Filtered by vendor Redhat
Subscriptions
Total
23536 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-12797 | 1 Redhat | 5 Discovery, Enterprise Linux, Logging and 2 more | 2026-04-15 | 6.3 Medium |
| Issue summary: Clients using RFC7250 Raw Public Keys (RPKs) to authenticate a server may fail to notice that the server was not authenticated, because handshakes don't abort as expected when the SSL_VERIFY_PEER verification mode is set. Impact summary: TLS and DTLS connections using raw public keys may be vulnerable to man-in-middle attacks when server authentication failure is not detected by clients. RPKs are disabled by default in both TLS clients and TLS servers. The issue only arises when TLS clients explicitly enable RPK use by the server, and the server, likewise, enables sending of an RPK instead of an X.509 certificate chain. The affected clients are those that then rely on the handshake to fail when the server's RPK fails to match one of the expected public keys, by setting the verification mode to SSL_VERIFY_PEER. Clients that enable server-side raw public keys can still find out that raw public key verification failed by calling SSL_get_verify_result(), and those that do, and take appropriate action, are not affected. This issue was introduced in the initial implementation of RPK support in OpenSSL 3.2. The FIPS modules in 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. | ||||
| CVE-2024-2467 | 1 Redhat | 2 Enterprise Linux, Openssl | 2026-04-15 | 5.9 Medium |
| A timing-based side-channel flaw exists in the perl-Crypt-OpenSSL-RSA package, which could be sufficient to recover plaintext across a network in a Bleichenbacher-style attack. To achieve successful decryption, an attacker would have to be able to send a large number of trial messages. The vulnerability affects the legacy PKCS#1v1.5 RSA encryption padding mode. | ||||
| CVE-2024-22017 | 2 Nodejs, Redhat | 2 Nodejs, Enterprise Linux | 2026-04-15 | 7.3 High |
| setuid() does not affect libuv's internal io_uring operations if initialized before the call to setuid(). This allows the process to perform privileged operations despite presumably having dropped such privileges through a call to setuid(). This vulnerability affects all users using version greater or equal than Node.js 18.18.0, Node.js 20.4.0 and Node.js 21. | ||||
| CVE-2024-4028 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2026-04-15 | 3.8 Low |
| A vulnerability was found in Keycloak. This issue may allow a privileged attacker to use a malicious payload as the permission while creating items (Resource and Permissions) from the admin console, leading to a stored cross-site scripting (XSS) attack. | ||||
| CVE-2023-46103 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 4.7 Medium |
| Sequence of processor instructions leads to unexpected behavior in Intel(R) Core(TM) Ultra Processors may allow an authenticated user to potentially enable denial of service via local access. | ||||
| CVE-2024-3154 | 1 Redhat | 1 Openshift | 2026-04-15 | 7.2 High |
| A flaw was found in cri-o, where an arbitrary systemd property can be injected via a Pod annotation. Any user who can create a pod with an arbitrary annotation may perform an arbitrary action on the host system. | ||||
| CVE-2024-31419 | 1 Redhat | 1 Container Native Virtualization | 2026-04-15 | 4.3 Medium |
| An information disclosure flaw was found in OpenShift Virtualization. The DownwardMetrics feature was introduced to expose host metrics to virtual machine guests and is enabled by default. This issue could expose limited host metrics of a node to any guest in any namespace without being explicitly enabled by an administrator. | ||||
| CVE-2024-43803 | 1 Redhat | 1 Openshift | 2026-04-15 | 4.9 Medium |
| The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. The `BareMetalHost` (BMH) CRD allows the `userData`, `metaData`, and `networkData` for the provisioned host to be specified as links to Kubernetes Secrets. There are fields for both the `Name` and `Namespace` of the Secret, meaning that versions of the baremetal-operator prior to 0.8.0, 0.6.2, and 0.5.2 will read a `Secret` from any namespace. A user with access to create or edit a `BareMetalHost` can thus exfiltrate a `Secret` from another namespace by using it as e.g. the `userData` for provisioning some host (note that this need not be a real host, it could be a VM somewhere). BMO will only read a key with the name `value` (or `userData`, `metaData`, or `networkData`), so that limits the exposure somewhat. `value` is probably a pretty common key though. Secrets used by _other_ `BareMetalHost`s in different namespaces are always vulnerable. It is probably relatively unusual for anyone other than cluster administrators to have RBAC access to create/edit a `BareMetalHost`. This vulnerability is only meaningful, if the cluster has users other than administrators and users' privileges are limited to their respective namespaces. The patch prevents BMO from accepting links to Secrets from other namespaces as BMH input. Any BMH configuration is only read from the same namespace only. The problem is patched in BMO releases v0.7.0, v0.6.2 and v0.5.2 and users should upgrade to those versions. Prior upgrading, duplicate the BMC Secrets to the namespace where the corresponding BMH is. After upgrade, remove the old Secrets. As a workaround, an operator can configure BMO RBAC to be namespace scoped for Secrets, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces. | ||||
| CVE-2024-6655 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 7 High |
| A flaw was found in the GTK library. Under certain conditions, it is possible for a library to be injected into a GTK application from the current working directory. | ||||
| CVE-2022-28693 | 1 Redhat | 4 Enterprise Linux, Rhel Eus, Rhel Extras Rt and 1 more | 2026-04-15 | 4.7 Medium |
| Unprotected alternative channel of return branch target prediction in some Intel(R) Processors may allow an authorized user to potentially enable information disclosure via local access. | ||||
| CVE-2024-45770 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2026-04-15 | 4.4 Medium |
| A vulnerability was found in Performance Co-Pilot (PCP). This flaw can only be exploited if an attacker has access to a compromised PCP system account. The issue is related to the pmpost tool, which is used to log messages in the system. Under certain conditions, it runs with high-level privileges. | ||||
| CVE-2024-45341 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 6.1 Medium |
| A certificate with a URI which has a IPv6 address with a zone ID may incorrectly satisfy a URI name constraint that applies to the certificate chain. Certificates containing URIs are not permitted in the web PKI, so this only affects users of private PKIs which make use of URIs. | ||||
| CVE-2024-45769 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2026-04-15 | 5.5 Medium |
| A vulnerability was found in Performance Co-Pilot (PCP). This flaw allows an attacker to send specially crafted data to the system, which could cause the program to misbehave or crash. | ||||
| CVE-2024-1023 | 1 Redhat | 20 A Mq Clients, Amq Broker, Amq Streams and 17 more | 2026-04-15 | 6.5 Medium |
| A vulnerability in the Eclipse Vert.x toolkit results in a memory leak due to using Netty FastThreadLocal data structures. Specifically, when the Vert.x HTTP client establishes connections to different hosts, triggering the memory leak. The leak can be accelerated with intimate runtime knowledge, allowing an attacker to exploit this vulnerability. For instance, a server accepting arbitrary internet addresses could serve as an attack vector by connecting to these addresses, thereby accelerating the memory leak. | ||||
| CVE-2024-45332 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-04-15 | 5.6 Medium |
| Exposure of sensitive information caused by shared microarchitectural predictor state that influences transient execution in the indirect branch predictors for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. | ||||
| CVE-2024-11187 | 1 Redhat | 8 Enterprise Linux, Openshift, Openshift Ai and 5 more | 2026-04-15 | 7.5 High |
| It is possible to construct a zone such that some queries to it will generate responses containing numerous records in the Additional section. An attacker sending many such queries can cause either the authoritative server itself or an independent resolver to use disproportionate resources processing the queries. Zones will usually need to have been deliberately crafted to attack this exposure. This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.32-S1. | ||||
| CVE-2024-8612 | 1 Redhat | 2 Advanced Virtualization, Enterprise Linux | 2026-04-15 | 3.8 Low |
| A flaw was found in QEMU, in the virtio-scsi, virtio-blk, and virtio-crypto devices. The size for virtqueue_push as set in virtio_scsi_complete_req / virtio_blk_req_complete / virito_crypto_req_complete could be larger than the true size of the data which has been sent to guest. Once virtqueue_push() finally calls dma_memory_unmap to ummap the in_iov, it may call the address_space_write function to write back the data. Some uninitialized data may exist in the bounce.buffer, leading to an information leak. | ||||
| CVE-2023-6544 | 1 Redhat | 3 Build Keycloak, Red Hat Single Sign On, Rhosemc | 2026-04-15 | 5.4 Medium |
| A flaw was found in the Keycloak package. This issue occurs due to a permissive regular expression hardcoded for filtering which allows hosts to register a dynamic client. A malicious user with enough information about the environment could jeopardize an environment with this specific Dynamic Client Registration and TrustedDomain configuration previously unauthorized. | ||||
| CVE-2023-38575 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 5.5 Medium |
| Non-transparent sharing of return predictor targets between contexts in some Intel(R) Processors may allow an authorized user to potentially enable information disclosure via local access. | ||||
| CVE-2024-45812 | 2 Redhat, Vitejs | 2 Openshift Distributed Tracing, Vite | 2026-04-15 | 6.4 Medium |
| Vite a frontend build tooling framework for javascript. Affected versions of vite were discovered to contain a DOM Clobbering vulnerability when building scripts to `cjs`/`iife`/`umd` output format. The DOM Clobbering gadget in the module can lead to cross-site scripting (XSS) in web pages where scriptless attacker-controlled HTML elements (e.g., an img tag with an unsanitized name attribute) are present. DOM Clobbering is a type of code-reuse attack where the attacker first embeds a piece of non-script, seemingly benign HTML markups in the webpage (e.g. through a post or comment) and leverages the gadgets (pieces of js code) living in the existing javascript code to transform it into executable code. We have identified a DOM Clobbering vulnerability in Vite bundled scripts, particularly when the scripts dynamically import other scripts from the assets folder and the developer sets the build output format to `cjs`, `iife`, or `umd`. In such cases, Vite replaces relative paths starting with `__VITE_ASSET__` using the URL retrieved from `document.currentScript`. However, this implementation is vulnerable to a DOM Clobbering attack. The `document.currentScript` lookup can be shadowed by an attacker via the browser's named DOM tree element access mechanism. This manipulation allows an attacker to replace the intended script element with a malicious HTML element. When this happens, the src attribute of the attacker-controlled element is used as the URL for importing scripts, potentially leading to the dynamic loading of scripts from an attacker-controlled server. This vulnerability can result in cross-site scripting (XSS) attacks on websites that include Vite-bundled files (configured with an output format of `cjs`, `iife`, or `umd`) and allow users to inject certain scriptless HTML tags without properly sanitizing the name or id attributes. This issue has been patched in versions 5.4.6, 5.3.6, 5.2.14, 4.5.5, and 3.2.11. Users are advised to upgrade. There are no known workarounds for this vulnerability. | ||||