Total
7497 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-38920 | 1 Open Robotics | 2 Nav2 Humble, Ros2 | 2026-04-15 | 9.1 Critical |
| Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a use-after-free via the nav2_amcl process. This vulnerability is triggerd via remotely sending a request for change the value of dynamic-parameter`/amcl max_beams` . | ||||
| CVE-2025-23115 | 2026-04-15 | N/A | ||
| A Use After Free vulnerability on UniFi Protect Cameras could allow a Remote Code Execution (RCE) by a malicious actor with access to UniFi Protect Cameras management network. | ||||
| CVE-2025-24898 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 4.8 Medium |
| rust-openssl is a set of OpenSSL bindings for the Rust programming language. In affected versions `ssl::select_next_proto` can return a slice pointing into the `server` argument's buffer but with a lifetime bound to the `client` argument. In situations where the `sever` buffer's lifetime is shorter than the `client` buffer's, this can cause a use after free. This could cause the server to crash or to return arbitrary memory contents to the client. The crate`openssl` version 0.10.70 fixes the signature of `ssl::select_next_proto` to properly constrain the output buffer's lifetime to that of both input buffers. Users are advised to upgrade. In standard usage of `ssl::select_next_proto` in the callback passed to `SslContextBuilder::set_alpn_select_callback`, code is only affected if the `server` buffer is constructed *within* the callback. | ||||
| CVE-2025-6972 | 2026-04-15 | 7.8 High | ||
| Use After Free vulnerability exists in the CATPRODUCT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted CATPRODUCT file. | ||||
| CVE-2024-3187 | 1 Embedthis | 1 Goahead | 2026-04-15 | 5.9 Medium |
| This issue tracks two CWE-416 Use After Free (UAF) and one CWE-415 Double Free vulnerabilities in Goahead versions <= 6.0.0. These are caused by JST values not being nulled when freed during parsing of JST templates. If the ME_GOAHEAD_JAVASCRIPT flag is enabled, a remote attacker with the privileges to modify JavaScript template (JST) files could exploit this by providing malicious templates. This may lead to memory corruption, potentially causing a Denial of Service (DoS) or, in rare cases, code execution, though the latter is highly context-dependent. | ||||
| CVE-2024-47899 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2025-0622 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-04-15 | 6.4 Medium |
| A flaw was found in command/gpg. In some scenarios, hooks created by loaded modules are not removed when the related module is unloaded. This flaw allows an attacker to force grub2 to call the hooks once the module that registered it was unloaded, leading to a use-after-free vulnerability. If correctly exploited, this vulnerability may result in arbitrary code execution, eventually allowing the attacker to bypass secure boot protections. | ||||
| CVE-2024-38375 | 1 Fastly | 1 Js-compute | 2026-04-15 | 5.3 Medium |
| @fastly/js-compute is a JavaScript SDK and runtime for building Fastly Compute applications. The implementation of several functions were determined to include a use-after-free bug. This bug could allow for unintended data loss if the result of the preceding functions were sent anywhere else, and often results in a guest trap causing services to return a 500. This bug has been fixed in version 3.16.0 of the `@fastly/js-compute` package. | ||||
| CVE-2023-5447 | 2026-04-15 | 5.5 Medium | ||
| Missing lock check in SynHsaService may create a use-after-free condition which causes abnormal termination of the service, resulting in denial of service for the Synaptics Hardware Support App. | ||||
| CVE-2025-6973 | 2026-04-15 | 7.8 High | ||
| Use After Free vulnerability exists in the JT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted JT file. | ||||
| CVE-2025-48945 | 2026-04-15 | 5.5 Medium | ||
| pycares is a Python module which provides an interface to c-ares. c-ares is a C library that performs DNS requests and name resolutions asynchronously. Prior to version 4.9.0, pycares is vulnerable to a use-after-free condition that occurs when a Channel object is garbage collected while DNS queries are still pending. This results in a fatal Python error and interpreter crash. The vulnerability has been fixed in pycares 4.9.0 by implementing a safe channel destruction mechanism. | ||||
| CVE-2024-36353 | 2026-04-15 | 6.5 Medium | ||
| Insufficient clearing of GPU global memory could allow a malicious process running on the same GPU to read left over memory values potentially leading to loss of confidentiality. | ||||
| CVE-2025-59734 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2. When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0. This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false. A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again. Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer. Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb. GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata. This issue can be triggered just by probing whether a file has the sanm format. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-48798 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-04-15 | 7.3 High |
| A flaw was found in GIMP when processing XCF image files. If a user opens one of these image files that has been specially crafted by an attacker, GIMP can be tricked into making serious memory errors, potentially leading to crashes and causing use-after-free issues. | ||||
| CVE-2024-12837 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to corrupt kernel heap memory. | ||||
| CVE-2024-1848 | 2026-04-15 | 7.8 High | ||
| Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in SOLIDWORKS Desktop on Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, DWG, DXF, IPT, JT, SAT, SLDDRW, SLDPRT, STL, STP, X_B or X_T file. | ||||
| CVE-2025-11234 | 1 Redhat | 4 Enterprise Linux, Openshift, Rhel E4s and 1 more | 2026-04-15 | 7.5 High |
| A flaw was found in QEMU. If the QIOChannelWebsock object is freed while it is waiting to complete a handshake, a GSource is leaked. This can lead to the callback firing later on and triggering a use-after-free in the use of the channel. This can be abused by a malicious client with network access to the VNC WebSocket port to cause a denial of service during the WebSocket handshake prior to the VNC client authentication. | ||||
| CVE-2025-1706 | 2026-04-15 | 7.5 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2024-47891 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2025-14569 | 1 Ggml | 1 Whisper.cpp | 2026-04-15 | 5.3 Medium |
| A vulnerability was detected in ggml-org whisper.cpp up to 1.8.2. Affected is the function read_audio_data of the file /whisper.cpp/examples/common-whisper.cpp. The manipulation results in use after free. The attack requires a local approach. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||