Filtered by vendor Linux
Subscriptions
Total
20126 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53328 | 1 Linux | 1 Linux Kernel | 2026-07-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task() A WARN fires when systemd's user manager writes "+cpu +memory +pids" to its own subtree_control while a sched_ext scheduler is loaded: WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0 scx_cgroup_move_task+0xa8/0xb0 sched_move_task+0x134/0x290 cpu_cgroup_attach+0x39/0x70 cgroup_migrate_execute+0x37d/0x450 cgroup_update_dfl_csses+0x1e3/0x270 cgroup_subtree_control_write+0x3e7/0x440 scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu cgroup changes. It can still be NULL when scx_cgroup_move_task() runs, through this sequence: Step Result --------------------------------- ---------------------------------- 1. cpu enabled on cgroup G cpu css = A 2. cpu toggled off then on for G A killed, B created (same cgroup) 3. an exiting task keeps A alive migration skips it, A now stale 4. +memory migrates G stale A vs current B pulls cpu in 5. cpu attach runs for all tasks hits a live, cpu-unchanged task 6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN The mismatch is that scx_cgroup_can_attach() keys on cgroup identity while migration drives the move on css identity, so a NULL cgrp_moving_from here is a legitimate css-only migration, not a missing prep. The call is already gated on cgrp_moving_from, so just drop the warning. ops.cgroup_prep_move() and ops.cgroup_move() stay paired. | ||||
| CVE-2026-53340 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix clock and pinctrl state inconsistency in runtime PM In i2c_imx_runtime_suspend(), the clock is disabled before switching the pinctrl state to sleep. If pinctrl_pm_select_sleep_state() fails, the runtime suspend is aborted but the clock remains disabled, causing a system crash when the hardware is subsequently accessed. Fix this by switching the pinctrl state before disabling the clock so that a pinctrl failure leaves the clock enabled and the hardware accessible. In i2c_imx_runtime_resume(), restore the pinctrl state back to sleep if clk_enable() fails to keep the consistent. | ||||
| CVE-2026-53354 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Mitigate TLBI errata on various Arm CPUs A number of CPUs developed by Arm suffer from errata whereby a broadcast TLBI;DSB sequence may complete before the global observation of writes which are translated by an affected TLB entry. These errata ONLY affect the completion of memory accesses which have been translated by an invalidated TLB entry, and these errata DO NOT affect the actual invalidation of TLB entries. TLB entries are removed correctly. This issue has been assigned CVE ID CVE-2025-10263. To mitigate this issue, Arm recommends that software follows any affected TLBI;DSB sequence with an additional TLBI;DSB, which will ensure that all memory write effects affected by the first TLBI have been globally observed. The additional TLBI can use any operation that is broadcast to affected CPUs, and the additional DSB can use any option that is sufficient to complete the additional TLBI. The ARM64_WORKAROUND_REPEAT_TLBI workaround is sufficient to mitigate the issue. Enable this workaround for affected CPUs, and update the silicon errata documentation accordingly. Note that due to the manner in which Arm develops IP and tracks errata, some CPUs share a common erratum number. | ||||
| CVE-2026-53355 | 1 Linux | 1 Linux Kernel | 2026-07-02 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: rds: clear i_sends on setup unwind The RDS IB connection teardown path is written so it can run during partial startup and on repeated shutdown attempts. It uses NULL pointers to distinguish resources that are still owned from resources that have already been released. When rds_ib_setup_qp() fails after allocating i_sends but before allocating i_recvs, the sends_out path frees i_sends without clearing the pointer. A later shutdown pass can still treat that stale pointer as a live send ring allocation. Clear i_sends after vfree() in the error unwind path so the existing shutdown logic continues to use the correct ownership state. | ||||
| CVE-2026-53345 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying When marking a page dirty, complain about not having a running/loaded vCPU if and only if the VM is still alive, i.e. its refcount is non-zero. This will allow fixing a memory leak for x86 SEV-ES guests without hitting what is effectively a false positive on the WARN. For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page across an exit to userspace, and typically unmaps the page on the next KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM needs to unmap the page when the vCPU is destroyed, which in turn triggers the WARN about not having a running vCPU. Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN, as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons; suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But loading a vCPU during destruction is gross (ideally nVMX code would be cleaned up), risks complicating the SEV-ES code (KVM would need to ensure the temporarily load()+put() only runs when the vCPU isn't already loaded), and is ultimately pointless. The motivation for the WARN is to guard against KVM dirtying guest memory without pushing the corresponding GFN to the active vCPU's dirty ring, e.g. to ensure userspace doesn't miss a dirty page. But for the VM's refcount to reach zero, there can't be _any_ userspace mappings to the dirty ring, as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if userspace had a valid mapping for the dirty ring, then the vCPU file and thus the owning VM would still be alive. And so since userspace can't possibly reach the dirty ring, whether or not KVM technically "misses" a push to the dirty ring is irrelevant. | ||||
| CVE-2026-53349 | 1 Linux | 1 Linux Kernel | 2026-07-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: destroy stale expectfn expectations on unregister NAT helpers such as nf_nat_h323 store a raw pointer to module text in exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister() only unlinks the callback descriptor and never walks the expectation table, so an expectation pending at module removal survives with a dangling exp->expectfn into freed module text. When the expected connection arrives, init_conntrack() invokes exp->expectfn(), now a stale pointer into the unloaded module. Reproduced on a KASAN build by loading the H.323 helpers, creating a Q.931 expectation, unloading nf_nat_h323, then connecting to the expected port: Oops: int3: 0000 [#1] SMP KASAN NOPTI RIP: 0010:0xffffffffa06102d1 init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862) nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049) ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223) nf_hook_slow (net/netfilter/core.c:619) __ip_local_out (net/ipv4/ip_output.c:120) __tcp_transmit_skb (net/ipv4/tcp_output.c:1715) tcp_connect (net/ipv4/tcp_output.c:4374) tcp_v4_connect (net/ipv4/tcp_ipv4.c:345) __sys_connect (net/socket.c:2167) Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323] Reaching the dangling state requires CAP_SYS_MODULE in the initial user namespace to remove a NAT helper that still has live expectations, so this is a robustness fix; leaving an expectation pointing at freed text is wrong regardless. Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and drops every expectation whose ->expectfn matches the descriptor being torn down. Call it from each NAT helper's exit path after the existing RCU grace period, so no expectation outlives the code it points at and no extra synchronize_rcu() is introduced. With the fix, the same reproducer runs to completion without the Oops. | ||||
| CVE-2026-53353 | 1 Linux | 1 Linux Kernel | 2026-07-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hsr: Remove WARN_ONCE() in hsr_addr_is_self(). syzbot reported the warning [0] in hsr_addr_is_self(), whose assumption is simply wrong. hsr->self_node is cleared in hsr_del_self_node(), which is called from hsr_dellink(). Since dev->rtnl_link_ops->dellink() is called before unregister_netdevice_many(), there is a window when user can find the device but without hsr->self_node. Let's remove WARN_ONCE() in hsr_addr_is_self(). [0]: HSR: No self node WARNING: net/hsr/hsr_framereg.c:39 at hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39, CPU#0: syz.4.16848/17220 Modules linked in: CPU: 0 UID: 0 PID: 17220 Comm: syz.4.16848 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 RIP: 0010:hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39 Code: 33 2f 41 0f b7 dd 89 ee 09 de 31 ff e8 c8 b4 c6 f6 09 dd 74 54 e8 0f b0 c6 f6 31 ed eb 53 e8 06 b0 c6 f6 48 8d 3d 2f 50 9c 04 <67> 48 0f b9 3a 31 ed eb 42 e8 c1 13 1f 00 89 c5 31 ff 89 c6 e8 96 RSP: 0018:ffffc900041c70e0 EFLAGS: 00010283 RAX: ffffffff8afdc6ca RBX: ffffffff8afdc4e6 RCX: 0000000000080000 RDX: ffffc90010493000 RSI: 0000000000000948 RDI: ffffffff8f9a1700 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc900041c71e8 R11: fffff52000838e3f R12: dffffc0000000000 R13: ffff888041f9e3c0 R14: ffff888086ee3802 R15: 0000000000000000 FS: 00007f6fe985d6c0(0000) GS:ffff888126176000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f80bd437dac CR3: 0000000025096000 CR4: 00000000003526f0 DR0: ffffffffffffffff DR1: 00000000000001f8 DR2: 0000000000000002 DR3: ffffffffefffff15 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> check_local_dest net/hsr/hsr_forward.c:592 [inline] fill_frame_info net/hsr/hsr_forward.c:728 [inline] hsr_forward_skb+0xa11/0x2a80 net/hsr/hsr_forward.c:739 hsr_dev_xmit+0x253/0x370 net/hsr/hsr_device.c:236 __netdev_start_xmit include/linux/netdevice.h:5368 [inline] netdev_start_xmit include/linux/netdevice.h:5377 [inline] xmit_one net/core/dev.c:3888 [inline] dev_hard_start_xmit+0x2df/0x860 net/core/dev.c:3904 __dev_queue_xmit+0x1428/0x3900 net/core/dev.c:4870 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xcec/0x10b0 net/ipv4/ip_output.c:237 ip_send_skb net/ipv4/ip_output.c:1510 [inline] ip_push_pending_frames+0x8b/0x110 net/ipv4/ip_output.c:1530 raw_sendmsg+0x1547/0x1a50 net/ipv4/raw.c:659 sock_sendmsg_nosec net/socket.c:787 [inline] __sock_sendmsg net/socket.c:802 [inline] ____sys_sendmsg+0x7da/0x9c0 net/socket.c:2698 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2752 __sys_sendmsg net/socket.c:2784 [inline] __do_sys_sendmsg net/socket.c:2789 [inline] __se_sys_sendmsg net/socket.c:2787 [inline] __x64_sys_sendmsg+0x1c3/0x2a0 net/socket.c:2787 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f6feb62ce59 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6fe985d028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6feb8a6090 RCX: 00007f6feb62ce59 RDX: 0000000000000000 RSI: 0000200000000000 RDI: 0000000000000004 RBP: 00007f6feb6c2d6f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f6feb8a6128 R14: 00007f6feb8a6090 R15: 00007ffcf01cc488 </TASK> | ||||
| CVE-2026-53330 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval() [Why & How] The aux_rd_interval array in struct dc_lttpr_caps is declared with MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset parameter passed to dp_get_eq_aux_rd_interval() can be as large as MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD. This leads to an out-of-bounds read of aux_rd_interval[7] when offset is 8. Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to accommodate the full range of valid repeater counts defined by the DP spec. (cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04) | ||||
| CVE-2026-53337 | 1 Linux | 1 Linux Kernel | 2026-07-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL pointer dereference in bond_do_ioctl() In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which can return NULL if the requested interface name does not exist. However, the subsequent slave_dbg() call is placed before the NULL check: slave_dev = __dev_get_by_name(net, ifr->ifr_slave); slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here if (!slave_dev) return -ENODEV; The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt, (slave_dev)->name, ...) which unconditionally dereferences slave_dev->name before the NULL check is performed. This results in a NULL pointer dereference kernel oops when a user calls bonding ioctl (e.g. SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave interface name. This is reachable from userspace via the bonding ioctl interface with CAP_NET_ADMIN capability, making it a potential local denial-of-service vector. Fix by moving the slave_dbg() call after the NULL check. | ||||
| CVE-2026-53339 | 1 Linux | 1 Linux Kernel | 2026-07-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: qcom-cci: Fix NULL pointer dereference in cci_remove() On all modern platforms Qualcomm CCI controller provides two I2C masters, and on particular boards only one I2C master may be initialized, and in such cases the device unbinding or driver removal causes a NULL pointer dereference, because cci_halt() is called for all two I2C masters, but a completion is initialized only for the single enabled master: % rmmod i2c-qcom-cci Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 <snip> Call trace: __wait_for_common+0x194/0x1a8 (P) wait_for_completion_timeout+0x20/0x2c cci_remove+0xc4/0x138 [i2c_qcom_cci] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci] .... | ||||
| CVE-2026-53348 | 1 Linux | 1 Linux Kernel | 2026-07-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: fix NULL pointer dereference in sdca_dev_unregister_functions sdca_dev_unregister_functions() iterates over all SDCA function descriptors and calls sdca_dev_unregister() on each func_dev without checking for NULL. When a function registration has failed partway through, or the device cleanup races with probe deferral, func_dev entries may be NULL, leading to a kernel oops: BUG: kernel NULL pointer dereference, address: 0000000000000040 RIP: 0010:device_del+0x1e/0x3e0 Call Trace: sdca_dev_unregister_functions+0x37/0x60 [snd_soc_sdca] release_nodes+0x35/0xb0 devres_release_all+0x90/0x100 device_unbind_cleanup+0xe/0x80 device_release_driver_internal+0x1c1/0x200 bus_remove_device+0xc6/0x130 device_del+0x161/0x3e0 device_unregister+0x17/0x60 sdw_delete_slave+0xb6/0xd0 [soundwire_bus] sdw_bus_master_delete+0x1e/0x50 [soundwire_bus] ... sof_probe_work+0x19/0x30 [snd_sof] This was observed on a Lenovo ThinkPad X1 Carbon G14 (Panther Lake) with the SOF audio driver probe failing due to missing Panther Lake firmware, causing the subsequent cleanup of SoundWire devices to trigger the crash. Fix this with three changes: 1) Add a NULL guard in sdca_dev_unregister() so that callers do not need to pre-validate the pointer (defense in depth). 2) In sdca_dev_unregister_functions(), skip NULL func_dev entries and clear func_dev to NULL after unregistration, making the function idempotent and safe against double-invocation. 3) In sdca_dev_register_functions(), roll back all previously registered functions when a later one fails, so the function array is never left in a partially-populated state. | ||||
| CVE-2026-53350 | 1 Linux | 1 Linux Kernel | 2026-07-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: wm_adsp: Fix NULL dereference when removing firmware controls In wm_adsp_control_remove() check that the priv pointer is not NULL before attempting to cleanup what it points to. When cs_dsp creates a control it calls wm_adsp_control_add_cb() so that wm_adsp can create its own private control data. There are two cases where private data is not created: 1. The control is a SYSTEM control, so an ALSA control is not created. 2. The codec driver has registered a control_add() callback that hides the control, so wm_adsp_control_add() is not called. When cs_dsp_remove destroys its control list it calls wm_adsp_control_remove() for each control. But wm_adsp_control_remove() was attempting to cleanup the private data pointed to by cs_ctl->priv without checking the pointer for NULL. | ||||
| CVE-2026-53356 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix phys BO pread/pwrite with offset sg_page() returns struct page pointer not (void *) so the scaling of pread/pwrite is wrong for phys BO and wrong parts of BO would be accessed if non-zero offset is used. Last impacted platform with overlay or cursor planes using phys mapping was Gen3/945G/Lakeport. (cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6) | ||||
| CVE-2026-53334 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: handle ctx allocation failure Patch series "mm/damon/{reclaim,lru_sort}: handle ctx allocation failures". DAMON_RECLAIM and DAMON_LRU_SORT could dereference NULL pointers if their damon_ctx object allocations fail. The bugs are expected to happen infrequently because the allocations are arguably too small to fail on common setups. But theoretically they are possible and the consequences are bad. Fix those. The issues were discovered [1] by Sashiko. This patch (of 2): DAMON_RECLAIM allocates the damon_ctx object for its kdamond in its init function. damon_reclaim_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL. | ||||
| CVE-2026-53344 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: mcp23s08: Initialize mcp->dev and mcp->addr before regmap init Regmap initialization triggers regcache_maple_populate() which attempts SPI read to populate cache. SPI read requires mcp->dev and mcp->addr to be set, without them, NULL pointer dereference occurs during probe. Move initialization before mcp23s08_spi_regmap_init() call. | ||||
| CVE-2026-53338 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Add NULL check for of_reserved_mem_lookup() in airoha_qdma_init_hfwd_queues() of_reserved_mem_lookup() may return NULL if the reserved memory region referenced by the "memory-region" phandle is not found in the reserved memory table (e.g. due to a misconfigured DTS or a removed memory-region node). The current code dereferences the returned pointer without checking for NULL, leading to a kernel NULL pointer dereference at the following lines: dma_addr = rmem->base; // line 1156 num_desc = div_u64(rmem->size, buf_size); // line 1160 Add a NULL check after of_reserved_mem_lookup() and return -ENODEV if the lookup fails, which is consistent with the existing error handling for of_parse_phandle() failure in the same code block. | ||||
| CVE-2026-53335 | 1 Linux | 1 Linux Kernel | 2026-07-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: handle ctx allocation failure DAMON_LRU_SORT allocates the damon_ctx object for its kdamond in its init function. damon_lru_sort_enabled_store() wrongly assumes the allocation will always succeed once tried. If the damon_ctx allocation was failed, therefore, code execution reaches to damon_commit_ctx() while 'ctx' is NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the NULL dereference by returning -ENOMEM if 'ctx' is NULL. | ||||
| CVE-2026-52945 | 1 Linux | 1 Linux Kernel | 2026-07-01 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "wireguard: device: enable threaded NAPI" This reverts commit 933466fc50a8e4eb167acbd0d8ec96a078462e9c which is commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e upstream. We have had three independent production user reports in combination with Cilium utilizing WireGuard as encryption underneath that k8s Pod E/W traffic to certain peer nodes fully stalled. The situation appears as follows: - Occurs very rarely but at random times under heavy networking load. - Once the issue triggers the decryption side stops working completely for that WireGuard peer, other peers keep working fine. The stall happens also for newly initiated connections towards that particular WireGuard peer. - Only the decryption side is affected, never the encryption side. - Once it triggers, it never recovers and remains in this state, the CPU/mem on that node looks normal, no leak, busy loop or crash. - bpftrace on the affected system shows that wg_prev_queue_enqueue fails, thus the MAX_QUEUED_PACKETS (1024 skbs!) for the peer's rx_queue is reached. - Also, bpftrace shows that wg_packet_rx_poll for that peer is never called again after reaching this state for that peer. For other peers wg_packet_rx_poll does get called normally. - Commit db9ae3b ("wireguard: device: enable threaded NAPI") switched WireGuard to threaded NAPI by default. The default has not been changed for triggering the issue, neither did CPU hotplugging occur (i.e. 5bd8de2 ("wireguard: queueing: always return valid online CPU in wg_cpumask_choose_online()")). - The issue has been observed with stable kernels of v5.15 as well as v6.1. It was reported to us that v5.10 stable is working fine, and no report on v6.6 stable either (somewhat related discussion in [0] though). - In the WireGuard driver the only material difference between v5.10 stable and v5.15 stable is the switch to threaded NAPI by default. [0] https://lore.kernel.org/netdev/CA+wXwBTT74RErDGAnj98PqS=wvdh8eM1pi4q6tTdExtjnokKqA@mail.gmail.com/ Breakdown of the problem: 1) skbs arriving for decryption are enqueued to the peer->rx_queue in wg_packet_consume_data via wg_queue_enqueue_per_device_and_peer. 2) The latter only moves the skb into the MPSC peer queue if it does not surpass MAX_QUEUED_PACKETS (1024) which is kept track in an atomic counter via wg_prev_queue_enqueue. 3) In case enqueueing was successful, the skb is also queued up in the device queue, round-robin picks a next online CPU, and schedules the decryption worker. 4) The wg_packet_decrypt_worker, once scheduled, picks these up from the queue, decrypts the packets and once done calls into wg_queue_enqueue_per_peer_rx. 5) The latter updates the state to PACKET_STATE_CRYPTED on success and calls napi_schedule on the per peer->napi instance. 6) NAPI then polls via wg_packet_rx_poll. wg_prev_queue_peek checks on the peer->rx_queue. It will wg_prev_queue_dequeue if the queue->peeked skb was not cached yet, or just return the latter otherwise. (wg_prev_queue_drop_peeked later clears the cache.) 7) From an ordering perspective, the peer->rx_queue has skbs in order while the device queue with the per-CPU worker threads from a global ordering PoV can finish the decryption and signal the skb PACKET_STATE_CRYPTED out of order. 8) A situation can be observed that the first packet coming in will be stuck waiting for the decryption worker to be scheduled for a longer time when the system is under pressure. 9) While this is the case, the other CPUs in the meantime finish decryption and call into napi_schedule. 10) Now in wg_packet_rx_poll it picks up the first in-order skb from the peer->rx_queue and sees that its state is still PACKET_STATE_UNCRYPTED. The NAPI poll routine then exits e ---truncated--- | ||||
| CVE-2025-4598 | 5 Debian, Linux, Oracle and 2 more | 10 Debian Linux, Linux Kernel, Linux and 7 more | 2026-06-30 | 4.7 Medium |
| A vulnerability was found in systemd-coredump. This flaw allows an attacker to force a SUID process to crash and replace it with a non-SUID binary to access the original's privileged process coredump, allowing the attacker to read sensitive data, such as /etc/shadow content, loaded by the original process. A SUID binary or process has a special type of permission, which allows the process to run with the file owner's permissions, regardless of the user executing the binary. This allows the process to access more restricted data than unprivileged users or processes would be able to. An attacker can leverage this flaw by forcing a SUID process to crash and force the Linux kernel to recycle the process PID before systemd-coredump can analyze the /proc/pid/auxv file. If the attacker wins the race condition, they gain access to the original's SUID process coredump file. They can read sensitive content loaded into memory by the original binary, affecting data confidentiality. | ||||
| CVE-2026-53022 | 1 Linux | 1 Linux Kernel | 2026-06-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: bound enumeration string aggregation populate_enum_data() aggregates firmware-provided value-modifier and possible-value strings into fixed 512-byte struct members. The current code bounds each individual source string but then appends every string and separator with raw strcat() and no remaining-space check. Switch the aggregation loops to a bounded append helper and reject enumeration packages whose combined strings do not fit in the destination buffers. [ij: add include] | ||||