Total
254 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-33986 | 1 Freerdp | 1 Freerdp | 2026-04-02 | 7.5 High |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, in yuv_ensure_buffer() in libfreerdp/codec/h264.c, h264->width and h264->height are updated before the reallocation loop. If any winpr_aligned_recalloc() call fails, the function returns FALSE but width/height are already inflated. This issue has been patched in version 3.24.2. | ||||
| CVE-2026-33987 | 1 Freerdp | 1 Freerdp | 2026-04-02 | 7.1 High |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, in persistent_cache_read_entry_v3() in libfreerdp/cache/persistent.c, persistent->bmpSize is updated before winpr_aligned_recalloc(). If realloc fails, bmpSize is inflated while bmpData points to the old buffer. This issue has been patched in version 3.24.2. | ||||
| CVE-2026-23390 | 1 Linux | 1 Linux Kernel | 2026-03-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow The dma_map_sg tracepoint can trigger a perf buffer overflow when tracing large scatter-gather lists. With devices like virtio-gpu creating large DRM buffers, nents can exceed 1000 entries, resulting in: phys_addrs: 1000 * 8 bytes = 8,000 bytes dma_addrs: 1000 * 8 bytes = 8,000 bytes lengths: 1000 * 4 bytes = 4,000 bytes Total: ~20,000 bytes This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing: WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405 perf buffer not large enough, wanted 24620, have 8192 Cap all three dynamic arrays at 128 entries using min() in the array size calculation. This ensures arrays are only as large as needed (up to the cap), avoiding unnecessary memory allocation for small operations while preventing overflow for large ones. The tracepoint now records the full nents/ents counts and a truncated flag so users can see when data has been capped. Changes in v2: - Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from Steven Rostedt) - This allocates only what's needed up to the cap, avoiding waste for small operations Reviwed-by: Sean Anderson <sean.anderson@linux.dev> | ||||
| CVE-2025-33216 | 1 Nvidia | 1 Snap-4 Container | 2026-03-25 | 6.8 Medium |
| NVIDIA SNAP-4 Container contains a vulnerability in the configuration interface where an attacker on a VM may cause an incorrect calculation of buffer size by sending crafted configurations. A successful exploit of this vulnerability may lead to crash of the SNAP service, causing denial of service of the storage service to the host. | ||||
| CVE-2019-25555 | 1 Pixarra | 1 Twistedbrush Pro Studio | 2026-03-25 | 6.2 Medium |
| TwistedBrush Pro Studio 24.06 contains a denial of service vulnerability in the Script Recorder component that allows local attackers to crash the application by supplying an excessively large buffer. Attackers can paste a malicious string containing 500,000 characters into the Description field of the Script Recorder dialog to trigger an application crash. | ||||
| CVE-2026-4442 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-03-25 | 8.8 High |
| Heap buffer overflow in CSS in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-4463 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-03-25 | 8.8 High |
| Heap buffer overflow in WebRTC in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2006-10002 | 1 Toddr | 2 Xml::parser, Xml\ | 2026-03-25 | 9.8 Critical |
| XML::Parser versions through 2.45 for Perl could overflow the pre-allocated buffer size cause a heap corruption (double free or corruption) and crashes. A :utf8 PerlIO layer, parse_stream() in Expat.xs could overflow the XML input buffer because Perl's read() returns decoded characters while SvPV() gives back multi-byte UTF-8 bytes that can exceed the pre-allocated buffer size. This can cause heap corruption (double free or corruption) and crashes. | ||||
| CVE-2026-31970 | 2 Htslib, Samtools | 2 Htslib, Htslib | 2026-03-25 | 8.1 High |
| HTSlib is a library for reading and writing bioinformatics file formats. GZI files are used to index block-compressed GZIP [BGZF] files. In the GZI loading function, `bgzf_index_load_hfile()`, it was possible to trigger an integer overflow, leading to an under- or zero-sized buffer being allocated to store the index. Sixteen zero bytes would then be written to this buffer, and, depending on the result of the overflow the rest of the file may also be loaded into the buffer as well. If the function did attempt to load the data, it would eventually fail due to not reading the expected number of records, and then try to free the overflowed heap buffer. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. The easiest work-around is to discard any `.gzi` index files from untrusted sources, and use the `bgzip -r` option to recreate them. | ||||
| CVE-2026-31806 | 1 Freerdp | 1 Freerdp | 2026-03-23 | 9.8 Critical |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.24.0, the gdi_surface_bits() function processes SURFACE_BITS_COMMAND messages sent by the RDP server. When the command is handled using NSCodec, the bmp.width and bmp.height values provided by the server are not properly validated against the actual desktop dimensions. A malicious RDP server can supply crafted bmp.width and bmp.height values that exceed the expected surface size. Because these values are used during bitmap decoding and memory operations without proper bounds checking, this can lead to a heap buffer overflow. Since the attacker can also control the associated pixel data transmitted by the server, the overflow may be exploitable to overwrite adjacent heap memory. This vulnerability is fixed in 3.24.0. | ||||
| CVE-2025-33124 | 1 Ibm | 2 Db2 Merge Backup, Db2 Merge Backup For Linux Unix And Windows | 2026-02-26 | 6.5 Medium |
| IBM DB2 Merge Backup for Linux, UNIX and Windows 12.1.0.0 could allow an authenticated user to cause the program to crash due to the incorrect calculation of a buffer size. | ||||
| CVE-2025-27053 | 1 Qualcomm | 639 215 Mobile Platform, 215 Mobile Platform Firmware, 315 5g Iot Modem and 636 more | 2026-02-26 | 7.8 High |
| Memory corruption during PlayReady APP usecase while processing TA commands. | ||||
| CVE-2025-27074 | 1 Qualcomm | 191 Apq8064au, Apq8064au Firmware, Csr8811 and 188 more | 2026-02-26 | 8.8 High |
| Memory corruption while processing a GP command response. | ||||
| CVE-2025-69419 | 1 Openssl | 1 Openssl | 2026-02-02 | 7.4 High |
| Issue summary: Calling PKCS12_get_friendlyname() function on a maliciously crafted PKCS#12 file with a BMPString (UTF-16BE) friendly name containing non-ASCII BMP code point can trigger a one byte write before the allocated buffer. Impact summary: The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service. The OPENSSL_uni2utf8() function performs a two-pass conversion of a PKCS#12 BMPString (UTF-16BE) to UTF-8. In the second pass, when emitting UTF-8 bytes, the helper function bmp_to_utf8() incorrectly forwards the remaining UTF-16 source byte count as the destination buffer capacity to UTF8_putc(). For BMP code points above U+07FF, UTF-8 requires three bytes, but the forwarded capacity can be just two bytes. UTF8_putc() then returns -1, and this negative value is added to the output length without validation, causing the length to become negative. The subsequent trailing NUL byte is then written at a negative offset, causing write outside of heap allocated buffer. The vulnerability is reachable via the public PKCS12_get_friendlyname() API when parsing attacker-controlled PKCS#12 files. While PKCS12_parse() uses a different code path that avoids this issue, PKCS12_get_friendlyname() directly invokes the vulnerable function. Exploitation requires an attacker to provide a malicious PKCS#12 file to be parsed by the application and the attacker can just trigger a one zero byte write before the allocated buffer. For that reason the issue was assessed as Low severity according to our Security Policy. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the PKCS#12 implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3, 3.0 and 1.1.1 are vulnerable to this issue. OpenSSL 1.0.2 is not affected by this issue. | ||||
| CVE-2025-52955 | 2 Juniper, Juniper Networks | 3 Junos, Junos Os Evolved, Junos Os | 2026-01-23 | 6.5 Medium |
| An Incorrect Calculation of Buffer Size vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent unauthenticated attacker to cause a memory corruption that leads to a rpd crash. When the logical interface using a routing instance flaps continuously, specific updates are sent to the jflow/sflow modules. This results in memory corruption, leading to an rpd crash and restart. Continued receipt of these specific updates will cause a sustained Denial of Service condition. This issue affects Junos OS: * All versions before 21.2R3-S9, * All versions of 21.4, * All versions of 22.2, * from 22.4 before 22.4R3-S7, * from 23.2 before 23.2R2-S3, * from 23.4 before 23.4R2-S4, * from 24.2 before 24.2R2. Junos OS Evolved: * All versions of 21.2-EVO, * All versions of 21.4-EVO, * All versions of 22.2-EVO, * from 22.4 before 22.4R3-S7-EVO, * from 23.2 before 23.2R2-S3-EVO, * from 23.4 before 23.4R2-S4-EVO, * from 24.2 before 24.2R2-EVO. | ||||
| CVE-2025-55297 | 1 Espressif | 1 Esp-idf | 2026-01-22 | 8.8 High |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. The BluFi example bundled in ESP-IDF was vulnerable to memory overflows in two areas: Wi-Fi credential handling and Diffie–Hellman key exchange. This vulnerability is fixed in 5.4.1, 5.3.3, 5.1.6, and 5.0.9. | ||||
| CVE-2024-57843 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix overflow inside virtnet_rq_alloc When the frag just got a page, then may lead to regression on VM. Specially if the sysctl net.core.high_order_alloc_disable value is 1, then the frag always get a page when do refill. Which could see reliable crashes or scp failure (scp a file 100M in size to VM). The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning of a new frag. When the frag size is larger than PAGE_SIZE, everything is fine. However, if the frag is only one page and the total size of the buffer and virtnet_rq_dma is larger than one page, an overflow may occur. The commit f9dac92ba908 ("virtio_ring: enable premapped mode whatever use_dma_api") introduced this problem. And we reverted some commits to fix this in last linux version. Now we try to enable it and fix this bug directly. Here, when the frag size is not enough, we reduce the buffer len to fix this problem. | ||||
| CVE-2023-52622 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2026-01-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid online resizing failures due to oversized flex bg When we online resize an ext4 filesystem with a oversized flexbg_size, mkfs.ext4 -F -G 67108864 $dev -b 4096 100M mount $dev $dir resize2fs $dev 16G the following WARN_ON is triggered: ================================================================== WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550 Modules linked in: sg(E) CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314 RIP: 0010:__alloc_pages+0x411/0x550 Call Trace: <TASK> __kmalloc_large_node+0xa2/0x200 __kmalloc+0x16e/0x290 ext4_resize_fs+0x481/0xd80 __ext4_ioctl+0x1616/0x1d90 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xf0/0x150 do_syscall_64+0x3b/0x90 ================================================================== This is because flexbg_size is too large and the size of the new_group_data array to be allocated exceeds MAX_ORDER. Currently, the minimum value of MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding maximum number of groups that can be allocated is: (PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ≈ 21845 And the value that is down-aligned to the power of 2 is 16384. Therefore, this value is defined as MAX_RESIZE_BG, and the number of groups added each time does not exceed this value during resizing, and is added multiple times to complete the online resizing. The difference is that the metadata in a flex_bg may be more dispersed. | ||||
| CVE-2025-43965 | 2 Debian, Imagemagick | 2 Debian Linux, Imagemagick | 2025-12-31 | 2.9 Low |
| In MIFF image processing in ImageMagick before 7.1.1-44, image depth is mishandled after SetQuantumFormat is used. | ||||
| CVE-2025-46393 | 1 Imagemagick | 1 Imagemagick | 2025-12-31 | 2.9 Low |
| In multispectral MIFF image processing in ImageMagick before 7.1.1-44, packet_size is mishandled (related to the rendering of all channels in an arbitrary order). | ||||