Total
15010 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-82618 | 1 Systerel | 1 S2opc | 2026-08-31 | 4.3 Medium |
| A vulnerability was determined in Systerel S2OPC up to 1.7.3. The affected element is the function set_range_matrix_on_string_array of the file src/Common/opcua_types/sopc_builtintypes.c of the component String Array Range Writing. This manipulation causes out-of-bounds read. The attack is possible to be carried out remotely. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-82592 | 1 D-link | 1 Dir-825m | 2026-08-31 | 9.9 Critical |
| A vulnerability was detected in D-Link DIR-825M 1.1.8. This affects the function sub_46725C of the file /boafrm/formDiskFormat of the component Disk Formatting Handler Endpoint. The manipulation of the argument partition results in stack-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. | ||||
| CVE-2026-82587 | 1 Open5gs | 1 Open5gs | 2026-08-31 | 4.3 Medium |
| A vulnerability was determined in Open5GS up to 2.7.7. This vulnerability affects the function amf_namf_comm_decode_ue_mm_context_list of the file src/amf/namf-handler.c of the component AMF. This manipulation of the argument ueContext.mmContextList[*].allowedNssai causes memory corruption. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 2.8.0 is able to resolve this issue. Patch name: abf8a836564b966b5141110fc25ed413c4f17522. It is recommended to upgrade the affected component. | ||||
| CVE-2024-12085 | 8 Almalinux, Archlinux, Gentoo and 5 more | 29 Almalinux, Arch Linux, Linux and 26 more | 2026-08-31 | 7.5 High |
| A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time. | ||||
| CVE-2026-82677 | 1 Valkey-io | 1 Valkey | 2026-08-31 | 2.4 Low |
| A vulnerability was determined in valkey-io valkey 9.1.0. Impacted is the function moduleTimerHandler of the file src/module.c of the component Module Timer Subsystem. This manipulation causes double free. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. Patch name: b349fe2821e3998534b1454c1b64a478daf8c6b7. To fix this issue, it is recommended to deploy a patch. | ||||
| CVE-2026-82680 | 1 D-link | 1 Dsm-g600 | 2026-08-31 | 8.8 High |
| A weakness has been identified in D-Link DSM-G600 1.01. This affects an unknown function of the file /load_file.cgi of the component Multipart Handler. Executing a manipulation can lead to out-of-bounds write. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. | ||||
| CVE-2026-20731 | 1 Intel | 2 Neural Processing Unit Driver, Npu Drivers | 2026-08-31 | 6.1 Medium |
| Improper buffer restrictions for the Intel(R) NPU Driver for all versions within Ring 3: User Applications may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | ||||
| CVE-2026-39830 | 1 Golang | 2 Crypto, Ssh | 2026-08-31 | 9.1 Critical |
| A malicious SSH peer could send unsolicited global request responses to fill an internal buffer, blocking the connection's read loop. The blocked goroutine could not be released by calling Close(), resulting in a resource leak per connection. Unsolicited global responses are now discarded. | ||||
| CVE-2026-82631 | 1 Valkey-io | 1 Valkey | 2026-08-31 | 2.2 Low |
| A security flaw has been discovered in valkey-io valkey 9.1.0. The affected element is the function handleClientsBlockedOnKey of the file src/blocked.c of the component Blocked-on-keys Subsystem. The manipulation results in use after free. The attack may be performed from remote. A high complexity level is associated with this attack. The exploitability is described as difficult. The exploit has been released to the public and may be used for attacks. The patch is identified as b2fb0e13f5b4c8c2fb63dcfc2c37a067a0d6d20b. Applying a patch is advised to resolve this issue. | ||||
| CVE-2026-80591 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix listxattr handling of corrupted xattr entries Validate the xattr entry before reading its fields in f2fs_listxattr(). Return -EFSCORRUPTED when the entry is outside the valid xattr storage area instead of returning a successful partial result. | ||||
| CVE-2026-80702 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: fix guest_memory_dirty bitfield clobbered as size Two sites in vmwgfx_resource.c assign boolean literals to res->guest_memory_size, which is an unsigned long allocation-size field; the intended target is the adjacent res->guest_memory_dirty bitfield. After the assignments the field holds 0 or 1 instead of the resource's MOB allocation size: - vmw_resource_release() writes 0 (false), and - vmw_resource_unbind_list() writes 1 (true). Subsequent revalidation paths read guest_memory_size when computing the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer allocation size (vmw_resource_buf_alloc()), producing zero-length walks or wrap-around ranges that read or write past the MOB bitmap. The dirty-tracking intent of the original code (mark the resource as dirtied since the last sync) is also lost, since guest_memory_dirty is never updated. Rename both assignments to guest_memory_dirty. | ||||
| CVE-2026-80722 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate individual TWT params before driver setup ieee80211_process_rx_twt_action() only partially validates a received S1G TWT setup frame before queueing it. An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup() with twt->length too short for the full struct ieee80211_twt_params. The individual path passes twt to drv_add_twt_setup(). Both the tracepoint and the driver callback consume the complete parameters block, not merely req_type. Do not pass a short individual agreement to the driver. Broadcast agreements remain unchanged because they are rejected locally after accessing only req_type. [edit commit message to not overclaim lack of validation nor understate driver impact] | ||||
| CVE-2026-80600 | 1 Linux | 1 Linux Kernel | 2026-08-29 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: acquire ARP hw source only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. | ||||
| CVE-2026-19508 | 1 Rdk | 1 Rdk-b Webui | 2026-08-27 | 9.8 Critical |
| Heap-based buffer overflow in the multipart form-data parser in `jst_post.c` in RDK-B WebUI `rdkb-2025q4-kirkstone.04.10.26` allows a remote unauthenticated attacker to cause memory corruption and denial of service, and potentially execute arbitrary code, via a crafted multipart/form-data request. | ||||
| CVE-2026-79911 | 1 Totolink | 2 N600r, N600r Firmware | 2026-08-27 | 10 Critical |
| A security vulnerability has been detected in TOTOLINK N600R 4.3.0cu.7647_B20210106. The affected element is the function setSystemConfig of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument Hostname leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2026-78049 | 1 Systerel | 1 S2opc | 2026-08-27 | 3.7 Low |
| A vulnerability has been found in Systerel S2OPC up to 1.7.3. Impacted is the function SOPC_NodeMgtHelperInternal_AddVariableNodeAttributes of the file src/ClientServer/address_space/internal/sopc_node_mgt_helper_internal.c of the component AddNodes Service. The manipulation of the argument UserAccessLevel leads to out-of-bounds read. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is aafbd37d381b618312ebdf5ddf57027f62c14fdd. It is suggested to install a patch to address this issue. | ||||
| CVE-2026-64705 | 1 Apple | 1 Macos | 2026-08-27 | 5.5 Medium |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.7, macOS Sonoma 14.8.7. An app may be able to cause unexpected system termination or write kernel memory. | ||||
| CVE-2026-81581 | 1 Wibu-systems-ag | 1 Wibukey | 2026-08-27 | 8.8 High |
| Improper validation of memory boundaries in WibuKey64.sys of WibuKey up to 6.70 for Windows can be exploited by an attacker by setting the pointers outside the scope of the program. This usually results in a denial of service, yet we cannot rule out the possibility of exploits that can cause Remote Code Execution and Privilege Escalation (since the driver runs with system privileges). | ||||
| CVE-2026-80522 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - fix rctx->cryptlen calculation in tegra_gcm_do_one_req() Perform rctx->cryptlen calculation in tegra_gcm_do_one_req() the same way it is done in tegra_ccm_crypt_init(). The current formulae may lead to a crash if a caller does not call tegra_gcm_setauthsize() and so ctx->authsize remains zero. Then a decrypt operation with incorrect rctx->cryptlen will lead to a write beyound rctx->dst_sg buffer. As a follow-up cleanup delete struct tegra_aead_ctx->authsize field since it appears to be completely unused. Also simplify tegra_ccm_setauthsize() and tegra_gcm_setauthsize() functions respectively. | ||||
| CVE-2026-80545 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve EP11 CPRB length and overflow checks The xcrb_msg_to_type6_ep11cprb_msgx() function lacks proper input validation, creating security vulnerabilities: 1. Missing minimum size validation: The ep11_cprb structure and subsequent payload fields (pld_tag, pld_lenfmt) are copied from userspace without verifying sufficient buffer length. 2. Arithmetic overflow in length calculations: CEIL4 alignment could overflow, bypassing size checks and enabling buffer overflows. 3. The payload is asn1 encoded but the function just uses a simple c struct overlay to access some fields of the payload. Fix by using size_t for length calculations, adding U32_MAX boundary checks after alignment, and validating minimum request size and minimum reply size before copying from userspace. Do a very simple asn1 parsing of the payload up to the function value field. | ||||