fragments, e.g. a fragmented UDP stream) Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress and egress fast paths do: treat it as stolen and return NULL without touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be dropped/freed here, as it is no longer owned by us. | ||||
| CVE-2026-15773 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-07-26 | 9.6 Critical |
| Use after free in Core in Google Chrome on Windows prior to 150.0.7871.125 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-63875 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Flush walk cache when unsharing PMD tables When huge_pmd_unshare() is called to unshare a PMD table, the tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true but the aarch64 tlb_flush() only checked tlb->freed_tables to determine whether to use TLBF_NONE (vae1is, invalidates walk cache) or TLBF_NOWALKCACHE (vale1is, leaf-only). This caused the stale PMD page table entry to remain in the walk cache after unshare, potentially leading to incorrect page table walks. Fix by including unshared_tables in the check, so that when unsharing tables, TLBF_NONE is used and the walk cache is properly invalidated. Here is the detailed distinction between vae1is and vale1is: | Instruction Combination | Actual Invalidation Scope | | ------------------------ | --------------------------------------------------| | `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) | | `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 | | `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) | | `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | | ||||
| CVE-2026-63905 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: Fix use after free bug in vudc_remove due to race condition This patch follows up Zheng Wang's 2023 report of a use-after-free in vudc_remove(). The original thread stalled on Shuah Khan's request for runtime testing of the unplug/unbind path. This patch supplies that testing and keeps Zheng's original fix shape. In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer(). usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer(). vudc_remove() can then free the containing struct vudc while the timer is still pending or executing. KASAN confirms the race on an unpatched x86_64 QEMU guest with CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop that repeatedly writes a socket fd to usbip_sockfd, closes the socket pair, and unbinds/rebinds usbip-vudc.0: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0 Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239 Allocated by task 239: vudc_probe+0x4d/0xaa0 Freed by task 239: kfree+0x18f/0x520 device_release_driver_internal+0x388/0x540 unbind_store+0xd9/0x100 This lands in the timer core rather than v_timer() itself because the embedded timer_list is being walked after its containing struct vudc has already been freed. The underlying lifetime bug is the same one Zheng reported. With v_stop_timer() called from vudc_remove() and the timer deleted synchronously, the same harness completed 5000 bind/unbind iterations with no KASAN report. | ||||
| CVE-2026-63906 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Fix use-after-free in omap2430_probe() In omap2430_probe(), of_node_put(np) is called prematurely before the last access to np, leading to a use-after-free if the node's reference count drops to zero. Move the of_node_put() calls after the last use of np in both the success and error paths. | ||||
| CVE-2026-63930 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: fix use-after-free in error path In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code was using list_for_each_entry() to iterate through buffers while calling iio_buffer_put() which can free the current buffer if refcount drops to 0. The list_for_each_entry() loop macro then evaluates buf->head.next to continue iteration, accessing the freed buffer. Fix this by using list_for_each_entry_safe(). | ||||
| CVE-2026-63970 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: bind uarg before filling zerocopy skb virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg before entering the send loop, but virtio_transport_alloc_skb() still fills the skb before it inherits that uarg. When fixed-buffer vectored zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach managed frags and return -EMSGSIZE. The rollback path call kfree_skb() to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so skb_release_data() falls through to ordinary frag unref. Pass the uarg into virtio_transport_alloc_skb() and bind it immediately before virtio_transport_fill_skb(). This keeps control or no-payload skbs untouched while ensuring success and rollback share one lifetime rule. | ||||
| CVE-2026-64002 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. | ||||
| CVE-2026-64007 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */ The option bytes are written through skb->data and are fine; only the checksum update goes through th and so lands in the wrong place. The result is either a write into freed slab memory or a packet leaving with a checksum that does not match its payload. Fix by re-deriving th from skb->data + protoff immediately after skb_ensure_writable() succeeds, so the subsequent checksum update targets the linear, writable header. | ||||
| CVE-2026-64008 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix UAF via dangling GEM handle in create_bo rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via drm_gem_handle_create() early on, then performs several operations that can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after the handle is live, the error path calls drm_gem_shmem_object_free() which kfree's the object without removing the handle from the IDR. This leaves a dangling handle pointing to freed slab memory. Any subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls drm_gem_object_lookup() and dereferences freed memory (UAF). Fix by moving drm_gem_handle_create() to after all fallible operations succeed, matching the pattern used by panfrost, lima, and etnaviv. Also fix drm_mm_insert_node_generic() whose return value was silently overwritten by iommu_map_sgtable() on the next line. Add the missing error check. [tomeu: Move handle creation to the very end] | ||||
| CVE-2026-64016 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix durable reconnect error path file lifetime After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes the same ksmbd_file into the session volatile-id table. If smb2_open() then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp) and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp). In this case fp and dh_info.fp are the same object. The first put drops the reconnect lookup reference, but the final durable put can run __ksmbd_close_fd(NULL, fp). Because the final close is not session-aware, it can free the file object without removing the volatile-id entry that was just published into the session table. Use the session-aware put for the final reconnect drop when the reconnect had already succeeded and the error path is cleaning up the republished file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep using the durable-only put path. | ||||
| CVE-2026-64023 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: aggregator: fix a potential use-after-free On error we free aggr->lookups->dev_id before removing the entry from the lookup table. If a concurrent thread calls gpiod_find() before we remove the entry, it could iterate over the list and call gpiod_match_lookup_table() which unconditionally dereferences dev_id when calling strcmp(). Reverse the order of cleanup. | ||||
| CVE-2026-15774 | 1 Google | 1 Chrome | 2026-07-25 | 8.3 High |
| Use after free in Skia in Google Chrome prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-64015 | 1 Linux | 1 Linux Kernel | 2026-07-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: security/keys: fix missed RCU read section on lookup Nicholas Carlini reports that the keyring code calls assoc_array_find() in find_key_to_update() without holding the RCU read lock, while the assoc_array_gc() code really is designed around removing the node from the tree and then freeing it after an RCU grace-period. The regular key handling doesn't see this because holding the keyring semaphore hides any lifetime issues, but the persistent key handling uses a different model. Instead of extending the keyring locking, just do the simple RCU locking that the assoc_array was designed for. | ||||
| CVE-2026-64033 | 1 Linux | 1 Linux Kernel | 2026-07-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Fix use-after-free in path file creation cleanup In the error path of rtrs_srv_create_path_files(), the sysfs root folders may already have been created and srv_path->kobj may already have been initialized. If a later step fails, the cleanup currently calls kobject_put(&srv_path->kobj) before rtrs_srv_destroy_once_sysfs_root_folders(srv_path). kobject_put() may drop the last reference to srv_path->kobj and invoke the release callback, rtrs_srv_release(), which frees srv_path. The following call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then dereferences srv_path internally to access srv_path->srv, resulting in a use-after-free. This failure path is reached before rtrs_srv_create_path_files() returns success, so the successful-path lifetime handling is not involved. Fix this by destroying the sysfs root folders before calling kobject_put(&srv_path->kobj), so srv_path is still valid while the helper accesses it. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-63827 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix use-after-free in rawdata dedup loop aa_replace_profiles() walks ns->rawdata_list to dedup the incoming policy blob against entries already attached to existing profiles. Per the kernel-doc on struct aa_loaddata, list membership does not hold a reference: profiles hold pcount, and when the last pcount drops, do_ploaddata_rmfs() is queued on a workqueue that takes ns->lock and removes the entry. Between dropping the last pcount and the workqueue running, an entry remains on the list with pcount == 0. aa_get_profile_loaddata() is an unconditional kref_get() on pcount, so when the dedup loop hits such an entry, refcount hardening reports refcount_t: addition on 0; use-after-free. inside aa_replace_profiles(), and the poisoned counter then trips "saturated" and "underflow" warnings on the subsequent uses of the same loaddata. Before commit a0b7091c4de4 ("apparmor: fix race on rawdata dereference") the dedup path used a get_unless_zero-style helper on a single counter, so the existing "if (tmp)" guard was meaningful. The split-refcount refactor introduced aa_get_profile_loaddata(), which has plain kref_get() semantics, and the guard quietly became a no-op. Introduce aa_get_profile_loaddata_not0(), matching the existing _not0 convention used by aa_get_profile_not0(), and use it for the rawdata_list dedup lookup so dying entries are skipped. Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu 24.04 + stress-ng 0.17.06: stress-ng --apparmor 1 --klog-check --timeout 60s Without this patch the three refcount_t warnings fire within a few seconds. With it the same 60 s run is clean. Coverage is a smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN and CONFIG_PROVE_LOCKING would be welcome from anyone with the cycles. | ||||
| CVE-2026-63816 | 1 Linux | 1 Linux Kernel | 2026-07-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: atomic: fix UAF issue on f2fs_inode_info.atomic_inode - ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink - f2fs_gc - gc_data_segment - ra_data_block(cow_inode) - mapping = F2FS_I(inode)->atomic_inode->i_mapping : f2fs_is_cow_file(cow_inode) is true - f2fs_evict_inode(atomic_inode) - clear_inode_flag(fi->cow_inode, FI_COW_FILE) - F2FS_I(fi->cow_inode)->atomic_inode = NULL ... - truncate_inode_pages_final(atomic_inode) - f2fs_grab_cache_folio(mapping) : create folio in atomic_inode->mapping - clear_inode(atomic_inode) - BUG_ON(atomic_inode->i_data.nrpages) We need to add a reference on fi->atomic_inode before using its mapping field during garbage collection, otherwise, it will cause UAF issue. | ||||