Total
6256 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53391 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr nfs4_decode_mp_ds_addr() decodes the r_netid and r_addr opaques of a netaddr4 from a GETDEVICEINFO multipath-DS body, then immediately calls strrchr(buf, '.') to locate the port separator. Both decodes use xdr_stream_decode_string_dup(), and the current code checks only "nlen < 0" / "rlen < 0" before dereferencing the returned string. When the on-wire opaque has length zero, xdr_stream_decode_opaque_inline() returns 0 and xdr_stream_decode_string_dup() falls through to its "*str = NULL; return ret" tail, leaving buf NULL with a return value of 0. The "< 0" check does not catch this, and the next line is strrchr(NULL, '.'), a kernel NULL pointer dereference reachable from any pNFS-flexfile client mounted against a malicious or compromised metadata server. Reject the zero-length cases explicitly so the decoder fails with -EBADMSG (treated as a malformed GETDEVICEINFO body) instead of panicking the client. | ||||
| CVE-2026-53383 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject non-VALID session in compound request branch smb2_check_user_session() takes a shortcut for any operation that is not the first in a COMPOUND request: it reuses work->sess (the session bound by the first operation) and validates only the SessionId, then returns "valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation value) skips even the id comparison. The standalone path (ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does enforce the VALID state; the compound branch bypasses all of it. A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL (->user is assigned later, by ntlm_authenticate()). Used as operation 1 of a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX, \\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and reaches ksmbd_ipc_tree_connect_request(), which dereferences user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704) -> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd worker for all clients. Reject any non-first compound operation that lands on a session which is not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session, but it is never carried as a non-first compound operation, so multi-leg authentication is unaffected by this check. | ||||
| CVE-2026-53403 | 1 Linux | 1 Linux Kernel | 2026-07-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var info->var, a framebuffer's current mode, is expected to have a matching entry in info->modelist. var_to_display() relies on this and treats a failed fb_match_mode() as "This should not happen". fb_set_var() keeps it true by adding the mode to the list on every change, and do_register_framebuffer() does the same at registration. store_modes() replaces the modelist from userspace. fb_new_modelist() validates the new modes but does not check that info->var still has a match. It relies on fbcon_new_modelist() to re-point consoles, but that only handles consoles mapped to the framebuffer. With fbcon unbound there are none, so info->var is left describing a mode that is no longer in the list. A later console takeover runs var_to_display(), where fb_match_mode() returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode. Keep the current mode in the list in fb_new_modelist(), the same way fb_set_var() does. | ||||
| CVE-2026-64040 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix error return when vfs_mkdir() fails When vfs_mkdir() fails, the error code is not extracted from the returned error pointer. This causes mkdir_error to be reached with ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a proper error pointer. Fix this by extracting the error code from the error pointer when vfs_mkdir() fails. | ||||
| CVE-2026-63990 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: refuse to enslave CAN devices syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c. | ||||
| CVE-2026-63811 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: read COW data with the original inode during atomic write When updating an atomic-write file, f2fs_write_begin() may read the previously written data back from the COW inode: prepare_atomic_write_begin() locates the block in the COW inode and sets use_cow, and the read bio is then built with the COW inode: f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode, ...); and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption (STEP_DECRYPT) for the bio based on that inode via fscrypt_inode_uses_fs_layer_crypto(). However, the folio being filled belongs to the original inode (folio->mapping->host == inode), and the data stored in the COW block was encrypted (or left as plaintext) using the original inode's context, not the COW inode's -- see f2fs_encrypt_one_page(), which keys off fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise operates on folio->mapping->host. The COW inode is created as a tmpfile in the parent directory and inherits its encryption policy from there. With test_dummy_encryption the newly created COW inode gets the dummy policy and becomes encrypted, while a pre-existing regular file -- created before the policy applied, e.g. already present in the on-disk image -- stays unencrypted. The read path then sets STEP_DECRYPT based on the encrypted COW inode and calls fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted original inode) has a NULL ->i_crypt_info, dereferencing it: Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310 Workqueue: f2fs_post_read_wq f2fs_post_read_work Call Trace: fscrypt_decrypt_bio+0x1eb/0x340 f2fs_post_read_work+0xba/0x140 process_one_work+0x91c/0x1a40 worker_thread+0x677/0xe90 kthread+0x2bc/0x3a0 The COW inode is only needed to locate the on-disk block, and that block address is already resolved into @blkaddr by prepare_atomic_write_begin() via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads from that physical @blkaddr directly, so the inode argument only selects the post-read crypto context, not which block is fetched. Reading with @inode therefore returns the same (latest, not-yet-committed) COW data, while making both the fs-layer decryption decision and the inline crypto path use the correct (original inode's) key. With the COW inode no longer used at the read site, the use_cow flag has no remaining consumer; drop it from f2fs_write_begin() and prepare_atomic_write_begin(). | ||||
| CVE-2026-53385 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write A KASAN null-ptr-deref was observed in vcs_notifier(): BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130 Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {} The issue is a race condition in vcs_write(). When the console_lock is temporarily dropped (to copy data from userspace), the vc_data pointer obtained from vcs_vc() may become stale. After re-acquiring the lock, vcs_vc() is called again to re-validate the pointer. If the vc has been deallocated in the meantime, vcs_vc() returns NULL, and the while loop breaks (with written > 0). However, after the loop, vcs_scr_updated(vc) is still called with the now-NULL vc pointer, leading to a null pointer dereference in the notifier chain (vcs_notifier dereferences param->vc). Fix this by adding a NULL check for vc before calling vcs_scr_updated(). | ||||
| CVE-2026-53382 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si syzbot reported a general protection fault in vidtv_psi_ts_psi_write_into [1]. vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does not check for this before dereferencing the returned pointer to access the continuity counter. This leads to a general protection fault when accessing a near-NULL address. The root cause is that vidtv_mux_pid_ctx_init() does not check the return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs. If the allocation fails, the PID context is never created, but init returns success. The subsequent vidtv_mux_push_si() call then gets NULL from vidtv_mux_get_pid_ctx() and crashes. Fix both the root cause (add error check in vidtv_mux_pid_ctx_init for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for all vidtv_mux_get_pid_ctx() calls. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: events vidtv_mux_tick RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197 Call Trace: <TASK> vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline] vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231 vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196 vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408 | ||||
| CVE-2026-53355 | 1 Linux | 1 Linux Kernel | 2026-07-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: rds: clear i_sends on setup unwind The RDS IB connection teardown path is written so it can run during partial startup and on repeated shutdown attempts. It uses NULL pointers to distinguish resources that are still owned from resources that have already been released. When rds_ib_setup_qp() fails after allocating i_sends but before allocating i_recvs, the sends_out path frees i_sends without clearing the pointer. A later shutdown pass can still treat that stale pointer as a live send ring allocation. Clear i_sends after vfree() in the error unwind path so the existing shutdown logic continues to use the correct ownership state. | ||||
| CVE-2026-50315 | 1 Microsoft | 7 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 4 more | 2026-07-16 | 7.8 High |
| Null pointer dereference in Windows Image Acquisition allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-46092 | 1 Linux | 1 Linux Kernel | 2026-07-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: check for PCI upstream bridge existence pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. | ||||
| CVE-2026-52865 | 1 F5 | 1 Nginx Ingress Controller | 2026-07-15 | 6.5 Medium |
| When NGINX Ingress Controller processes Ingress or TransportServer resources, an authenticated, remote attacker with permission to create or modify Ingress or TransportServer resources can cause the NGINX Ingress Controller process to terminate. Impact: The NGINX Ingress Controller control plane process terminates and enters a persistent crash loop while the malformed Ingress or TransportServer resource remains in the cluster. This vulnerability allows a remote, authenticated attacker with at least Ingress or TransportServer resource write access to cause a denial-of-service (DoS) on the NGINX Ingress Controller system. There is no data plane exposure; this is a control plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-50673 | 1 Microsoft | 18 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 15 more | 2026-07-15 | 7.8 High |
| Null pointer dereference in Windows Kernel allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-60109 | 1 Zeek | 1 Zeek | 2026-07-14 | 7.5 High |
| Zeek before 8.0.9 contains a null pointer dereference vulnerability in its Kerberos protocol analyzer that allows unauthenticated remote attackers to crash the sensor by sending a crafted KRB_ERROR message with error-code 25 (KDC_ERR_PREAUTH_REQUIRED) containing a PA-DATA element with padata-type 2, 3, 11, or 19. Attackers can exploit a parser and analyzer state mismatch where proc_padata() dereferences an uninitialized pa_data_element field selected by the wrong parsing arm, triggering a crash via a single UDP or TCP packet to port 88 without any credentials or prior authentication. | ||||
| CVE-2026-50366 | 1 Microsoft | 18 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 15 more | 2026-07-14 | 6.5 Medium |
| Null pointer dereference in Active Directory Domain Services allows an authorized attacker to deny service over a network. | ||||
| CVE-2026-32854 | 3 Libvnc Project, Libvncserver, Libvncserver Project | 3 Libvncserver, Libvncserver, Libvncserver | 2026-07-14 | 7.5 High |
| LibVNCServer versions 0.9.15 and prior (fixed in commit dc78dee) contain null pointer dereference vulnerabilities in the HTTP proxy handlers within httpProcessInput() in httpd.c that allow remote attackers to cause a denial of service by sending specially crafted HTTP requests. Attackers can exploit missing validation of strchr() return values in the CONNECT and GET proxy handling paths to trigger null pointer dereferences and crash the server when httpd and proxy features are enabled. | ||||
| CVE-2026-10659 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | 4.7 Medium |
| The Dhara flash translation layer disk driver (drivers/disk/ftl_dhara.c) implemented the dhara_nand_ callbacks so that, on a flash error, the error code was written unconditionally through the caller-supplied dhara_error_t err pointer (e.g. *err = DHARA_E_ECC in dhara_nand_read, and similar in dhara_nand_erase/prog/copy). The upstream Dhara library calls these callbacks with err == NULL along its journal-resume binary search: find_last_checkblock() invokes find_checkblock(j, mid, &found, NULL), which forwards the NULL pointer into dhara_nand_read(). This path runs during disk_ftl_access_init() -> dhara_map_resume() whenever the FTL disk is mounted/initialised. If a flash read error (uncorrectable ECC, bad block, controller error) occurs on one of the probed checkpoint pages, the driver dereferences and writes to NULL, faulting the kernel (denial of service). The trigger is conditioned on the NAND medium content/health, which can be influenced by media wear, induced faults, or a corrupted/crafted on-flash image. The fix routes all error assignments through the library's NULL-safe dhara_set_error() helper. Affects Zephyr v4.4.0, where the driver was introduced. | ||||
| CVE-2026-10656 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | 4.6 Medium |
| The MAX32xxx USB device controller driver (drivers/usb/udc/udc_max32.c, compatible adi_max32_usbhs) dereferenced an endpoint buffer in its OUT and IN transfer-completion handlers without checking it for NULL. udc_event_xfer_out_done() called net_buf_add(buf, ep_request->actlen) immediately after buf = udc_buf_get(ep_cfg), where udc_buf_get() returns NULL when the endpoint FIFO is empty. A transfer-completion event is queued from interrupt context and processed asynchronously by the driver thread; between queuing and processing, the endpoint FIFO can be drained by host-controlled control flow — in particular udc_setup_received() drains the EP0 OUT/IN FIFOs whenever a new SETUP packet arrives, and dequeue/disable/purge paths drain it likewise. A USB host that aborts an in-flight EP0 control transfer with a new SETUP packet (legal USB behavior) can therefore cause a stale XFER_OUT_DONE event to be processed against an empty FIFO, producing net_buf_add(NULL, ...), a near-NULL pointer dereference that faults and crashes the device. No authentication is required; the attacker is the USB host the device is connected to (physical bus access). Impact is denial of service (device crash). The defect was introduced when the MAX32 UDC driver was added and shipped in Zephyr v4.4.0. The fix adds NULL-buffer checks that return early with UDC_EVT_ERROR/-ENOBUFS in both the OUT-done and IN-done handlers. | ||||
| CVE-2026-10648 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | 6.2 Medium |
| mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool (CONFIG_MCUMGR_TRANSPORT_NETBUF_COUNT, default 4), which returns NULL when the pool is exhausted. In default builds the __ASSERT_NO_MSG in net_buf_reset is a no-op, so net_buf_simple_reset writes through the NULL pointer (buf->len = 0; buf->data = buf->__buf), causing a fault/crash. The fragment data reaches this code from attacker-controlled bytes on the MCUmgr serial/UART/shell-console transports (smp_uart.c, smp_raw_uart.c, smp_shell.c), and a fresh buffer is allocated at the start of essentially every new packet. An attacker on the serial/console link can flood the transport to drive the 4-entry buffer pool to exhaustion and induce the NULL dereference, crashing the device (denial of service). The defect was introduced after the original MCUmgr rework and shipped in Zephyr v4.4.0. The fix moves the NULL check ahead of net_buf_reset. | ||||
| CVE-2026-10593 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | 6.5 Medium |
| The Zephyr Bluetooth LE Audio Basic Audio Profile (BAP) unicast client mishandles peer-supplied ASE state notifications. In unicast_client_ep_qos_state() (subsys/bluetooth/audio/bap_unicast_client.c), the handler writes attacker-controlled QoS fields (interval, framing, phy, sdu, rtn, latency, pd) through the stream->qos pointer with only a stream != NULL guard. stream->qos is NULL for any stream that has been codec-configured via bt_bap_stream_config() but not yet added to a unicast group (it is set only by unicast_group_add_stream()). A malicious or buggy remote ASCS server, to which the local device is connected as a BAP unicast client, can send a GATT notification announcing the ASE has entered the QoS Configured state while the local endpoint is still in the Codec Configured state — a transition the dispatcher explicitly permits — during that window, causing a write through a NULL pointer and a crash (denial of service). The data written is itself remote-controlled. The defect shipped in v4.3.0 and v4.4.0 (and earlier). The fix re-points all BAP QoS storage to the always-valid embedded ep->qos struct, eliminating the NULL dereference. | ||||