Filtered by vendor Redhat
Subscriptions
Filtered by product Openstack
Subscriptions
Total
731 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-45803 | 3 Fedoraproject, Python, Redhat | 8 Fedora, Urllib3, Enterprise Linux and 5 more | 2025-11-03 | 4.2 Medium |
| urllib3 is a user-friendly HTTP client library for Python. urllib3 previously wouldn't remove the HTTP request body when an HTTP redirect response using status 301, 302, or 303 after the request had its method changed from one that could accept a request body (like `POST`) to `GET` as is required by HTTP RFCs. Although this behavior is not specified in the section for redirects, it can be inferred by piecing together information from different sections and we have observed the behavior in other major HTTP client implementations like curl and web browsers. Because the vulnerability requires a previously trusted service to become compromised in order to have an impact on confidentiality we believe the exploitability of this vulnerability is low. Additionally, many users aren't putting sensitive data in HTTP request bodies, if this is the case then this vulnerability isn't exploitable. Both of the following conditions must be true to be affected by this vulnerability: 1. Using urllib3 and submitting sensitive information in the HTTP request body (such as form data or JSON) and 2. The origin service is compromised and starts redirecting using 301, 302, or 303 to a malicious peer or the redirected-to service becomes compromised. This issue has been addressed in versions 1.26.18 and 2.0.7 and users are advised to update to resolve this issue. Users unable to update should disable redirects for services that aren't expecting to respond with redirects with `redirects=False` and disable automatic redirects with `redirects=False` and handle 301, 302, and 303 redirects manually by stripping the HTTP request body. | ||||
| CVE-2023-43804 | 4 Debian, Fedoraproject, Python and 1 more | 12 Debian Linux, Fedora, Urllib3 and 9 more | 2025-11-03 | 5.9 Medium |
| urllib3 is a user-friendly HTTP client library for Python. urllib3 doesn't treat the `Cookie` HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a `Cookie` header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly. This issue has been patched in urllib3 version 1.26.17 or 2.0.5. | ||||
| CVE-2023-41040 | 2 Gitpython Project, Redhat | 5 Gitpython, Ansible Automation Platform, Openstack and 2 more | 2025-11-03 | 4 Medium |
| GitPython is a python library used to interact with Git repositories. In order to resolve some git references, GitPython reads files from the `.git` directory, in some places the name of the file being read is provided by the user, GitPython doesn't check if this file is located outside the `.git` directory. This allows an attacker to make GitPython read any file from the system. This vulnerability is present in https://github.com/gitpython-developers/GitPython/blob/1c8310d7cae144f74a671cbe17e51f63a830adbf/git/refs/symbolic.py#L174-L175. That code joins the base directory with a user given string without checking if the final path is located outside the base directory. This vulnerability cannot be used to read the contents of files but could in theory be used to trigger a denial of service for the program. This issue has been addressed in version 3.1.37. | ||||
| CVE-2024-56326 | 2 Palletsprojects, Redhat | 15 Jinja, Ansible Automation Platform, Discovery and 12 more | 2025-11-03 | 7.8 High |
| Jinja is an extensible templating engine. Prior to 3.1.5, An oversight in how the Jinja sandboxed environment detects calls to str.format allows an attacker that controls the content of a template to execute arbitrary Python code. To exploit the vulnerability, an attacker needs to control the content of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates. Jinja's sandbox does catch calls to str.format and ensures they don't escape the sandbox. However, it's possible to store a reference to a malicious string's format method, then pass that to a filter that calls it. No such filters are built-in to Jinja, but could be present through custom filters in an application. After the fix, such indirect calls are also handled by the sandbox. This vulnerability is fixed in 3.1.5. | ||||
| CVE-2022-30631 | 2 Golang, Redhat | 21 Go, Acm, Advanced Cluster Security and 18 more | 2025-10-20 | 7.5 High |
| Uncontrolled recursion in Reader.Read in compress/gzip before Go 1.17.12 and Go 1.18.4 allows an attacker to cause a panic due to stack exhaustion via an archive containing a large number of concatenated 0-length compressed files. | ||||
| CVE-2025-21614 | 2 Go-git Project, Redhat | 8 Go-git, Advanced Cluster Security, Enterprise Linux and 5 more | 2025-09-30 | 7.5 High |
| go-git is a highly extensible git implementation library written in pure Go. A denial of service (DoS) vulnerability was discovered in go-git versions prior to v5.13. This vulnerability allows an attacker to perform denial of service attacks by providing specially crafted responses from a Git server which triggers resource exhaustion in go-git clients. Users running versions of go-git from v4 and above are recommended to upgrade to v5.13 in order to mitigate this vulnerability. | ||||
| CVE-2024-56201 | 2 Palletsprojects, Redhat | 13 Jinja, Ansible Automation Platform, Discovery and 10 more | 2025-09-22 | 8.8 High |
| Jinja is an extensible templating engine. In versions on the 3.x branch prior to 3.1.5, a bug in the Jinja compiler allows an attacker that controls both the content and filename of a template to execute arbitrary Python code, regardless of if Jinja's sandbox is used. To exploit the vulnerability, an attacker needs to control both the filename and the contents of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates where the template author can also choose the template filename. This vulnerability is fixed in 3.1.5. | ||||
| CVE-2023-1932 | 2 Hibernate, Redhat | 24 Hibernate-validator, A Mq Clients, Amq Broker and 21 more | 2025-06-24 | 6.1 Medium |
| A flaw was found in hibernate-validator's 'isValid' method in the org.hibernate.validator.internal.constraintvalidators.hv.SafeHtmlValidator class, which can be bypassed by omitting the tag ending in a less-than character. Browsers may render an invalid html, allowing HTML injection or Cross-Site-Scripting (XSS) attacks. | ||||
| CVE-2022-37026 | 2 Erlang, Redhat | 2 Erlang\/otp, Openstack | 2025-05-27 | 9.8 Critical |
| In Erlang/OTP before 23.3.4.15, 24.x before 24.3.4.2, and 25.x before 25.0.2, there is a Client Authentication Bypass in certain client-certification situations for SSL, TLS, and DTLS. | ||||
| CVE-2022-44020 | 3 Fedoraproject, Opendev, Redhat | 4 Fedora, Sushy-tools, Virtualbmc and 1 more | 2025-05-07 | 5.5 Medium |
| An issue was discovered in OpenStack Sushy-Tools through 0.21.0 and VirtualBMC through 2.2.2. Changing the boot device configuration with these packages removes password protection from the managed libvirt XML domain. NOTE: this only affects an "unsupported, production-like configuration." | ||||
| CVE-2022-38060 | 2 Openstack, Redhat | 2 Kolla, Openstack | 2025-05-07 | 8.8 High |
| A privilege escalation vulnerability exists in the sudo functionality of OpenStack Kolla git master 05194e7618. A misconfiguration in /etc/sudoers within a container can lead to increased privileges. | ||||
| CVE-2022-41723 | 2 Golang, Redhat | 22 Go, Hpack, Http2 and 19 more | 2025-05-05 | 7.5 High |
| A maliciously crafted HTTP/2 stream could cause excessive CPU consumption in the HPACK decoder, sufficient to cause a denial of service from a small number of small requests. | ||||
| CVE-2020-35498 | 4 Debian, Fedoraproject, Openvswitch and 1 more | 5 Debian Linux, Fedora, Openvswitch and 2 more | 2025-04-23 | 7.5 High |
| A vulnerability was found in openvswitch. A limitation in the implementation of userspace packet parsing can allow a malicious user to send a specially crafted packet causing the resulting megaflow in the kernel to be too wide, potentially causing a denial of service. The highest threat from this vulnerability is to system availability. | ||||
| CVE-2022-21712 | 4 Debian, Fedoraproject, Redhat and 1 more | 4 Debian Linux, Fedora, Openstack and 1 more | 2025-04-23 | 7.5 High |
| twisted is an event-driven networking engine written in Python. In affected versions twisted exposes cookies and authorization headers when following cross-origin redirects. This issue is present in the `twited.web.RedirectAgent` and `twisted.web. BrowserLikeRedirectAgent` functions. Users are advised to upgrade. There are no known workarounds. | ||||
| CVE-2022-21698 | 4 Fedoraproject, Prometheus, Rdo Project and 1 more | 17 Extra Packages For Enterprise Linux, Fedora, Client Golang and 14 more | 2025-04-23 | 7.5 High |
| client_golang is the instrumentation library for Go applications in Prometheus, and the promhttp package in client_golang provides tooling around HTTP servers and clients. In client_golang prior to version 1.11.1, HTTP server is susceptible to a Denial of Service through unbounded cardinality, and potential memory exhaustion, when handling requests with non-standard HTTP methods. In order to be affected, an instrumented software must use any of `promhttp.InstrumentHandler*` middleware except `RequestsInFlight`; not filter any specific methods (e.g GET) before middleware; pass metric with `method` label name to our middleware; and not have any firewall/LB/proxy that filters away requests with unknown `method`. client_golang version 1.11.1 contains a patch for this issue. Several workarounds are available, including removing the `method` label name from counter/gauge used in the InstrumentHandler; turning off affected promhttp handlers; adding custom middleware before promhttp handler that will sanitize the request method given by Go http.Request; and using a reverse proxy or web application firewall, configured to only allow a limited set of methods. | ||||
| CVE-2022-24761 | 3 Agendaless, Debian, Redhat | 3 Waitress, Debian Linux, Openstack | 2025-04-23 | 7.5 High |
| Waitress is a Web Server Gateway Interface server for Python 2 and 3. When using Waitress versions 2.1.0 and prior behind a proxy that does not properly validate the incoming HTTP request matches the RFC7230 standard, Waitress and the frontend proxy may disagree on where one request starts and where it ends. This would allow requests to be smuggled via the front-end proxy to waitress and later behavior. There are two classes of vulnerability that may lead to request smuggling that are addressed by this advisory: The use of Python's `int()` to parse strings into integers, leading to `+10` to be parsed as `10`, or `0x01` to be parsed as `1`, where as the standard specifies that the string should contain only digits or hex digits; and Waitress does not support chunk extensions, however it was discarding them without validating that they did not contain illegal characters. This vulnerability has been patched in Waitress 2.1.1. A workaround is available. When deploying a proxy in front of waitress, turning on any and all functionality to make sure that the request matches the RFC7230 standard. Certain proxy servers may not have this functionality though and users are encouraged to upgrade to the latest version of waitress instead. | ||||
| CVE-2022-24801 | 5 Debian, Fedoraproject, Oracle and 2 more | 6 Debian Linux, Fedora, Zfs Storage Appliance Kit and 3 more | 2025-04-23 | 8.1 High |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to version 22.4.0rc1, the Twisted Web HTTP 1.1 server, located in the `twisted.web.http` module, parsed several HTTP request constructs more leniently than permitted by RFC 7230. This non-conformant parsing can lead to desync if requests pass through multiple HTTP parsers, potentially resulting in HTTP request smuggling. Users who may be affected use Twisted Web's HTTP 1.1 server and/or proxy and also pass requests through a different HTTP server and/or proxy. The Twisted Web client is not affected. The HTTP 2.0 server uses a different parser, so it is not affected. The issue has been addressed in Twisted 22.4.0rc1. Two workarounds are available: Ensure any vulnerabilities in upstream proxies have been addressed, such as by upgrading them; or filter malformed requests by other means, such as configuration of an upstream proxy. | ||||
| CVE-2022-31117 | 3 Fedoraproject, Redhat, Ultrajson Project | 3 Fedora, Openstack, Ultrajson | 2025-04-23 | 5.9 Medium |
| UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. In versions prior to 5.4.0 an error occurring while reallocating a buffer for string decoding can cause the buffer to get freed twice. Due to how UltraJSON uses the internal decoder, this double free is impossible to trigger from Python. This issue has been resolved in version 5.4.0 and all users should upgrade to UltraJSON 5.4.0. There are no known workarounds for this issue. | ||||
| CVE-2022-21716 | 5 Debian, Fedoraproject, Oracle and 2 more | 6 Debian Linux, Fedora, Http Server and 3 more | 2025-04-22 | 7.5 High |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 22.2.0, Twisted SSH client and server implement is able to accept an infinite amount of data for the peer's SSH version identifier. This ends up with a buffer using all the available memory. The attach is a simple as `nc -rv localhost 22 < /dev/zero`. A patch is available in version 22.2.0. There are currently no known workarounds. | ||||
| CVE-2022-31116 | 3 Fedoraproject, Redhat, Ultrajson Project | 3 Fedora, Openstack, Ultrajson | 2025-04-22 | 7.5 High |
| UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. Affected versions were found to improperly decode certain characters. JSON strings that contain escaped surrogate characters not part of a proper surrogate pair were decoded incorrectly. Besides corrupting strings, this allowed for potential key confusion and value overwriting in dictionaries. All users parsing JSON from untrusted sources are vulnerable. From version 5.4.0, UltraJSON decodes lone surrogates in the same way as the standard library's `json` module does, preserving them in the parsed output. Users are advised to upgrade. There are no known workarounds for this issue. | ||||