Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
20035 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40353 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: mte: Do not warn if the page is already tagged in copy_highpage() The arm64 copy_highpage() assumes that the destination page is newly allocated and not MTE-tagged (PG_mte_tagged unset) and warns accordingly. However, following commit 060913999d7a ("mm: migrate: support poisoned recover from migrate folio"), folio_mc_copy() is called before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the copy will be done again to the same destination page. Since copy_highpage() already set the PG_mte_tagged flag, this second copy will warn. Replace the WARN_ON_ONCE(page already tagged) in the arm64 copy_highpage() with a comment. | ||||
| CVE-2023-53816 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix potential kgd_mem UAFs kgd_mem pointers returned by kfd_process_device_translate_handle are only guaranteed to be valid while p->mutex is held. As soon as the mutex is unlocked, another thread can free the BO. | ||||
| CVE-2025-40351 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix KMSAN uninit-value issue in hfsplus_delete_cat() The syzbot reported issue in hfsplus_delete_cat(): [ 70.682285][ T9333] ===================================================== [ 70.682943][ T9333] BUG: KMSAN: uninit-value in hfsplus_subfolders_dec+0x1d7/0x220 [ 70.683640][ T9333] hfsplus_subfolders_dec+0x1d7/0x220 [ 70.684141][ T9333] hfsplus_delete_cat+0x105d/0x12b0 [ 70.684621][ T9333] hfsplus_rmdir+0x13d/0x310 [ 70.685048][ T9333] vfs_rmdir+0x5ba/0x810 [ 70.685447][ T9333] do_rmdir+0x964/0xea0 [ 70.685833][ T9333] __x64_sys_rmdir+0x71/0xb0 [ 70.686260][ T9333] x64_sys_call+0xcd8/0x3cf0 [ 70.686695][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.687119][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.687646][ T9333] [ 70.687856][ T9333] Uninit was stored to memory at: [ 70.688311][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0 [ 70.688779][ T9333] hfsplus_create_cat+0x148e/0x1800 [ 70.689231][ T9333] hfsplus_mknod+0x27f/0x600 [ 70.689730][ T9333] hfsplus_mkdir+0x5a/0x70 [ 70.690146][ T9333] vfs_mkdir+0x483/0x7a0 [ 70.690545][ T9333] do_mkdirat+0x3f2/0xd30 [ 70.690944][ T9333] __x64_sys_mkdir+0x9a/0xf0 [ 70.691380][ T9333] x64_sys_call+0x2f89/0x3cf0 [ 70.691816][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.692229][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.692773][ T9333] [ 70.692990][ T9333] Uninit was stored to memory at: [ 70.693469][ T9333] hfsplus_subfolders_inc+0x1c2/0x1d0 [ 70.693960][ T9333] hfsplus_create_cat+0x148e/0x1800 [ 70.694438][ T9333] hfsplus_fill_super+0x21c1/0x2700 [ 70.694911][ T9333] mount_bdev+0x37b/0x530 [ 70.695320][ T9333] hfsplus_mount+0x4d/0x60 [ 70.695729][ T9333] legacy_get_tree+0x113/0x2c0 [ 70.696167][ T9333] vfs_get_tree+0xb3/0x5c0 [ 70.696588][ T9333] do_new_mount+0x73e/0x1630 [ 70.697013][ T9333] path_mount+0x6e3/0x1eb0 [ 70.697425][ T9333] __se_sys_mount+0x733/0x830 [ 70.697857][ T9333] __x64_sys_mount+0xe4/0x150 [ 70.698269][ T9333] x64_sys_call+0x2691/0x3cf0 [ 70.698704][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.699117][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.699730][ T9333] [ 70.699946][ T9333] Uninit was created at: [ 70.700378][ T9333] __alloc_pages_noprof+0x714/0xe60 [ 70.700843][ T9333] alloc_pages_mpol_noprof+0x2a2/0x9b0 [ 70.701331][ T9333] alloc_pages_noprof+0xf8/0x1f0 [ 70.701774][ T9333] allocate_slab+0x30e/0x1390 [ 70.702194][ T9333] ___slab_alloc+0x1049/0x33a0 [ 70.702635][ T9333] kmem_cache_alloc_lru_noprof+0x5ce/0xb20 [ 70.703153][ T9333] hfsplus_alloc_inode+0x5a/0xd0 [ 70.703598][ T9333] alloc_inode+0x82/0x490 [ 70.703984][ T9333] iget_locked+0x22e/0x1320 [ 70.704428][ T9333] hfsplus_iget+0x5c/0xba0 [ 70.704827][ T9333] hfsplus_btree_open+0x135/0x1dd0 [ 70.705291][ T9333] hfsplus_fill_super+0x1132/0x2700 [ 70.705776][ T9333] mount_bdev+0x37b/0x530 [ 70.706171][ T9333] hfsplus_mount+0x4d/0x60 [ 70.706579][ T9333] legacy_get_tree+0x113/0x2c0 [ 70.707019][ T9333] vfs_get_tree+0xb3/0x5c0 [ 70.707444][ T9333] do_new_mount+0x73e/0x1630 [ 70.707865][ T9333] path_mount+0x6e3/0x1eb0 [ 70.708270][ T9333] __se_sys_mount+0x733/0x830 [ 70.708711][ T9333] __x64_sys_mount+0xe4/0x150 [ 70.709158][ T9333] x64_sys_call+0x2691/0x3cf0 [ 70.709630][ T9333] do_syscall_64+0xd9/0x1d0 [ 70.710053][ T9333] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.710611][ T9333] [ 70.710842][ T9333] CPU: 3 UID: 0 PID: 9333 Comm: repro Not tainted 6.12.0-rc6-dirty #17 [ 70.711568][ T9333] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.712490][ T9333] ===================================================== [ 70.713085][ T9333] Disabling lock debugging due to kernel taint [ 70.713618][ T9333] Kernel panic - not syncing: kmsan.panic set ... [ 70.714159][ T9333] ---truncated--- | ||||
| CVE-2025-40195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mount: handle NULL values in mnt_ns_release() When calling in listmount() mnt_ns_release() may be passed a NULL pointer. Handle that case gracefully. | ||||
| CVE-2022-50880 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state() When peer delete failed in a disconnect operation, use-after-free detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k, and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed [21713.799968] ================================================================== [21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176] netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187] sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1 [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core] [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d ---truncated--- | ||||
| CVE-2022-50879 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: objtool: Fix SEGFAULT find_insn() will return NULL in case of failure. Check insn in order to avoid a kernel Oops for NULL pointer dereference. | ||||
| CVE-2025-40286 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix possible memory leak in smb2_read() Memory leak occurs when ksmbd_vfs_read() fails. Fix this by adding the missing kvfree(). | ||||
| CVE-2025-40192 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "ipmi: fix msg stack when IPMI is disconnected" This reverts commit c608966f3f9c2dca596967501d00753282b395fc. This patch has a subtle bug that can cause the IPMI driver to go into an infinite loop if the BMC misbehaves in a certain way. Apparently certain BMCs do misbehave this way because several reports have come in recently about this. | ||||
| CVE-2025-40185 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: ice_adapter: release xa entry on adapter allocation failure When ice_adapter_new() fails, the reserved XArray entry created by xa_insert() is not released. This causes subsequent insertions at the same index to return -EBUSY, potentially leading to NULL pointer dereferences. Reorder the operations as suggested by Przemek Kitszel: 1. Check if adapter already exists (xa_load) 2. Reserve the XArray slot (xa_reserve) 3. Allocate the adapter (ice_adapter_new) 4. Store the adapter (xa_store) | ||||
| CVE-2025-40265 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfat: fix missing sb_min_blocksize() return value checks When emulating an nvme device on qemu with both logical_block_size and physical_block_size set to 8 KiB, but without format, a kernel panic was triggered during the early boot stage while attempting to mount a vfat filesystem. [95553.682035] EXT4-fs (nvme0n1): unable to set blocksize [95553.684326] EXT4-fs (nvme0n1): unable to set blocksize [95553.686501] EXT4-fs (nvme0n1): unable to set blocksize [95553.696448] ISOFS: unsupported/invalid hardware sector size 8192 [95553.697117] ------------[ cut here ]------------ [95553.697567] kernel BUG at fs/buffer.c:1582! [95553.697984] Oops: invalid opcode: 0000 [#1] SMP NOPTI [95553.698602] CPU: 0 UID: 0 PID: 7212 Comm: mount Kdump: loaded Not tainted 6.18.0-rc2+ #38 PREEMPT(voluntary) [95553.699511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [95553.700534] RIP: 0010:folio_alloc_buffers+0x1bb/0x1c0 [95553.701018] Code: 48 8b 15 e8 93 18 02 65 48 89 35 e0 93 18 02 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc <0f> 0b 90 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f [95553.702648] RSP: 0018:ffffd1b0c676f990 EFLAGS: 00010246 [95553.703132] RAX: ffff8cfc4176d820 RBX: 0000000000508c48 RCX: 0000000000000001 [95553.703805] RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000000 [95553.704481] RBP: ffffd1b0c676f9c8 R08: 0000000000000000 R09: 0000000000000000 [95553.705148] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [95553.705816] R13: 0000000000002000 R14: fffff8bc8257e800 R15: 0000000000000000 [95553.706483] FS: 000072ee77315840(0000) GS:ffff8cfdd2c8d000(0000) knlGS:0000000000000000 [95553.707248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [95553.707782] CR2: 00007d8f2a9e5a20 CR3: 0000000039d0c006 CR4: 0000000000772ef0 [95553.708439] PKRU: 55555554 [95553.708734] Call Trace: [95553.709015] <TASK> [95553.709266] __getblk_slow+0xd2/0x230 [95553.709641] ? find_get_block_common+0x8b/0x530 [95553.710084] bdev_getblk+0x77/0xa0 [95553.710449] __bread_gfp+0x22/0x140 [95553.710810] fat_fill_super+0x23a/0xfc0 [95553.711216] ? __pfx_setup+0x10/0x10 [95553.711580] ? __pfx_vfat_fill_super+0x10/0x10 [95553.712014] vfat_fill_super+0x15/0x30 [95553.712401] get_tree_bdev_flags+0x141/0x1e0 [95553.712817] get_tree_bdev+0x10/0x20 [95553.713177] vfat_get_tree+0x15/0x20 [95553.713550] vfs_get_tree+0x2a/0x100 [95553.713910] vfs_cmd_create+0x62/0xf0 [95553.714273] __do_sys_fsconfig+0x4e7/0x660 [95553.714669] __x64_sys_fsconfig+0x20/0x40 [95553.715062] x64_sys_call+0x21ee/0x26a0 [95553.715453] do_syscall_64+0x80/0x670 [95553.715816] ? __fs_parse+0x65/0x1e0 [95553.716172] ? fat_parse_param+0x103/0x4b0 [95553.716587] ? vfs_parse_fs_param_source+0x21/0xa0 [95553.717034] ? __do_sys_fsconfig+0x3d9/0x660 [95553.717548] ? __x64_sys_fsconfig+0x20/0x40 [95553.717957] ? x64_sys_call+0x21ee/0x26a0 [95553.718360] ? do_syscall_64+0xb8/0x670 [95553.718734] ? __x64_sys_fsconfig+0x20/0x40 [95553.719141] ? x64_sys_call+0x21ee/0x26a0 [95553.719545] ? do_syscall_64+0xb8/0x670 [95553.719922] ? x64_sys_call+0x1405/0x26a0 [95553.720317] ? do_syscall_64+0xb8/0x670 [95553.720702] ? __x64_sys_close+0x3e/0x90 [95553.721080] ? x64_sys_call+0x1b5e/0x26a0 [95553.721478] ? do_syscall_64+0xb8/0x670 [95553.721841] ? irqentry_exit+0x43/0x50 [95553.722211] ? exc_page_fault+0x90/0x1b0 [95553.722681] entry_SYSCALL_64_after_hwframe+0x76/0x7e [95553.723166] RIP: 0033:0x72ee774f3afe [95553.723562] Code: 73 01 c3 48 8b 0d 0a 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 49 89 ca b8 af 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d da 32 0f 00 f7 d8 64 89 01 48 [95553.725188] RSP: 002b:00007ffe97148978 EFLAGS: 00000246 ORIG_RAX: 00000000000001af [95553.725892] RAX: ffffffffffffffda RBX: ---truncated--- | ||||
| CVE-2023-54244 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: Fix oops when removing custom query handlers When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi | ||||
| CVE-2025-40184 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix debug checking for np-guests using huge mappings When running with transparent huge pages and CONFIG_NVHE_EL2_DEBUG then the debug checking in assert_host_shared_guest() fails on the launch of an np-guest. This WARN_ON() causes a panic and generates the stack below. In __pkvm_host_relax_perms_guest() the debug checking assumes the mapping is a single page but it may be a block map. Update the checking so that the size is not checked and just assumes the correct size. While we're here make the same fix in __pkvm_host_mkyoung_guest(). Info: # lkvm run -k /share/arch/arm64/boot/Image -m 704 -c 8 --name guest-128 Info: Removed ghost socket file "/.lkvm//guest-128.sock". [ 1406.521757] kvm [141]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:1088! [ 1406.521804] kvm [141]: nVHE call trace: [ 1406.521828] kvm [141]: [<ffff8000811676b4>] __kvm_nvhe_hyp_panic+0xb4/0xe8 [ 1406.521946] kvm [141]: [<ffff80008116d12c>] __kvm_nvhe_assert_host_shared_guest+0xb0/0x10c [ 1406.522049] kvm [141]: [<ffff80008116f068>] __kvm_nvhe___pkvm_host_relax_perms_guest+0x48/0x104 [ 1406.522157] kvm [141]: [<ffff800081169df8>] __kvm_nvhe_handle___pkvm_host_relax_perms_guest+0x64/0x7c [ 1406.522250] kvm [141]: [<ffff800081169f0c>] __kvm_nvhe_handle_trap+0x8c/0x1a8 [ 1406.522333] kvm [141]: [<ffff8000811680fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4 [ 1406.522454] kvm [141]: ---[ end nVHE call trace ]--- [ 1406.522477] kvm [141]: Hyp Offset: 0xfffece8013600000 [ 1406.522554] Kernel panic - not syncing: HYP panic: [ 1406.522554] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800 [ 1406.522554] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000 [ 1406.522554] VCPU:0000000000000000 [ 1406.523337] CPU: 3 UID: 0 PID: 141 Comm: kvm-vcpu-0 Not tainted 6.16.0-rc7 #97 PREEMPT [ 1406.523485] Hardware name: FVP Base RevC (DT) [ 1406.523566] Call trace: [ 1406.523629] show_stack+0x18/0x24 (C) [ 1406.523753] dump_stack_lvl+0xd4/0x108 [ 1406.523899] dump_stack+0x18/0x24 [ 1406.524040] panic+0x3d8/0x448 [ 1406.524184] nvhe_hyp_panic_handler+0x10c/0x23c [ 1406.524325] kvm_handle_guest_abort+0x68c/0x109c [ 1406.524500] handle_exit+0x60/0x17c [ 1406.524630] kvm_arch_vcpu_ioctl_run+0x2e0/0x8c0 [ 1406.524794] kvm_vcpu_ioctl+0x1a8/0x9cc [ 1406.524919] __arm64_sys_ioctl+0xac/0x104 [ 1406.525067] invoke_syscall+0x48/0x10c [ 1406.525189] el0_svc_common.constprop.0+0x40/0xe0 [ 1406.525322] do_el0_svc+0x1c/0x28 [ 1406.525441] el0_svc+0x38/0x120 [ 1406.525588] el0t_64_sync_handler+0x10c/0x138 [ 1406.525750] el0t_64_sync+0x1ac/0x1b0 [ 1406.525876] SMP: stopping secondary CPUs [ 1406.525965] Kernel Offset: disabled [ 1406.526032] CPU features: 0x0000,00000080,8e134ca1,9446773f [ 1406.526130] Memory Limit: none [ 1406.959099] ---[ end Kernel panic - not syncing: HYP panic: [ 1406.959099] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800 [ 1406.959099] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000 [ 1406.959099] VCPU:0000000000000000 ] | ||||
| CVE-2025-40354 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: increase max link count and fix link->enc NULL pointer access [why] 1.) dc->links[MAX_LINKS] array size smaller than actual requested. max_connector + max_dpia + 4 virtual = 14. increase from 12 to 14. 2.) hw_init() access null LINK_ENC for dpia non display_endpoint. (cherry picked from commit d7f5a61e1b04ed87b008c8d327649d184dc5bb45) | ||||
| CVE-2025-68194 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: imon: make send_packet() more robust syzbot is reporting that imon has three problems which result in hung tasks due to forever holding device lock [1]. First problem is that when usb_rx_callback_intf0() once got -EPROTO error after ictx->dev_present_intf0 became true, usb_rx_callback_intf0() resubmits urb after printk(), and resubmitted urb causes usb_rx_callback_intf0() to again get -EPROTO error. This results in printk() flooding (RCU stalls). Alan Stern commented [2] that In theory it's okay to resubmit _if_ the driver has a robust error-recovery scheme (such as giving up after some fixed limit on the number of errors or after some fixed time has elapsed, perhaps with a time delay to prevent a flood of errors). Most drivers don't bother to do this; they simply give up right away. This makes them more vulnerable to short-term noise interference during USB transfers, but in reality such interference is quite rare. There's nothing really wrong with giving up right away. but imon has a poor error-recovery scheme which just retries forever; this behavior should be fixed. Since I'm not sure whether it is safe for imon users to give up upon any error code, this patch takes care of only union of error codes chosen from modules in drivers/media/rc/ directory which handle -EPROTO error (i.e. ir_toy, mceusb and igorplugusb). Second problem is that when usb_rx_callback_intf0() once got -EPROTO error before ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() always resubmits urb due to commit 8791d63af0cf ("[media] imon: don't wedge hardware after early callbacks"). Move the ictx->dev_present_intf0 test introduced by commit 6f6b90c9231a ("[media] imon: don't parse scancodes until intf configured") to immediately before imon_incoming_packet(), or the first problem explained above happens without printk() flooding (i.e. hung task). Third problem is that when usb_rx_callback_intf0() is not called for some reason (e.g. flaky hardware; the reproducer for this problem sometimes prevents usb_rx_callback_intf0() from being called), wait_for_completion_interruptible() in send_packet() never returns (i.e. hung task). As a workaround for such situation, change send_packet() to wait for completion with timeout of 10 seconds. | ||||
| CVE-2023-54180 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: handle case when repair happens with dev-replace [BUG] There is a bug report that a BUG_ON() in btrfs_repair_io_failure() (originally repair_io_failure() in v6.0 kernel) got triggered when replacing a unreliable disk: BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3 kernel BUG at fs/btrfs/extent_io.c:2380! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2 Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs] Call Trace: <TASK> clean_io_failure+0x14d/0x180 [btrfs] end_bio_extent_readpage+0x412/0x6e0 [btrfs] ? __switch_to+0x106/0x420 process_one_work+0x1c7/0x380 worker_thread+0x4d/0x380 ? rescuer_thread+0x3a0/0x3a0 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 [CAUSE] Before the BUG_ON(), we got some read errors from the replace target first, note the mirror number (3, which is beyond RAID1 duplication, thus it's read from the replace target device). Then at the BUG_ON() location, we are trying to writeback the repaired sectors back the failed device. The check looks like this: ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical, &map_length, &bioc, mirror_num); if (ret) goto out_counter_dec; BUG_ON(mirror_num != bioc->mirror_num); But inside btrfs_map_block(), we can modify bioc->mirror_num especially for dev-replace: if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 && !need_full_stripe(op) && dev_replace->tgtdev != NULL) { ret = get_extra_mirror_from_replace(fs_info, logical, *length, dev_replace->srcdev->devid, &mirror_num, &physical_to_patch_in_first_stripe); patch_the_first_stripe_for_dev_replace = 1; } Thus if we're repairing the replace target device, we're going to trigger that BUG_ON(). But in reality, the read failure from the replace target device may be that, our replace hasn't reached the range we're reading, thus we're reading garbage, but with replace running, the range would be properly filled later. Thus in that case, we don't need to do anything but let the replace routine to handle it. [FIX] Instead of a BUG_ON(), just skip the repair if we're repairing the device replace target device. | ||||
| CVE-2025-68818 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path" This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9. The commit being reverted added code to __qla2x00_abort_all_cmds() to call sp->done() without holding a spinlock. But unlike the older code below it, this new code failed to check sp->cmd_type and just assumed TYPE_SRB, which results in a jump to an invalid pointer in target-mode with TYPE_TGT_CMD: qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success 0000000009f7a79b qla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h. qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no buffer qla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event 0x8002 occurred qla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery - ha=0000000058183fda. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor instruction fetch in kernel mode PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1 Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206 RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000 RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0 RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045 R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40 R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400 FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x4d/0x8b ? page_fault_oops+0x91/0x180 ? trace_buffer_unlock_commit_regs+0x38/0x1a0 ? exc_page_fault+0x391/0x5e0 ? asm_exc_page_fault+0x22/0x30 __qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst] qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst] qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst] qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst] qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst] kthread+0xa8/0xd0 </TASK> Then commit 4475afa2646d ("scsi: qla2xxx: Complete command early within lock") added the spinlock back, because not having the lock caused a race and a crash. But qla2x00_abort_srb() in the switch below already checks for qla2x00_chip_is_down() and handles it the same way, so the code above the switch is now redundant and still buggy in target-mode. Remove it. | ||||
| CVE-2023-7324 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix possible addl_desc_ptr out-of-bounds accesses Sanitize possible addl_desc_ptr out-of-bounds accesses in ses_enclosure_data_process(). | ||||
| CVE-2025-40178 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pid: Add a judgment for ns null in pid_nr_ns __task_pid_nr_ns ns = task_active_pid_ns(current); pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns); if (pid && ns->level <= pid->level) { Sometimes null is returned for task_active_pid_ns. Then it will trigger kernel panic in pid_nr_ns. For example: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 39-bit VAs, pgdp=00000002175aa000 [0000000000000058] pgd=08000002175ab003, p4d=08000002175ab003, pud=08000002175ab003, pmd=08000002175be003, pte=0000000000000000 pstate: 834000c5 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : __task_pid_nr_ns+0x74/0xd0 lr : __task_pid_nr_ns+0x24/0xd0 sp : ffffffc08001bd10 x29: ffffffc08001bd10 x28: ffffffd4422b2000 x27: 0000000000000001 x26: ffffffd442821168 x25: ffffffd442821000 x24: 00000f89492eab31 x23: 00000000000000c0 x22: ffffff806f5693c0 x21: ffffff806f5693c0 x20: 0000000000000001 x19: 0000000000000000 x18: 0000000000000000 x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 00000000023a1adc x14: 0000000000000003 x13: 00000000007ef6d8 x12: 001167c391c78800 x11: 00ffffffffffffff x10: 0000000000000000 x9 : 0000000000000001 x8 : ffffff80816fa3c0 x7 : 0000000000000000 x6 : 49534d702d535449 x5 : ffffffc080c4c2c0 x4 : ffffffd43ee128c8 x3 : ffffffd43ee124dc x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffffff806f5693c0 Call trace: __task_pid_nr_ns+0x74/0xd0 ... __handle_irq_event_percpu+0xd4/0x284 handle_irq_event+0x48/0xb0 handle_fasteoi_irq+0x160/0x2d8 generic_handle_domain_irq+0x44/0x60 gic_handle_irq+0x4c/0x114 call_on_irq_stack+0x3c/0x74 do_interrupt_handler+0x4c/0x84 el1_interrupt+0x34/0x58 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x68/0x6c account_kernel_stack+0x60/0x144 exit_task_stack_account+0x1c/0x80 do_exit+0x7e4/0xaf8 ... get_signal+0x7bc/0x8d8 do_notify_resume+0x128/0x828 el0_svc+0x6c/0x70 el0t_64_sync_handler+0x68/0xbc el0t_64_sync+0x1a8/0x1ac Code: 35fffe54 911a02a8 f9400108 b4000128 (b9405a69) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt | ||||
| CVE-2023-54164 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix iso_conn related locking and validity issues sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations that check/update sk_state and access conn should hold lock_sock, otherwise they can race. The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock, which is how it is in connect/disconnect_cfm -> iso_conn_del -> iso_chan_del. Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock around updating sk_state and conn. iso_conn_del must not occur during iso_connect_cis/bis, as it frees the iso_conn. Hold hdev->lock longer to prevent that. This should not reintroduce the issue fixed in commit 241f51931c35 ("Bluetooth: ISO: Avoid circular locking dependency"), since the we acquire locks in order. We retain the fix in iso_sock_connect to release lock_sock before iso_connect_* acquires hdev->lock. Similarly for commit 6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency"). We retain the fix in iso_conn_ready to not acquire iso_conn_lock before lock_sock. iso_conn_add shall return iso_conn with valid hcon. Make it so also when reusing an old CIS connection waiting for disconnect timeout (see __iso_sock_close where conn->hcon is set to NULL). Trace with iso_conn_del after iso_chan_add in iso_connect_cis: =============================================================== iso_sock_create:771: sock 00000000be9b69b7 iso_sock_init:693: sk 000000004dff667e iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1 iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_connect:875: sk 000000004dff667e iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e __iso_chan_add:214: conn 00000000daf8625e iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12 iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16 iso_sock_clear_timer:117: sock 000000004dff667e state 3 <Note: sk_state is BT_BOUND (3), so iso_connect_cis is still running at this point> iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16 hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535 hci_conn_unlink:1102: hci0: hcon 000000007b65d182 hci_chan_list_flush:2780: hcon 000000007b65d182 iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1 __iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7 <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it must be that iso_chan_del occurred between iso_chan_add and end of iso_connect_cis.> BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth =============================================================== Trace with iso_conn_del before iso_chan_add in iso_connect_cis: =============================================================== iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504 hci_dev_put:1487: hci0 orig refcnt 21 hci_event_packet:7607: hci0: e ---truncated--- | ||||
| CVE-2025-40038 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Skip fastpath emulation on VM-Exit if next RIP isn't valid Skip the WRMSR and HLT fastpaths in SVM's VM-Exit handler if the next RIP isn't valid, e.g. because KVM is running with nrips=false. SVM must decode and emulate to skip the instruction if the CPU doesn't provide the next RIP, and getting the instruction bytes to decode requires reading guest memory. Reading guest memory through the emulator can fault, i.e. can sleep, which is disallowed since the fastpath handlers run with IRQs disabled. BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:106 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 32611, name: qemu preempt_count: 1, expected: 0 INFO: lockdep is turned off. irq event stamp: 30580 hardirqs last enabled at (30579): [<ffffffffc08b2527>] vcpu_run+0x1787/0x1db0 [kvm] hardirqs last disabled at (30580): [<ffffffffb4f62e32>] __schedule+0x1e2/0xed0 softirqs last enabled at (30570): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210 softirqs last disabled at (30568): [<ffffffffb4247a64>] fpu_swap_kvm_fpstate+0x44/0x210 CPU: 298 UID: 0 PID: 32611 Comm: qemu Tainted: G U 6.16.0-smp--e6c618b51cfe-sleep #782 NONE Tainted: [U]=USER Hardware name: Google Astoria-Turin/astoria, BIOS 0.20241223.2-0 01/17/2025 Call Trace: <TASK> dump_stack_lvl+0x7d/0xb0 __might_resched+0x271/0x290 __might_fault+0x28/0x80 kvm_vcpu_read_guest_page+0x8d/0xc0 [kvm] kvm_fetch_guest_virt+0x92/0xc0 [kvm] __do_insn_fetch_bytes+0xf3/0x1e0 [kvm] x86_decode_insn+0xd1/0x1010 [kvm] x86_emulate_instruction+0x105/0x810 [kvm] __svm_skip_emulated_instruction+0xc4/0x140 [kvm_amd] handle_fastpath_invd+0xc4/0x1a0 [kvm] vcpu_run+0x11a1/0x1db0 [kvm] kvm_arch_vcpu_ioctl_run+0x5cc/0x730 [kvm] kvm_vcpu_ioctl+0x578/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x8a/0x2c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f479d57a94b </TASK> Note, this is essentially a reapply of commit 5c30e8101e8d ("KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"), but with different justification (KVM now grabs SRCU when skipping the instruction for other reasons). | ||||