Total
3336 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-3066 | 1 Hummerrisk | 1 Hummerrisk | 2026-04-17 | 6.3 Medium |
| A flaw has been found in HummerRisk up to 1.5.0. This vulnerability affects the function fixedCommand of the file hummer-common/hummer-common-core/src/main/java/com/hummer/common/core/utils/PlatformUtils.java of the component Cloud Compliance Scanning. Executing a manipulation can lead to command injection. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-4786 | 1 Python | 1 Cpython | 2026-04-17 | 7.3 High |
| Mitgation of CVE-2026-4519 was incomplete. If the URL contained "%action" the mitigation could be bypassed for certain browser types the "webbrowser.open()" API could have commands injected into the underlying shell. See CVE-2026-4519 for details. | ||||
| CVE-2026-30461 | 1 Daylightstudio | 1 Fuel Cms | 2026-04-17 | 8.3 High |
| Daylight Studio FuelCMS v1.5.2 was discovered to contain an authenticated remote code execution (RCE) vulnerability via the /controllers/Installer.php and the function add_git_submodule. | ||||
| CVE-2026-20147 | 1 Cisco | 2 Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-04-17 | 9.9 Critical |
| A vulnerability in Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node ISE deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. | ||||
| CVE-2026-20186 | 1 Cisco | 1 Identity Services Engine Software | 2026-04-17 | 9.9 Critical |
| A vulnerability in Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have at least Read Only Admin credentials. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node ISE deployments, successful exploitation of these vulnerabilities could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. | ||||
| CVE-2026-30616 | 1 Jaaz | 1 Jaaz | 2026-04-17 | 7.3 High |
| Jaaz 1.0.30 contains a remote code execution vulnerability in its MCP STDIO command execution handling. A remote attacker can send crafted network requests to the network-accessible Jaaz application, causing attacker-controlled commands to be executed on the server. Successful exploitation results in arbitrary command execution within the context of the Jaaz service, potentially allowing full compromise of the affected system. | ||||
| CVE-2026-30617 | 1 Langchain | 1 Langchain | 2026-04-17 | 8.6 High |
| LangChain-ChatChat 0.3.1 contains a remote code execution vulnerability in its MCP STDIO server configuration and execution handling. A remote attacker can access the publicly exposed MCP management interface and configure an MCP STDIO server with attacker-controlled commands and arguments. When the MCP server is started and MCP is enabled for agent execution, subsequent agent activity triggers execution of arbitrary commands on the server. Successful exploitation allows arbitrary command execution within the context of the LangChain-ChatChat service. | ||||
| CVE-2026-30624 | 1 Agent-zero | 1 Agent-zero | 2026-04-17 | 8.6 High |
| Agent Zero 0.9.8 contains a remote code execution vulnerability in its External MCP Servers configuration feature. The application allows users to define MCP servers using a JSON configuration containing arbitrary command and args values. These values are executed by the application when the configuration is applied without sufficient validation or restriction. An attacker may supply a malicious MCP configuration to execute arbitrary operating system commands, potentially resulting in remote code execution with the privileges of the Agent Zero process. | ||||
| CVE-2026-30615 | 1 Windsurf | 1 Windsurf | 2026-04-17 | 8 High |
| A prompt injection vulnerability in Windsurf 1.9544.26 allows remote attackers to execute arbitrary commands on a victim system. When Windsurf processes attacker-controlled HTML content, malicious instructions can cause unauthorized modification of the local MCP configuration and automatic registration of a malicious MCP STDIO server, resulting in execution of arbitrary commands without further user interaction. Successful exploitation may allow attackers to execute commands on behalf of the user, persist malicious MCP configuration changes, and access sensitive information exposed through the application. | ||||
| CVE-2024-53412 | 1 Nietthijmen | 1 Shoppingcart | 2026-04-17 | 8.4 High |
| Command injection in the connect function in NietThijmen ShoppingCart 0.0.2 allows an attacker to execute arbitrary shell commands and achieve remote code execution via injection of malicious payloads into the Port field | ||||
| CVE-2026-3301 | 1 Totolink | 2 N300rh, N300rh Firmware | 2026-04-17 | 9.8 Critical |
| A security flaw has been discovered in Totolink N300RH 6.1c.1353_B20190305. Affected by this vulnerability is the function setWebWlanIdx of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Performing a manipulation of the argument webWlanIdx results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. | ||||
| CVE-2026-2256 | 1 Modelscope | 1 Ms-agent | 2026-04-17 | 6.5 Medium |
| A command injection vulnerability in ModelScope's ms-agent versions v1.6.0rc1 and earlier exists, allowing an attacker to execute arbitrary operating system commands through crafted prompt-derived input. | ||||
| CVE-2026-3662 | 1 Wavlink | 2 Wl-nu516u1, Wl-nu516u1 Firmware | 2026-04-17 | 4.7 Medium |
| A vulnerability has been found in Wavlink WL-NU516U1 240425. This vulnerability affects the function usb_p910 of the file /cgi-bin/adm.cgi. Such manipulation of the argument Pr_mode leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure. | ||||
| CVE-2026-3696 | 1 Totolink | 2 N300rh, N300rh Firmware | 2026-04-17 | 7.3 High |
| A vulnerability was found in Totolink N300RH 6..1c.1353_B20190305. The affected element is the function setWiFiWpsConfig of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation results in os command injection. The attack can be initiated remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-3813 | 1 Opencc | 1 Jflow | 2026-04-17 | 6.3 Medium |
| A vulnerability was identified in opencc JFlow up to 5badc00db382d7cb82dad231e6a866b18e0addfe. Affected by this vulnerability is the function Calculate of the file src/main/java/bp/wf/httphandler/WF_CCForm.java. Such manipulation leads to injection. The attack may be performed from remote. The exploit is publicly available and might be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-6483 | 1 Wavlink | 2 Wl-wn530h4, Wl-wn530h4 Firmware | 2026-04-17 | 7.2 High |
| A vulnerability was found in Wavlink WL-WN530H4 20220721. This vulnerability affects the function strcat/snprintf of the file /cgi-bin/internet.cgi. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 2026.04.16 is able to resolve this issue. Upgrading the affected component is recommended. | ||||
| CVE-2026-35580 | 2 Nationalsecurityagency, Nsa | 2 Emissary, Emissary | 2026-04-16 | 9.1 Critical |
| Emissary is a P2P based data-driven workflow engine. Prior to 8.39.0, GitHub Actions workflow files contained shell injection points where user-controlled workflow_dispatch inputs were interpolated directly into shell commands via ${{ }} expression syntax. An attacker with repository write access could inject arbitrary shell commands, leading to repository poisoning and supply chain compromise affecting all downstream users. This vulnerability is fixed in 8.39.0. | ||||
| CVE-2026-3065 | 1 Hummerrisk | 1 Hummerrisk | 2026-04-16 | 6.3 Medium |
| A vulnerability was detected in HummerRisk up to 1.5.0. This affects the function CommandUtils.commonExecCmdWithResult of the file CloudTaskService.java of the component Cloud Task Dry-run. Performing a manipulation of the argument fileName results in command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-3101 | 1 Intelbras | 3 Tip635g, Tip 635g, Tip 635g Firmware | 2026-04-16 | 6.3 Medium |
| A vulnerability was found in Intelbras TIP 635G 1.12.3.5. This vulnerability affects unknown code of the component Ping Handler. The manipulation results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-3102 | 2 Apple, Exiftool Project | 2 Macos, Exiftool | 2026-04-16 | 6.3 Medium |
| A vulnerability was determined in exiftool up to 13.49 on macOS. This issue affects the function SetMacOSTags of the file lib/Image/ExifTool/MacOS.pm of the component PNG File Parser. This manipulation of the argument DateTimeOriginal causes os command injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 13.50 is capable of addressing this issue. Patch name: e9609a9bcc0d32bd252a709a562fb822d6dd86f7. Upgrading the affected component is recommended. | ||||