Total
1134 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80608 | 1 Linux | 1 Linux Kernel | 2026-09-01 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix iommu domain lifetime race during device removal When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If amdxdna_gem_obj_free() is called after device removal, it may attempt to access xdna->domain, resulting in a use-after-free. Fix the race by adding freeing xdna->domain as a managed release action, so its lifetime is managed by DRM and remains valid until all managed resources are released. | ||||
| CVE-2026-80650 | 1 Linux | 1 Linux Kernel | 2026-09-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: atomisp: gc2235: fix UAF and memory leak gc2235_probe() handles its error paths incorrectly. If media_entity_pads_init() fails, gc2235_remove() is called, which tears down the subdev and frees dev, but then still falls through to atomisp_register_i2c_module(). This results in use-after-free. If atomisp_register_i2c_module() fails, the media entity and control handler are left initialized and dev is leaked. gc2235_remove() unconditionally calls media_entity_cleanup() and v4l2_ctrl_handler_free(), but these are not initialized at every error path in gc2235_probe(). Replace gc2235_remove() calls in the probe error paths with explicit unwind labels that free only the resources initialized at each point of failure, in reverse order of initialization. | ||||
| CVE-2026-80668 | 1 Linux | 1 Linux Kernel | 2026-09-01 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use conntrack GC to reap expectations This patch replaces the timer API by GC worker approach for expectations, as it already happened in many other subsystems. Use the existing conntrack GC worker to iterate over the local list of expectations in the master conntrack to reap expired expectations. Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct expectation which nevers sets it. Hold the expectation spinlock while iterating over the master conntrack expectation list to synchronize with nf_ct_remove_expectations(). This also performs runtime packet path garbage collection through the expectation insertion and lookup functions while walking over one of the chains of the global expectation hashtables. Unconfirmed conntrack entries are skipped since ct->ext can be reallocated and dying are skipped since those will be gone soon. Set on IPS_HELPER_BIT if the helper ct extension is added, then the new GC worker does not need to bump the ct refcount to check if the ct->ext helper is available. This removes the extra bump on the refcount for expectation timers, this allows to remove several nf_ct_expect_put() calls after the unlink, after this update only refcount remains at 1 while on the expectation hashes. This patch implicitly addresses a race with the existing timer API allowing an expectation to access a stale exp->master pointer which has been already released when expectation removal loses races with an expiring timer, ie. timer_del() reporting false. Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This is needed by nf_conntrack_unexpect_related() which is called in error paths to invalidate newly created expectations that has been added into the hashes. These expectactions cannot be inmediately released as GC or nf_ct_remove_expectations() could race to make it. On expectation insert, the runtime GC reaps stale expectations before checking the expectation limit set by policy. Set current timestamp in nf_ct_expect_alloc(), then add the expectation policy timeout (or custom timeout specified added on top of this) to specify the expectation lifetime. | ||||
| CVE-2026-80642 | 1 Linux | 1 Linux Kernel | 2026-09-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: Reference count incoming FLB data Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so that the FLB structure cannot be freed while the caller is actively using it. Add an additional liveupdate_flb_put_incoming() function so the caller can explicitly indicate when it is done using the FLB data. During a Live Update, a subsystem might need to hold onto the incoming File-Lifecycle-Bound (FLB) data for an extended period, such as during device enumeration. Incrementing the reference count guarantees that the data remains valid and accessible until the subsystem releases it, preventing future use-after-free bugs. | ||||
| CVE-2026-80688 | 1 Linux | 1 Linux Kernel | 2026-09-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: drop __init from vec_check_unaligned_access_speed_all_cpus This function runs within a kthread and need not necessarily finish before system finishes boot and free_initmem() unmaps the .init.text section. This function makes calls to SBI for probing unaligned access speed, and if this is slow for some reason (say some debug prints were added to SBI), the kthread can still be running at this point and result in an instruction page fault when trying to fetch from the freed region. [ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8 [ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000 [ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3 [ 25.661244] Oops [#1] [ 25.662997] Modules linked in: [ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY [ 25.674669] Hardware name: Tenstorrent Blackhole (DT) [ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20 [ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000 [ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30 [ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002 [ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000 [ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30 [ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0 [ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402 [ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000 [ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c [ 25.755060] [<ffffffff80a04ef8>] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.760964] [<ffffffff80047a10>] kthread+0xd8/0xfc [ 25.764660] [<ffffffff80010c48>] ret_from_fork_kernel+0x18/0x1c4 [ 25.769220] [<ffffffff80895fe6>] ret_from_fork_kernel_asm+0x16/0x18 [ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc Drop __init from its signature so that this doesn't happen. | ||||
| CVE-2026-42007 | 1 Open-xchange | 2 Ox Dovecot Ce, Ox Dovecot Pro | 2026-09-01 | 9.1 Critical |
| An attacker that has valid credentials can use a Sieve script with the editheader extension to trigger a use-after-free in the mail editing code, and to write memory contents beyond the intended buffer into the delivered mail. This causes memory leak and opportunity to do memory corruption during mail delivery, which can crash the delivery process and may allow execution of arbitrary code in the context of that process. Disable the Sieve editheader extension. Update to non-vulnerable version. No publicly available exploits are known. | ||||
| CVE-2026-82623 | 1 Open62541 | 1 Open62541 | 2026-08-31 | 5.3 Medium |
| A vulnerability was detected in open62541 up to 1.5.5. Affected by this vulnerability is the function UA_DataValue_backend_copyRange of the file plugins/historydata/ua_history_data_backend_memory.c of the component History Backend. The manipulation results in use after free. The attack can be launched remotely. The exploit is now public and may be used. The project closed the issue report, stating that this is not the official way to report a security vulnerability. | ||||
| CVE-2026-76891 | 1 Wireshark | 1 Wireshark | 2026-08-31 | 3.1 Low |
| Crash in sharkd in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | ||||
| CVE-2026-76890 | 1 Wireshark | 1 Wireshark | 2026-08-31 | 3.1 Low |
| Crash in sharkd in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | ||||
| CVE-2026-76928 | 1 Wireshark | 1 Wireshark | 2026-08-31 | 7.5 High |
| X.509IF protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | ||||
| CVE-2026-80619 | 1 Linux | 1 Linux Kernel | 2026-08-31 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix potential UAF in aa_replace_profiles The function aa_replace_profiles was accessing udata->size after calling aa_put_loaddata(udata), causing a potential UAF. Fixed this by saving the size to a local variable before dropping the reference. | ||||
| CVE-2026-80680 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: amd-mp2: Unregister callback on adapter add failure amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI driver's callback table before the adapter is registered. If i2c_add_adapter() fails, probe returns and devres frees the context, but the PCI driver can still dereference the stale pointer from its IRQ and system-sleep callbacks. Unregister the callback before returning the adapter registration error. | ||||
| CVE-2026-80714 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: do not propagate one-packet flag to synced conns Synced connections can be created before their destination exists. When the destination is later added, ip_vs_bind_dest() copies connection flags from the destination into cp->flags. IP_VS_CONN_F_ONE_PACKET connections are not synced. If a synced connection inherits IP_VS_CONN_F_ONE_PACKET while it is already hashed, expiry can treat it as a one-packet connection and skip unlinking the existing conn_tab node, leaving stale hash nodes pointing at a freed struct ip_vs_conn. Drop IP_VS_CONN_F_ONE_PACKET from destination flags when binding synced connections. | ||||
| CVE-2026-80661 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ufs: core: tracing: Do not dereference pointers in TP_printk() The trace events in drivers/ufs/core/ufs_trace.h were converted to take a pointer to the hba structure as an argument for the tracepoint and then in TP_printk() the printing of the dev_name from the ring buffer was converted to using the dev dereferenced pointer from the hba saved pointer. This is not allowed as the TP_printk() is executed at the time the trace event is read from /sys/kernel/tracing/trace file. That can happen literally, seconds, minutes, hours, weeks, days, or even months later! There is no guarantee that the hba pointer will still exist by the time it is dereferenced when the "trace" file is read. Instead, save the device name from the hba pointer at the time the tracepoint is called and place it into the ring buffer event. Then the TP_printk() can read the name directly from the ring buffer and remove the possibility that it will read a freed pointer and crash the kernel. This was detected when testing the trace event code that looks for TP_printk() parameters doing illegal derferences[1] [1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/ | ||||
| CVE-2026-80600 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: acquire ARP hw source only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. | ||||
| CVE-2026-80716 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: wake linked drain waiters on unlink snd_pcm_drain() on a linked stream parks an on-stack wait entry on the drained peer's runtime->sleep, and after schedule_timeout() removes it only if that peer is still found in the caller's group. If group membership changes during the wait and the sleep ends by signal or timeout (so autoremove_wake_function() does not run), finish_wait() is skipped and snd_pcm_drain() returns with the entry still queued on that stream's sleep list; a later wake_up() then walks a freed stack frame. This is reachable by unlinking either the drained or the draining stream. Unlike the close path (snd_pcm_drop() -> snd_pcm_post_stop()), snd_pcm_unlink() never wakes the sleep queues. Wake every group member under the group lock before the membership change, so a linked drainer is released and drops its entry while the streams are still grouped. The window was opened when snd_pcm_link_rwsem stopped being held across the wait and the removal became conditional on group membership (see Fixes). The later switch to finish_wait() kept that conditional removal, so the signal/timeout case remained. | ||||
| CVE-2026-80681 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: re-fetch eth header after route_shortcircuit() Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb). Inside route_shortcircuit(), pskb_may_pull() can be called, which may reallocate skb->head. In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to freed memory, leading to a use-after-free when dereferencing eth->h_dest. Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit(). | ||||
| CVE-2026-26447 | 2026-08-28 | 7.5 High | ||
| Stomper 5e2741e is vulnerable to Use-After-Free. When a single client repeatedly issues SUBSCRIBE commands for the same destination over one connection and then closes that connection, the broker performs incorrect cleanup of its internal subscription structures. This results in a heap use-after-free during StompClient destruction, causing the broker process to crash. An unauthenticated client can exploit this to reliably trigger a denial of service. | ||||
| CVE-2026-26448 | 2026-08-28 | 9.8 Critical | ||
| Stomper 5e2741e is vulnerable to Use-After-Free. When a client sends multiple CONNECT frames on the same TCP connection, and subsequently another client (or a later connection) sends SEND frames to a destination previously subscribed on that connection, the broker may dereference a pointer to a StompStreamSocket object that has already been freed. This results in a heap use-after-free and process crash. Because the protocol does not authenticate or restrict such sequences by default. | ||||
| CVE-2026-80589 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: block: stop the timeout timer when releasing a never added disk disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to stop it. __del_gendisk() and blk_mq_destroy_queue() still do; only the probe failure path lost it. nvme gets there because nvme_update_ns_info() submits Report Zones or FDP io-mgmt-recv on ns->queue before the disk is added, so a later failure - a concurrent reset setting NVME_CTRL_FROZEN, or device_add_disk() failing - lands in put_disk() with the timer armed: BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340 Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37 __timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621 blk_sync_queue+0x22/0x40 block/blk-core.c:222 nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362 nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264 Allocated by task 34: __blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462 nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146 Freed by task 0: blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254 rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857 The queue being synced there is ctrl->admin_q, only a victim sharing a timer wheel bucket with the freed queue's dangling entry; other runs tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work(). Failing nvme_alloc_ns() with a debug patch makes it deterministic: one leaked timer trips KASAN within seconds, while 1987 patched releases produced no splat. Stop the timer and the queue work items before blk_mq_exit_queue(), like blk_mq_destroy_queue() does. Found by FuzzNvme. | ||||