Total
7497 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-47891 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2024-46971 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct GPU system calls to read and write freed physical memory from the GPU. | ||||
| CVE-2025-15062 | 1 Trimble | 1 Sketchup | 2026-04-15 | N/A |
| Trimble SketchUp SKP File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Trimble SketchUp. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SKP files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27769. | ||||
| CVE-2024-4418 | 1 Redhat | 3 Advanced Virtualization, Enterprise Linux, Rhel Eus | 2026-04-15 | 6.2 Medium |
| A race condition leading to a stack use-after-free flaw was found in libvirt. Due to a bad assumption in the virNetClientIOEventLoop() method, the `data` pointer to a stack-allocated virNetClientIOEventData structure ended up being used in the virNetClientIOEventFD callback while the data pointer's stack frame was concurrently being "freed" when returning from virNetClientIOEventLoop(). The 'virtproxyd' daemon can be used to trigger requests. If libvirt is configured with fine-grained access control, this issue, in theory, allows a user to escape their otherwise limited access. This flaw allows a local, unprivileged user to access virtproxyd without authenticating. Remote users would need to authenticate before they could access it. | ||||
| CVE-2024-46973 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2025-5991 | 2026-04-15 | 5.6 Medium | ||
| There is a "Use After Free" vulnerability in Qt's QHttp2ProtocolHandler in the QtNetwork module. This only affects HTTP/2 handling, HTTP handling is not affected by this at all. This happens due to a race condition between how QHttp2Stream uploads the body of a POST request and the simultaneous handling of HTTP error responses. This issue only affects Qt 6.9.0 and has been fixed for Qt 6.9.1. | ||||
| CVE-2024-4741 | 2 Openssl, Redhat | 2 Openssl, Enterprise Linux | 2026-04-15 | 7.5 High |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSL_free_buffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications. The SSL_free_buffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use. The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSL_free_buffers will succeed even though a record has only been partially processed and the buffer is still in use. The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSL_free_buffers will succeed even though the buffer is still in use. While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. | ||||
| CVE-2025-40001 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work item completes before the mvs_info is deallocated. This bug was found by static analysis. | ||||
| CVE-2025-55118 | 1 Bmc | 1 Control-m/agent | 2026-04-15 | 8.9 High |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured. The issue occurs in the following cases: * Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n"; * Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" | ||||
| CVE-2025-6971 | 2026-04-15 | 7.8 High | ||
| Use After Free vulnerability exists in the CATPRODUCT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted CATPRODUCT file. | ||||
| CVE-2025-31498 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2026-04-15 | 7.0 High |
| c-ares is an asynchronous resolver library. From 1.32.3 through 1.34.4, there is a use-after-free in read_answers() when process_answer() may re-enqueue a query either due to a DNS Cookie Failure or when the upstream server does not properly support EDNS, or possibly on TCP queries if the remote closed the connection immediately after a response. If there was an issue trying to put that new transaction on the wire, it would close the connection handle, but read_answers() was still expecting the connection handle to be available to possibly dequeue other responses. In theory a remote attacker might be able to trigger this by flooding the target with ICMP UNREACHABLE packets if they also control the upstream nameserver and can return a result with one of those conditions, this has been untested. Otherwise only a local attacker might be able to change system behavior to make send()/write() return a failure condition. This vulnerability is fixed in 1.34.5. | ||||
| CVE-2025-48798 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-04-15 | 7.3 High |
| A flaw was found in GIMP when processing XCF image files. If a user opens one of these image files that has been specially crafted by an attacker, GIMP can be tricked into making serious memory errors, potentially leading to crashes and causing use-after-free issues. | ||||
| CVE-2025-59734 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| It is possible to cause an use-after-free write in SANM decoding with a carefully crafted animation using subversion <2. When a STOR chunk is present, a subsequent FOBJ chunk will be saved in ctx->stored_frame. Stored frames can later be referenced by FTCH chunks. For files using subversion < 2, the undecoded frame is stored, and decoded again when the FTCH chunks are parsed. However, in process_frame_obj if the frame has an invalid size, there’s an early return, with a value of 0. This causes the code in decode_frame to still store the raw frame buffer into ctx->stored_frame. Leaving ctx->has_dimensions set to false. A subsequent chunk with type FTCH would call process_ftch and decode that frame obj again, adding to the top/left values and calling process_frame_obj again. Given that we never set ctx->have_dimensions before, this time we set the dimensions, calling init_buffers, which can reallocate the buffer in ctx->stored_frame, freeing the previous one. However, the GetByteContext object gb still holds a reference to the old buffer. Finally, when the code tries to decode the frame, codecs that accept a GetByteContext as a parameter will trigger a use-after-free read when using gb. GetByteContext is only used for reading bytes, so at most one could read invalid data. There are no heap allocations between the free and when the object is accessed. However, upon returning to process_ftch, the code restores the original values for top/left in stored_frame, writing 4 bytes to the freed data at offset 6, potentially corrupting the allocator’s metadata. This issue can be triggered just by probing whether a file has the sanm format. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2023-51779 | 2 Linux, Redhat | 6 Kernel, Enterprise Linux, Rhel Aus and 3 more | 2026-04-15 | 7 High |
| bt_sock_recvmsg in net/bluetooth/af_bluetooth.c in the Linux kernel through 6.6.8 has a use-after-free because of a bt_sock_ioctl race condition. | ||||
| CVE-2023-49676 | 2026-04-15 | 5.5 Medium | ||
| An unauthenticated local attacker may trick a user to open corrupted project files to crash the system due to use after free vulnerability. | ||||
| CVE-2024-47899 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2025-50518 | 1 Libcoap | 1 Libcoap | 2026-04-15 | 9.8 Critical |
| A use-after-free vulnerability exists in the coap_delete_pdu_lkd function within coap_pdu.c of the libcoap library. This issue occurs due to improper handling of memory after the freeing of a PDU object, leading to potential memory corruption or the possibility of executing arbitrary code. NOTE: this is disputed by the Supplier because it only occurs when an application uses libcoap incorrectly. | ||||
| CVE-2024-1848 | 2026-04-15 | 7.8 High | ||
| Heap-based Buffer Overflow, Memory Corruption, Out-Of-Bounds Read, Out-Of-Bounds Write, Stack-based Buffer Overflow, Type Confusion, Uninitialized Variable, Use-After-Free vulnerabilities exist in the file reading procedure in SOLIDWORKS Desktop on Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted CATPART, DWG, DXF, IPT, JT, SAT, SLDDRW, SLDPRT, STL, STP, X_B or X_T file. | ||||
| CVE-2025-23281 | 1 Nvidia | 1 Gpu Display Driver | 2026-04-15 | 7 High |
| NVIDIA GPU Display Driver for Windows contains a vulnerability where an attacker with local unprivileged access that can win a race condition might be able to trigger a use-after-free error. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, or information disclosure. | ||||
| CVE-2024-47898 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||