Filtered by vendor Redhat
Subscriptions
Filtered by product Ansible Automation Platform
Subscriptions
Total
173 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-45288 | 3 Go Standard Library, Golang, Redhat | 33 Net\/http, Http2, Acm and 30 more | 2026-04-15 | 7.5 High |
| An attacker may cause an HTTP/2 endpoint to read arbitrary amounts of header data by sending an excessive number of CONTINUATION frames. Maintaining HPACK state requires parsing and processing all HEADERS and CONTINUATION frames on a connection. When a request's headers exceed MaxHeaderBytes, no memory is allocated to store the excess headers, but they are still parsed. This permits an attacker to cause an HTTP/2 endpoint to read arbitrary amounts of header data, all associated with a request which is going to be rejected. These headers can include Huffman-encoded data which is significantly more expensive for the receiver to decode than for an attacker to send. The fix sets a limit on the amount of excess header frames we will process before closing a connection. | ||||
| CVE-2024-45296 | 2 Pillarjs, Redhat | 19 Path-to-regexp, Acm, Ansible Automation Platform and 16 more | 2026-04-15 | 7.5 High |
| path-to-regexp turns path strings into a regular expressions. In certain cases, path-to-regexp will output a regular expression that can be exploited to cause poor performance. Because JavaScript is single threaded and regex matching runs on the main thread, poor performance will block the event loop and lead to a DoS. The bad regular expression is generated any time you have two parameters within a single segment, separated by something that is not a period (.). For users of 0.1, upgrade to 0.1.10. All other users should upgrade to 8.0.0. | ||||
| CVE-2024-5569 | 1 Redhat | 5 Ansible Automation Platform, Openshift Ironic, Openstack and 2 more | 2026-04-15 | 6.2 Medium |
| A Denial of Service (DoS) vulnerability exists in the jaraco/zipp library, affecting all versions prior to 3.19.1. The vulnerability is triggered when processing a specially crafted zip file that leads to an infinite loop. This issue also impacts the zipfile module of CPython, as features from the third-party zipp library are later merged into CPython, and the affected code is identical in both projects. The infinite loop can be initiated through the use of functions affecting the `Path` module in both zipp and zipfile, such as `joinpath`, the overloaded division operator, and `iterdir`. Although the infinite loop is not resource exhaustive, it prevents the application from responding. The vulnerability was addressed in version 3.19.1 of jaraco/zipp. | ||||
| CVE-2024-4340 | 1 Redhat | 5 Ansible Automation Platform, Openstack, Rhui and 2 more | 2026-04-15 | 7.5 High |
| Passing a heavily nested list to sqlparse.parse() leads to a Denial of Service due to RecursionError. | ||||
| CVE-2024-1135 | 2 Benoitc, Redhat | 7 Gunicorn, Ansible Automation Platform, Openshift and 4 more | 2026-04-15 | N/A |
| Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure. | ||||
| CVE-2024-11483 | 1 Redhat | 3 Ansible Automation Platform, Ansible Automation Platform Developer, Ansible Automation Platform Inside | 2026-04-15 | 5 Medium |
| A vulnerability was found in the Ansible Automation Platform (AAP). This flaw allows attackers to escalate privileges by improperly leveraging read-scoped OAuth2 tokens to gain write access. This issue affects API endpoints that rely on ansible_base.oauth2_provider for OAuth2 authentication. While the impact is limited to actions within the user’s assigned permissions, it undermines scoped access controls, potentially allowing unintended modifications in the application and consuming services. | ||||
| CVE-2024-8775 | 1 Redhat | 7 Ansible Automation Platform, Ansible Automation Platform Developer, Ansible Automation Platform Inside and 4 more | 2026-04-15 | 5.5 Medium |
| A flaw was found in Ansible, where sensitive information stored in Ansible Vault files can be exposed in plaintext during the execution of a playbook. This occurs when using tasks such as include_vars to load vaulted variables without setting the no_log: true parameter, resulting in sensitive data being printed in the playbook output or logs. This can lead to the unintentional disclosure of secrets like passwords or API keys, compromising security and potentially allowing unauthorized access or actions. | ||||
| CVE-2024-55565 | 1 Redhat | 11 Acm, Ansible Automation Platform, Discovery and 8 more | 2026-04-15 | 4.3 Medium |
| nanoid (aka Nano ID) before 5.0.9 mishandles non-integer values. 3.3.8 is also a fixed version. | ||||
| CVE-2025-5988 | 1 Redhat | 2 Ansible Automation Platform, Ansible Automation Platform Developer | 2026-04-15 | 5.3 Medium |
| A flaw was found in the Ansible aap-gateway. Cross-site request forgery (CSRF) origin checking is not done on requests from the gateway to external components, such as the controller, hub, and eda. | ||||
| CVE-2024-35195 | 2 Redhat, Request Project | 10 Ansible Automation Platform, Discovery, Enterprise Linux and 7 more | 2026-04-15 | 5.6 Medium |
| Requests is a HTTP library. Prior to 2.32.0, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. This vulnerability is fixed in 2.32.0. | ||||
| CVE-2024-24788 | 1 Redhat | 15 Ansible Automation Platform, Ceph Storage, Cost Management and 12 more | 2026-04-15 | 5.9 Medium |
| A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop. | ||||
| CVE-2024-9902 | 1 Redhat | 6 Ansible Automation Platform, Ansible Automation Platform Developer, Ansible Automation Platform Inside and 3 more | 2026-04-15 | 6.3 Medium |
| A flaw was found in Ansible. The ansible-core `user` module can allow an unprivileged user to silently create or replace the contents of any file on any system path and take ownership of it when a privileged user executes the `user` module against the unprivileged user's home directory. If the unprivileged user has traversal permissions on the directory containing the exploited target file, they retain full control over the contents of the file as its owner. | ||||
| CVE-2024-6840 | 1 Redhat | 3 Ansible Automation Platform, Ansible Automation Platform Developer, Ansible Automation Platform Inside | 2026-04-15 | 6.6 Medium |
| An improper authorization flaw exists in the Ansible Automation Controller. This flaw allows an attacker using the k8S API server to send an HTTP request with a service account token mounted via `automountServiceAccountToken: true`, resulting in privilege escalation to a service account. | ||||
| CVE-2025-9907 | 1 Redhat | 6 Ansible Automation Platform, Ansible Automation Platform Developer, Ansible Automation Platform Inside and 3 more | 2026-03-26 | 6.7 Medium |
| A flaw was found in the Red Hat Ansible Automation Platform, Event-Driven Ansible (EDA) Event Stream API. This vulnerability allows exposure of sensitive client credentials and internal infrastructure headers via the test_headers field when an event stream is in test mode. The possible outcome includes leakage of internal infrastructure details, accidental disclosure of user or system credentials, privilege escalation if high-value tokens are exposed, and persistent sensitive data exposure to all users with read access on the event stream. | ||||
| CVE-2025-9908 | 1 Redhat | 6 Ansible Automation Platform, Ansible Automation Platform Developer, Ansible Automation Platform Inside and 3 more | 2026-03-25 | 6.7 Medium |
| A flaw was found in the Red Hat Ansible Automation Platform, Event-Driven Ansible (EDA) Event Streams. This vulnerability allows an authenticated user to gain access to sensitive internal infrastructure headers (such as X-Trusted-Proxy and X-Envoy-*) and event stream URLs via crafted requests and job templates. By exfiltrating these headers, an attacker could spoof trusted requests, escalate privileges, or perform malicious event injection. | ||||
| CVE-2025-9909 | 1 Redhat | 6 Ansible Automation Platform, Ansible Automation Platform Developer, Ansible Automation Platform Inside and 3 more | 2026-03-25 | 6.7 Medium |
| A flaw was found in the Red Hat Ansible Automation Platform Gateway route creation component. This vulnerability allows credential theft via the creation of misleading routes using a double-slash (//) prefix in the gateway_path. A malicious or socially engineered administrator can configure a honey-pot route to intercept and exfiltrate user credentials, potentially maintaining persistent access or creating a backdoor even after their permissions are revoked. | ||||
| CVE-2023-50782 | 3 Couchbase, Cryptography.io, Redhat | 7 Couchbase Server, Cryptography, Ansible Automation Platform and 4 more | 2026-03-24 | 7.5 High |
| A flaw was found in the python-cryptography package. This issue may allow a remote attacker to decrypt captured messages in TLS servers that use RSA key exchanges, which may lead to exposure of confidential or sensitive data. | ||||
| CVE-2023-6681 | 3 Fedoraproject, Latchset, Redhat | 7 Fedora, Jwcrypto, Ansible Automation Platform and 4 more | 2026-02-26 | 5.3 Medium |
| A vulnerability was found in JWCrypto. This flaw allows an attacker to cause a denial of service (DoS) attack and possible password brute-force and dictionary attacks to be more resource-intensive. This issue can result in a large amount of computational consumption, causing a denial of service attack. | ||||
| CVE-2025-27516 | 3 Debian, Palletsprojects, Redhat | 11 Debian Linux, Jinja, Ansible Automation Platform and 8 more | 2026-02-26 | 8.8 High |
| Jinja is an extensible templating engine. Prior to 3.1.6, an oversight in how the Jinja sandboxed environment interacts with the |attr filter allows an attacker that controls the content of a template to execute arbitrary Python code. To exploit the vulnerability, an attacker needs to control the content of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates. Jinja's sandbox does catch calls to str.format and ensures they don't escape the sandbox. However, it's possible to use the |attr filter to get a reference to a string's plain format method, bypassing the sandbox. After the fix, the |attr filter no longer bypasses the environment's attribute lookup. This vulnerability is fixed in 3.1.6. | ||||
| CVE-2023-4237 | 1 Redhat | 3 Ansible Automation Platform, Ansible Automation Platform Cloud Billing, Ansible Collection | 2026-02-25 | 7.3 High |
| A flaw was found in the Ansible Automation Platform. When creating a new keypair, the ec2_key module prints out the private key directly to the standard output. This flaw allows an attacker to fetch those keys from the log files, compromising the system's confidentiality, integrity, and availability. | ||||