Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
20035 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53822 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Ignore frags from uninitialized peer in dp. When max virtual ap interfaces are configured in all the bands with ACS and hostapd restart is done every 60s, a crash is observed at random times. In this certain scenario, a fragmented packet is received for self peer, for which rx_tid and rx_frags are not initialized in datapath. While handling this fragment, crash is observed as the rx_frag list is uninitialised and when we walk in ath11k_dp_rx_h_sort_frags, skb null leads to exception. To address this, before processing received fragments we check dp_setup_done flag is set to ensure that peer has completed its dp peer setup for fragment queue, else ignore processing the fragments. Call trace: ath11k_dp_process_rx_err+0x550/0x1084 [ath11k] ath11k_dp_service_srng+0x70/0x370 [ath11k] 0xffffffc009693a04 __napi_poll+0x30/0xa4 net_rx_action+0x118/0x270 __do_softirq+0x10c/0x244 irq_exit+0x64/0xb4 __handle_domain_irq+0x88/0xac gic_handle_irq+0x74/0xbc el1_irq+0xf0/0x1c0 arch_cpu_idle+0x10/0x18 do_idle+0x104/0x248 cpu_startup_entry+0x20/0x64 rest_init+0xd0/0xdc arch_call_rest_init+0xc/0x14 start_kernel+0x480/0x4b8 Code: f9400281 f94066a2 91405021 b94a0023 (f9406401) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2023-54230 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: amba: bus: fix refcount leak commit 5de1540b7bc4 ("drivers/amba: create devices from device tree") increases the refcount of of_node, but not releases it in amba_device_release, so there is refcount leak. By using of_node_put to avoid refcount leak. | ||||
| CVE-2023-53820 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: loop: loop_set_status_from_info() check before assignment In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should be checked before reassignment, because if an overflow error occurs, the original correct value will be changed to the wrong value, and it will not be changed back. More, the original patch did not solve the problem, the value was set and ioctl returned an error, but the subsequent io used the value in the loop driver, which still caused an alarm: loop_handle_cmd do_req_filebacked loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset; lo_rw_aio cmd->iocb.ki_pos = pos | ||||
| CVE-2023-53817 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui() During NVMeTCP Authentication a controller can trigger a kernel oops by specifying the 8192 bit Diffie Hellman group and passing a correctly sized, but zeroed Diffie Hellamn value. mpi_cmp_ui() was detecting this if the second parameter was 0, but 1 is passed from dh_is_pubkey_valid(). This causes the null pointer u->d to be dereferenced towards the end of mpi_cmp_ui() | ||||
| CVE-2023-53812 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: fix decoder disable pm crash Can't call pm_runtime_disable when the architecture support sub device for 'dev->pm.dev' is NUll, or will get below crash log. [ 10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0 [ 10.771556] lr : __pm_runtime_disable+0x30/0x130 [ 10.771558] sp : ffffffc01e4cb800 [ 10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8 [ 10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0 [ 10.771567] x25: 0000000000000002 x24: 0000000000000002 [ 10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001 [ 10.771573] x21: 0000000000000001 x20: 0000000000000000 [ 10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18 [ 10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74 [ 10.771583] x15: 00000000000002ea x14: 0000000000000058 [ 10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4 [ 10.771590] x11: 0000000000000000 x10: 0000000000000001 [ 10.771593] x9 : 0000000000000000 x8 : 00000000000000f4 [ 10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000 [ 10.771600] x5 : 0080000000000000 x4 : 0000000000000001 [ 10.771603] x3 : 0000000000000008 x2 : 0000000000000001 [ 10.771608] x1 : 0000000000000000 x0 : 00000000000000f4 [ 10.771613] Call trace: [ 10.771617] _raw_spin_lock_irq+0x4c/0xa0 [ 10.771620] __pm_runtime_disable+0x30/0x130 [ 10.771657] mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc] [ 10.771662] platform_drv_probe+0x9c/0xbc [ 10.771665] really_probe+0x13c/0x3a0 [ 10.771668] driver_probe_device+0x84/0xc0 [ 10.771671] device_driver_attach+0x54/0x78 | ||||
| CVE-2023-53811 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Cap MSIX used to online CPUs + 1 The irdma driver can use a maximum number of msix vectors equal to num_online_cpus() + 1 and the kernel warning stack below is shown if that number is exceeded. The kernel throws a warning as the driver tries to update the affinity hint with a CPU mask greater than the max CPU IDs. Fix this by capping the MSIX vectors to num_online_cpus() + 1. WARNING: CPU: 7 PID: 23655 at include/linux/cpumask.h:106 irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma] RIP: 0010:irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma] Call Trace: irdma_rt_init_hw+0xa62/0x1290 [irdma] ? irdma_alloc_local_mac_entry+0x1a0/0x1a0 [irdma] ? __is_kernel_percpu_address+0x63/0x310 ? rcu_read_lock_held_common+0xe/0xb0 ? irdma_lan_unregister_qset+0x280/0x280 [irdma] ? irdma_request_reset+0x80/0x80 [irdma] ? ice_get_qos_params+0x84/0x390 [ice] irdma_probe+0xa40/0xfc0 [irdma] ? rcu_read_lock_bh_held+0xd0/0xd0 ? irdma_remove+0x140/0x140 [irdma] ? rcu_read_lock_sched_held+0x62/0xe0 ? down_write+0x187/0x3d0 ? auxiliary_match_id+0xf0/0x1a0 ? irdma_remove+0x140/0x140 [irdma] auxiliary_bus_probe+0xa6/0x100 __driver_probe_device+0x4a4/0xd50 ? __device_attach_driver+0x2c0/0x2c0 driver_probe_device+0x4a/0x110 __driver_attach+0x1aa/0x350 bus_for_each_dev+0x11d/0x1b0 ? subsys_dev_iter_init+0xe0/0xe0 bus_add_driver+0x3b1/0x610 driver_register+0x18e/0x410 ? 0xffffffffc0b88000 irdma_init_module+0x50/0xaa [irdma] do_one_initcall+0x103/0x5f0 ? perf_trace_initcall_level+0x420/0x420 ? do_init_module+0x4e/0x700 ? __kasan_kmalloc+0x7d/0xa0 ? kmem_cache_alloc_trace+0x188/0x2b0 ? kasan_unpoison+0x21/0x50 do_init_module+0x1d1/0x700 load_module+0x3867/0x5260 ? layout_and_allocate+0x3990/0x3990 ? rcu_read_lock_held_common+0xe/0xb0 ? rcu_read_lock_sched_held+0x62/0xe0 ? rcu_read_lock_bh_held+0xd0/0xd0 ? __vmalloc_node_range+0x46b/0x890 ? lock_release+0x5c8/0xba0 ? alloc_vm_area+0x120/0x120 ? selinux_kernel_module_from_file+0x2a5/0x300 ? __inode_security_revalidate+0xf0/0xf0 ? __do_sys_init_module+0x1db/0x260 __do_sys_init_module+0x1db/0x260 ? load_module+0x5260/0x5260 ? do_syscall_64+0x22/0x450 do_syscall_64+0xa5/0x450 entry_SYSCALL_64_after_hwframe+0x66/0xdb | ||||
| CVE-2023-53810 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: release crypto keyslot before reporting I/O complete Once all I/O using a blk_crypto_key has completed, filesystems can call blk_crypto_evict_key(). However, the block layer currently doesn't call blk_crypto_put_keyslot() until the request is being freed, which happens after upper layers have been told (via bio_endio()) the I/O has completed. This causes a race condition where blk_crypto_evict_key() can see 'slot_refs != 0' without there being an actual bug. This makes __blk_crypto_evict_key() hit the 'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without doing anything, eventually causing a use-after-free in blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only been seen when per-file keys are being used with fscrypt.) There are two options to fix this: either release the keyslot before bio_endio() is called on the request's last bio, or make __blk_crypto_evict_key() ignore slot_refs. Let's go with the first solution, since it preserves the ability to report bugs (via WARN_ON_ONCE) where a key is evicted while still in-use. | ||||
| CVE-2025-40018 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: Defer ip_vs_ftp unregister during netns cleanup On the netns cleanup path, __ip_vs_ftp_exit() may unregister ip_vs_ftp before connections with valid cp->app pointers are flushed, leading to a use-after-free. Fix this by introducing a global `exiting_module` flag, set to true in ip_vs_ftp_exit() before unregistering the pernet subsystem. In __ip_vs_ftp_exit(), skip ip_vs_ftp unregister if called during netns cleanup (when exiting_module is false) and defer it to __ip_vs_cleanup_batch(), which unregisters all apps after all connections are flushed. If called during module exit, unregister ip_vs_ftp immediately. | ||||
| CVE-2023-53808 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix memory leak in mwifiex_histogram_read() Always free the zeroed page on return from 'mwifiex_histogram_read()'. | ||||
| CVE-2023-53807 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider() Smatch detected this potential error pointer dereference clk_wzrd_register_divider(). If devm_clk_hw_register() fails then it sets "hw" to an error pointer and then dereferences it on the next line. Return the error directly instead. | ||||
| CVE-2023-54216 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, Fix using eswitch mapping in nic mode Cited patch is using the eswitch object mapping pool while in nic mode where it isn't initialized. This results in the trace below [0]. Fix that by using either nic or eswitch object mapping pool depending if eswitch is enabled or not. [0]: [ 826.446057] ================================================================== [ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233 [ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1 [ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 826.449785] Call Trace: [ 826.450052] <TASK> [ 826.450302] dump_stack_lvl+0x33/0x50 [ 826.450650] print_report+0xc2/0x610 [ 826.450998] ? __virt_addr_valid+0xb1/0x130 [ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.451935] kasan_report+0xae/0xe0 [ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.453368] ? __kmalloc_node+0x5a/0x120 [ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core] [ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core] [ 826.455011] ? mutex_unlock+0x80/0xd0 [ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core] [ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core] [ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core] [ 826.457636] ? __kasan_kmalloc+0x77/0x90 [ 826.458000] ? __kmalloc+0x57/0x120 [ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core] [ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0 [ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core] [ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core] [ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core] [ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core] [ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core] [ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0 [ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core] [ 826.463163] ? kasan_save_stack+0x2e/0x40 [ 826.463534] ? down_read+0x115/0x1b0 [ 826.463878] ? down_write_killable+0x110/0x110 [ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0 [ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core] [ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core] [ 826.465878] tc_setup_cb_add+0x112/0x250 [ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower] [ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower] [ 826.467212] fl_change+0x14e1/0x2030 [cls_flower] [ 826.467636] ? sock_def_readable+0x89/0x120 [ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.468509] ? kasan_unpoison+0x23/0x50 [ 826.468873] ? get_random_u16+0x180/0x180 [ 826.469244] ? __radix_tree_lookup+0x2b/0x130 [ 826.469640] ? fl_get+0x7b/0x140 [cls_flower] [ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower] [ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.471427] tc_new_tfilter+0x644/0x1050 [ 826.471795] ? tc_get_tfilter+0x860/0x860 [ 826.472170] ? __thaw_task+0x130/0x130 [ 826.472525] ? arch_stack_walk+0x98/0xf0 [ 826.472892] ? cap_capable+0x9f/0xd0 [ 826.473235] ? security_capable+0x47/0x60 [ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550 [ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.474383] ? __stack_depot_save+0x35/0x4c0 [ 826.474779] ? kasan_save_stack+0x2e/0x40 [ 826.475149] ? kasan_save_stack+0x1e/0x40 [ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.475939] ? task_work_add+0x77/0x1c0 [ 826.476305] netlink_rcv_skb+0xe0/0x210 ---truncated--- | ||||
| CVE-2023-53806 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: populate subvp cmd info only for the top pipe [Why] System restart observed while changing the display resolution to 8k with extended mode. Sytem restart was caused by a page fault. [How] When the driver populates subvp info it did it for both the pipes using vblank which caused an outof bounds array access causing the page fault. added checks to allow the top pipe only to fix this issue. | ||||
| CVE-2025-68763 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Correctly handle return of sg_nents_for_len The return value of sg_nents_for_len was assigned to an unsigned long in starfive_hash_digest, causing negative error codes to be converted to large positive integers. Add error checking for sg_nents_for_len and return immediately on failure to prevent potential buffer overflows. | ||||
| CVE-2025-68756 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock blk_mq_{add,del}_queue_tag_set() functions add and remove queues from tagset, the functions make sure that tagset and queues are marked as shared when two or more queues are attached to the same tagset. Initially a tagset starts as unshared and when the number of added queues reaches two, blk_mq_add_queue_tag_set() marks it as shared along with all the queues attached to it. When the number of attached queues drops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset and the remaining queues as unshared. Both functions need to freeze current queues in tagset before setting on unsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functions hold set->tag_list_lock mutex, which makes sense as we do not want queues to be added or deleted in the process. This used to work fine until commit 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset") made the nvme driver quiesce tagset instead of quiscing individual queues. blk_mq_quiesce_tagset() does the job and quiesce the queues in set->tag_list while holding set->tag_list_lock also. This results in deadlock between two threads with these stacktraces: __schedule+0x47c/0xbb0 ? timerqueue_add+0x66/0xb0 schedule+0x1c/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.constprop.0+0x271/0x600 blk_mq_quiesce_tagset+0x25/0xc0 nvme_dev_disable+0x9c/0x250 nvme_timeout+0x1fc/0x520 blk_mq_handle_expired+0x5c/0x90 bt_iter+0x7e/0x90 blk_mq_queue_tag_busy_iter+0x27e/0x550 ? __blk_mq_complete_request_remote+0x10/0x10 ? __blk_mq_complete_request_remote+0x10/0x10 ? __call_rcu_common.constprop.0+0x1c0/0x210 blk_mq_timeout_work+0x12d/0x170 process_one_work+0x12e/0x2d0 worker_thread+0x288/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 __schedule+0x47c/0xbb0 ? xas_find+0x161/0x1a0 schedule+0x1c/0xa0 blk_mq_freeze_queue_wait+0x3d/0x70 ? destroy_sched_domains_rcu+0x30/0x30 blk_mq_update_tag_set_shared+0x44/0x80 blk_mq_exit_queue+0x141/0x150 del_gendisk+0x25a/0x2d0 nvme_ns_remove+0xc9/0x170 nvme_remove_namespaces+0xc7/0x100 nvme_remove+0x62/0x150 pci_device_remove+0x23/0x60 device_release_driver_internal+0x159/0x200 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x112/0x1e0 vfs_write+0x2b1/0x3d0 ksys_write+0x4e/0xb0 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 The top stacktrace is showing nvme_timeout() called to handle nvme command timeout. timeout handler is trying to disable the controller and as a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq not to call queue callback handlers. The thread is stuck waiting for set->tag_list_lock as it tries to walk the queues in set->tag_list. The lock is held by the second thread in the bottom stack which is waiting for one of queues to be frozen. The queue usage counter will drop to zero after nvme_timeout() finishes, and this will not happen because the thread will wait for this mutex forever. Given that [un]quiescing queue is an operation that does not need to sleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of taking set->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCU safe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list) in blk_mq_del_queue_tag_set() because we can not re-initialize it while the list is being traversed under RCU. The deleted queue will not be added/deleted to/from a tagset and it will be freed in blk_free_queue() after the end of RCU grace period. | ||||
| CVE-2023-53804 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode() During unmount process of nilfs2, nothing holds nilfs_root structure after nilfs2 detaches its writer in nilfs_detach_log_writer(). However, since nilfs_evict_inode() uses nilfs_root for some cleanup operations, it may cause use-after-free read if inodes are left in "garbage_list" and released by nilfs_dispose_list() at the end of nilfs_detach_log_writer(). Fix this issue by modifying nilfs_evict_inode() to only clear inode without additional metadata changes that use nilfs_root if the file system is degraded to read-only or the writer is detached. | ||||
| CVE-2023-53799 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: api - Use work queue in crypto_destroy_instance The function crypto_drop_spawn expects to be called in process context. However, when an instance is unregistered while it still has active users, the last user may cause the instance to be freed in atomic context. Fix this by delaying the freeing to a work queue. | ||||
| CVE-2023-53798 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: Fix uninitialized number of lanes It is not possible to set the number of lanes when setting link modes using the legacy IOCTL ethtool interface. Since 'struct ethtool_link_ksettings' is not initialized in this path, drivers receive an uninitialized number of lanes in 'struct ethtool_link_ksettings::lanes'. When this information is later queried from drivers, it results in the ethtool code making decisions based on uninitialized memory, leading to the following KMSAN splat [1]. In practice, this most likely only happens with the tun driver that simply returns whatever it got in the set operation. As far as I can tell, this uninitialized memory is not leaked to user space thanks to the 'ethtool_ops->cap_link_lanes_supported' check in linkmodes_prepare_data(). Fix by initializing the structure in the IOCTL path. Did not find any more call sites that pass an uninitialized structure when calling 'ethtool_ops::set_link_ksettings()'. [1] BUG: KMSAN: uninit-value in ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] BUG: KMSAN: uninit-value in ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_get_link_ksettings+0x37/0x60 drivers/net/tun.c:3544 __ethtool_get_link_ksettings+0x17b/0x260 net/ethtool/ioctl.c:441 ethnl_set_linkmodes+0xee/0x19d0 net/ethtool/linkmodes.c:327 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_set_link_ksettings+0x37/0x60 drivers/net/tun.c:3553 ethtool_set_link_ksettings+0x600/0x690 net/ethtool/ioctl.c:609 __dev_ethtool net/ethtool/ioctl.c:3024 [inline] dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078 dev_ioctl+0xb07/0x1270 net/core/dev_ioctl.c:524 sock_do_ioctl+0x295/0x540 net/socket.c:1213 sock_i ---truncated--- | ||||
| CVE-2023-53796 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix information leak in f2fs_move_inline_dirents() When converting an inline directory to a regular one, f2fs is leaking uninitialized memory to disk because it doesn't initialize the entire directory block. Fix this by zero-initializing the block. This bug was introduced by commit 4ec17d688d74 ("f2fs: avoid unneeded initializing when converting inline dentry"), which didn't consider the security implications of leaking uninitialized memory to disk. This was found by running xfstest generic/435 on a KMSAN-enabled kernel. | ||||
| CVE-2023-53794 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix session state check in reconnect to avoid use-after-free issue Don't collect exiting session in smb2_reconnect_server(), because it will be released soon. Note that the exiting session will stay in server->smb_ses_list until it complete the cifs_free_ipc() and logoff() and then delete itself from the list. | ||||
| CVE-2023-53791 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md: fix warning for holder mismatch from export_rdev() Commit a1d767191096 ("md: use mddev->external to select holder in export_rdev()") fix the problem that 'claim_rdev' is used for blkdev_get_by_dev() while 'rdev' is used for blkdev_put(). However, if mddev->external is changed from 0 to 1, then 'rdev' is used for blkdev_get_by_dev() while 'claim_rdev' is used for blkdev_put(). And this problem can be reporduced reliably by following: New file: mdadm/tests/23rdev-lifetime devname=${dev0##*/} devt=`cat /sys/block/$devname/dev` pid="" runtime=2 clean_up_test() { pill -9 $pid echo clear > /sys/block/md0/md/array_state } trap 'clean_up_test' EXIT add_by_sysfs() { while true; do echo $devt > /sys/block/md0/md/new_dev done } remove_by_sysfs(){ while true; do echo remove > /sys/block/md0/md/dev-${devname}/state done } echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed" add_by_sysfs & pid="$pid $!" remove_by_sysfs & pid="$pid $!" sleep $runtime exit 0 Test cmd: ./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime Test result: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 960 at block/bdev.c:618 blkdev_put+0x27c/0x330 Modules linked in: multipath md_mod loop CPU: 0 PID: 960 Comm: test Not tainted 6.5.0-rc2-00121-g01e55c376936-dirty #50 RIP: 0010:blkdev_put+0x27c/0x330 Call Trace: <TASK> export_rdev.isra.23+0x50/0xa0 [md_mod] mddev_unlock+0x19d/0x300 [md_mod] rdev_attr_store+0xec/0x190 [md_mod] sysfs_kf_write+0x52/0x70 kernfs_fop_write_iter+0x19a/0x2a0 vfs_write+0x3b5/0x770 ksys_write+0x74/0x150 __x64_sys_write+0x22/0x30 do_syscall_64+0x40/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix the problem by recording if 'rdev' is used as holder. | ||||