Filtered by vendor Linux
Subscriptions
Total
17893 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40319 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Sync pending IRQ work before freeing ring buffer Fix a race where irq_work can be queued in bpf_ringbuf_commit() but the ring buffer is freed before the work executes. In the syzbot reproducer, a BPF program attached to sched_switch triggers bpf_ringbuf_commit(), queuing an irq_work. If the ring buffer is freed before this work executes, the irq_work thread may accesses freed memory. Calling `irq_work_sync(&rb->work)` ensures that all pending irq_work complete before freeing the buffer. | ||||
| CVE-2025-40328 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_close_cached_fid() find_or_create_cached_dir() could grab a new reference after kref_put() had seen the refcount drop to zero but before cfid_list_lock is acquired in smb2_close_cached_fid(), leading to use-after-free. Switch to kref_put_lock() so cfid_release() is called with cfid_list_lock held, closing that gap. | ||||
| CVE-2025-40333 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix infinite loop in __insert_extent_tree() When we get wrong extent info data, and look up extent_node in rb tree, it will cause infinite loop (CONFIG_F2FS_CHECK_FS=n). Avoiding this by return NULL and print some kernel messages in that case. | ||||
| CVE-2025-40339 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix nullptr err of vm_handle_moved If a amdgpu_bo_va is fpriv->prt_va, the bo of this one is always NULL. So, such kind of amdgpu_bo_va should be updated separately before amdgpu_vm_handle_moved. | ||||
| CVE-2022-50563 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm thin: Fix UAF in run_timer_softirq() When dm_resume() and dm_destroy() are concurrent, it will lead to UAF, as follows: BUG: KASAN: use-after-free in __run_timers+0x173/0x710 Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0 <snip> Call Trace: <IRQ> dump_stack_lvl+0x73/0x9f print_report.cold+0x132/0xaa2 _raw_spin_lock_irqsave+0xcd/0x160 __run_timers+0x173/0x710 kasan_report+0xad/0x110 __run_timers+0x173/0x710 __asan_store8+0x9c/0x140 __run_timers+0x173/0x710 call_timer_fn+0x310/0x310 pvclock_clocksource_read+0xfa/0x250 kvm_clock_read+0x2c/0x70 kvm_clock_get_cycles+0xd/0x20 ktime_get+0x5c/0x110 lapic_next_event+0x38/0x50 clockevents_program_event+0xf1/0x1e0 run_timer_softirq+0x49/0x90 __do_softirq+0x16e/0x62c __irq_exit_rcu+0x1fa/0x270 irq_exit_rcu+0x12/0x20 sysvec_apic_timer_interrupt+0x8e/0xc0 One of the concurrency UAF can be shown as below: use free do_resume | __find_device_hash_cell | dm_get | atomic_inc(&md->holders) | | dm_destroy | __dm_destroy | if (!dm_suspended_md(md)) | atomic_read(&md->holders) | msleep(1) dm_resume | __dm_resume | dm_table_resume_targets | pool_resume | do_waker #add delay work | dm_put | atomic_dec(&md->holders) | | dm_table_destroy | pool_dtr | __pool_dec | __pool_destroy | destroy_workqueue | kfree(pool) # free pool time out __do_softirq run_timer_softirq # pool has already been freed This can be easily reproduced using: 1. create thin-pool 2. dmsetup suspend pool 3. dmsetup resume pool 4. dmsetup remove_all # Concurrent with 3 The root cause of this UAF bug is that dm_resume() adds timer after dm_destroy() skips cancelling the timer because of suspend status. After timeout, it will call run_timer_softirq(), however pool has already been freed. The concurrency UAF bug will happen. Therefore, cancelling timer again in __pool_destroy(). | ||||
| CVE-2023-53696 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix memory leak in qla2x00_probe_one() There is a memory leak reported by kmemleak: unreferenced object 0xffffc900003f0000 (size 12288): comm "modprobe", pid 19117, jiffies 4299751452 (age 42490.264s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000629261a8>] __vmalloc_node_range+0xe56/0x1110 [<0000000001906886>] __vmalloc_node+0xbd/0x150 [<000000005bb4dc34>] vmalloc+0x25/0x30 [<00000000a2dc1194>] qla2x00_create_host+0x7a0/0xe30 [qla2xxx] [<0000000062b14b47>] qla2x00_probe_one+0x2eb8/0xd160 [qla2xxx] [<00000000641ccc04>] local_pci_probe+0xeb/0x1a0 The root cause is traced to an error-handling path in qla2x00_probe_one() when the adapter "base_vha" initialize failed. The fab_scan_rp "scan.l" is used to record the port information and it is allocated in qla2x00_create_host(). However, it is not released in the error handling path "probe_failed". Fix this by freeing the memory of "scan.l" when an error occurs in the adapter initialization process. | ||||
| CVE-2023-53728 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: posix-timers: Ensure timer ID search-loop limit is valid posix_timer_add() tries to allocate a posix timer ID by starting from the cached ID which was stored by the last successful allocation. This is done in a loop searching the ID space for a free slot one by one. The loop has to terminate when the search wrapped around to the starting point. But that's racy vs. establishing the starting point. That is read out lockless, which leads to the following problem: CPU0 CPU1 posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add() if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0; So CPU1 can observe a negative start value, i.e. -1, and the loop break never happens because the condition can never be true: if (sig->posix_timer_id == start) break; While this is unlikely to ever turn into an endless loop as the ID space is huge (INT_MAX), the racy read of the start value caught the attention of KCSAN and Dmitry unearthed that incorrectness. Rewrite it so that all id operations are under the hash lock. | ||||
| CVE-2025-39985 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow Sending an PF_PACKET allows to bypass the CAN framework logic and to directly reach the xmit() function of a CAN driver. The only check which is performed by the PF_PACKET framework is to make sure that skb->len fits the interface's MTU. Unfortunately, because the mcba_usb driver does not populate its net_device_ops->ndo_change_mtu(), it is possible for an attacker to configure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999 After doing so, the attacker could open a PF_PACKET socket using the ETH_P_CANXL protocol: socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL)) to inject a malicious CAN XL frames. For example: struct canxl_frame frame = { .flags = 0xff, .len = 2048, }; The CAN drivers' xmit() function are calling can_dev_dropped_skb() to check that the skb is valid, unfortunately under above conditions, the malicious packet is able to go through can_dev_dropped_skb() checks: 1. the skb->protocol is set to ETH_P_CANXL which is valid (the function does not check the actual device capabilities). 2. the length is a valid CAN XL length. And so, mcba_usb_start_xmit() receives a CAN XL frame which it is not able to correctly handle and will thus misinterpret it as a CAN frame. This can result in a buffer overflow. The driver will consume cf->len as-is with no further checks on these lines: usb_msg.dlc = cf->len; memcpy(usb_msg.data, cf->data, usb_msg.dlc); Here, cf->len corresponds to the flags field of the CAN XL frame. In our previous example, we set canxl_frame->flags to 0xff. Because the maximum expected length is 8, a buffer overflow of 247 bytes occurs! Populate net_device_ops->ndo_change_mtu() to ensure that the interface's MTU can not be set to anything bigger than CAN_MTU. By fixing the root cause, this prevents the buffer overflow. | ||||
| CVE-2025-39992 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: swap: check for stable address space before operating on the VMA It is possible to hit a zero entry while traversing the vmas in unuse_mm() called from swapoff path and accessing it causes the OOPS: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000446--> Loading the memory from offset 0x40 on the XA_ZERO_ENTRY as address. Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault The issue is manifested from the below race between the fork() on a process and swapoff: fork(dup_mmap()) swapoff(unuse_mm) --------------- ----------------- 1) Identical mtree is built using __mt_dup(). 2) copy_pte_range()--> copy_nonpresent_pte(): The dst mm is added into the mmlist to be visible to the swapoff operation. 3) Fatal signal is sent to the parent process(which is the current during the fork) thus skip the duplication of the vmas and mark the vma range with XA_ZERO_ENTRY as a marker for this process that helps during exit_mmap(). 4) swapoff is tried on the 'mm' added to the 'mmlist' as part of the 2. 5) unuse_mm(), that iterates through the vma's of this 'mm' will hit the non-NULL zero entry and operating on this zero entry as a vma is resulting into the oops. The proper fix would be around not exposing this partially-valid tree to others when droping the mmap lock, which is being solved with [1]. A simpler solution would be checking for MMF_UNSTABLE, as it is set if mm_struct is not fully initialized in dup_mmap(). Thanks to Liam/Lorenzo/David for all the suggestions in fixing this issue. | ||||
| CVE-2025-40006 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix folio is still mapped when deleted Migration may be raced with fallocating hole. remove_inode_single_folio will unmap the folio if the folio is still mapped. However, it's called without folio lock. If the folio is migrated and the mapped pte has been converted to migration entry, folio_mapped() returns false, and won't unmap it. Due to extra refcount held by remove_inode_single_folio, migration fails, restores migration entry to normal pte, and the folio is mapped again. As a result, we triggered BUG in filemap_unaccount_folio. The log is as follows: BUG: Bad page cache in process hugetlb pfn:156c00 page: refcount:515 mapcount:0 mapping:0000000099fef6e1 index:0x0 pfn:0x156c00 head: order:9 mapcount:1 entire_mapcount:1 nr_pages_mapped:0 pincount:0 aops:hugetlbfs_aops ino:dcc dentry name(?):"my_hugepage_file" flags: 0x17ffffc00000c1(locked|waiters|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: f4(hugetlb) page dumped because: still mapped when deleted CPU: 1 UID: 0 PID: 395 Comm: hugetlb Not tainted 6.17.0-rc5-00044-g7aac71907bde-dirty #484 NONE Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x4f/0x70 filemap_unaccount_folio+0xc4/0x1c0 __filemap_remove_folio+0x38/0x1c0 filemap_remove_folio+0x41/0xd0 remove_inode_hugepages+0x142/0x250 hugetlbfs_fallocate+0x471/0x5a0 vfs_fallocate+0x149/0x380 Hold folio lock before checking if the folio is mapped to avold race with migration. | ||||
| CVE-2025-40068 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: Fix integer overflow in run_unpack() The MFT record relative to the file being opened contains its runlist, an array containing information about the file's location on the physical disk. Analysis of all Call Stack paths showed that the values of the runlist array, from which LCNs are calculated, are not validated before run_unpack function. The run_unpack function decodes the compressed runlist data format from MFT attributes (for example, $DATA), converting them into a runs_tree structure, which describes the mapping of virtual clusters (VCN) to logical clusters (LCN). The NTFS3 subsystem also has a shortcut for deleting files from MFT records - in this case, the RUN_DEALLOCATE command is sent to the run_unpack input, and the function logic provides that all data transferred to the runlist about file or directory is deleted without creating a runs_tree structure. Substituting the runlist in the $DATA attribute of the MFT record for an arbitrary file can lead either to access to arbitrary data on the disk bypassing access checks to them (since the inode access check occurs above) or to destruction of arbitrary data on the disk. Add overflow check for addition operation. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-40094 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_acm: Refactor bind path to use __free() After an bind/unbind cycle, the acm->notify_req is left stale. If a subsequent bind fails, the unified error label attempts to free this stale request, leading to a NULL pointer dereference when accessing ep->ops->free_request. Refactor the error handling in the bind path to use the __free() automatic cleanup mechanism. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Call trace: usb_ep_free_request+0x2c/0xec gs_free_req+0x30/0x44 acm_bind+0x1b8/0x1f4 usb_add_function+0xcc/0x1f0 configfs_composite_bind+0x468/0x588 gadget_bind_driver+0x104/0x270 really_probe+0x190/0x374 __driver_probe_device+0xa0/0x12c driver_probe_device+0x3c/0x218 __device_attach_driver+0x14c/0x188 bus_for_each_drv+0x10c/0x168 __device_attach+0xfc/0x198 device_initial_probe+0x14/0x24 bus_probe_device+0x94/0x11c device_add+0x268/0x48c usb_add_gadget+0x198/0x28c dwc3_gadget_init+0x700/0x858 __dwc3_set_mode+0x3cc/0x664 process_scheduled_works+0x1d8/0x488 worker_thread+0x244/0x334 kthread+0x114/0x1bc ret_from_fork+0x10/0x20 | ||||
| CVE-2025-40120 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before. | ||||
| CVE-2025-40155 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: debugfs: Fix legacy mode page table dump logic In legacy mode, SSPTPTR is ignored if TT is not 00b or 01b. SSPTPTR maybe uninitialized or zero in that case and may cause oops like: Oops: general protection fault, probably for non-canonical address 0xf00087d3f000f000: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 786 Comm: cat Not tainted 6.16.0 #191 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 RIP: 0010:pgtable_walk_level+0x98/0x150 RSP: 0018:ffffc90000f279c0 EFLAGS: 00010206 RAX: 0000000040000000 RBX: ffffc90000f27ab0 RCX: 000000000000001e RDX: 0000000000000003 RSI: f00087d3f000f000 RDI: f00087d3f0010000 RBP: ffffc90000f27a00 R08: ffffc90000f27a98 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: f00087d3f000f000 R13: 0000000000000000 R14: 0000000040000000 R15: ffffc90000f27a98 FS: 0000764566dcb740(0000) GS:ffff8881f812c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000764566d44000 CR3: 0000000109d81003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <TASK> pgtable_walk_level+0x88/0x150 domain_translation_struct_show.isra.0+0x2d9/0x300 dev_domain_translation_struct_show+0x20/0x40 seq_read_iter+0x12d/0x490 ... Avoid walking the page table if TT is not 00b or 01b. | ||||
| CVE-2025-40167 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: detect invalid INLINE_DATA + EXTENTS flag combination syzbot reported a BUG_ON in ext4_es_cache_extent() when opening a verity file on a corrupted ext4 filesystem mounted without a journal. The issue is that the filesystem has an inode with both the INLINE_DATA and EXTENTS flags set: EXT4-fs error (device loop0): ext4_cache_extents:545: inode #15: comm syz.0.17: corrupted extent tree: lblk 0 < prev 66 Investigation revealed that the inode has both flags set: DEBUG: inode 15 - flag=1, i_inline_off=164, has_inline=1, extents_flag=1 This is an invalid combination since an inode should have either: - INLINE_DATA: data stored directly in the inode - EXTENTS: data stored in extent-mapped blocks Having both flags causes ext4_has_inline_data() to return true, skipping extent tree validation in __ext4_iget(). The unvalidated out-of-order extents then trigger a BUG_ON in ext4_es_cache_extent() due to integer underflow when calculating hole sizes. Fix this by detecting this invalid flag combination early in ext4_iget() and rejecting the corrupted inode. | ||||
| CVE-2025-40233 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: clear extent cache after moving/defragmenting extents The extent map cache can become stale when extents are moved or defragmented, causing subsequent operations to see outdated extent flags. This triggers a BUG_ON in ocfs2_refcount_cal_cow_clusters(). The problem occurs when: 1. copy_file_range() creates a reflinked extent with OCFS2_EXT_REFCOUNTED 2. ioctl(FITRIM) triggers ocfs2_move_extents() 3. __ocfs2_move_extents_range() reads and caches the extent (flags=0x2) 4. ocfs2_move_extent()/ocfs2_defrag_extent() calls __ocfs2_move_extent() which clears OCFS2_EXT_REFCOUNTED flag on disk (flags=0x0) 5. The extent map cache is not invalidated after the move 6. Later write() operations read stale cached flags (0x2) but disk has updated flags (0x0), causing a mismatch 7. BUG_ON(!(rec->e_flags & OCFS2_EXT_REFCOUNTED)) triggers Fix by clearing the extent map cache after each extent move/defrag operation in __ocfs2_move_extents_range(). This ensures subsequent operations read fresh extent data from disk. | ||||
| CVE-2025-40258 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race condition in mptcp_schedule_work() syzbot reported use-after-free in mptcp_schedule_work() [1] Issue here is that mptcp_schedule_work() schedules a work, then gets a refcount on sk->sk_refcnt if the work was scheduled. This refcount will be released by mptcp_worker(). [A] if (schedule_work(...)) { [B] sock_hold(sk); return true; } Problem is that mptcp_worker() can run immediately and complete before [B] We need instead : sock_hold(sk); if (schedule_work(...)) return true; sock_put(sk); [1] refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 29 at lib/refcount.c:25 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:25 Call Trace: <TASK> __refcount_add include/linux/refcount.h:-1 [inline] __refcount_inc include/linux/refcount.h:366 [inline] refcount_inc include/linux/refcount.h:383 [inline] sock_hold include/net/sock.h:816 [inline] mptcp_schedule_work+0x164/0x1a0 net/mptcp/protocol.c:943 mptcp_tout_timer+0x21/0xa0 net/mptcp/protocol.c:2316 call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747 expire_timers kernel/time/timer.c:1798 [inline] __run_timers kernel/time/timer.c:2372 [inline] __run_timer_base+0x648/0x970 kernel/time/timer.c:2384 run_timer_base kernel/time/timer.c:2393 [inline] run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403 handle_softirqs+0x22f/0x710 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] run_ktimerd+0xcf/0x190 kernel/softirq.c:1138 smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 | ||||
| CVE-2025-40269 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix potential overflow of PCM transfer buffer The PCM stream data in USB-audio driver is transferred over USB URB packet buffers, and each packet size is determined dynamically. The packet sizes are limited by some factors such as wMaxPacketSize USB descriptor. OTOH, in the current code, the actually used packet sizes are determined only by the rate and the PPS, which may be bigger than the size limit above. This results in a buffer overflow, as reported by syzbot. Basically when the limit is smaller than the calculated packet size, it implies that something is wrong, most likely a weird USB descriptor. So the best option would be just to return an error at the parameter setup time before doing any further operations. This patch introduces such a sanity check, and returns -EINVAL when the packet size is greater than maxpacksize. The comparison with ep->packsize[1] alone should suffice since it's always equal or greater than ep->packsize[0]. | ||||
| CVE-2025-40347 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix the deadlock of enetc_mdio_lock After applying the workaround for err050089, the LS1028A platform experiences RCU stalls on RT kernel. This issue is caused by the recursive acquisition of the read lock enetc_mdio_lock. Here list some of the call stacks identified under the enetc_poll path that may lead to a deadlock: enetc_poll -> enetc_lock_mdio -> enetc_clean_rx_ring OR napi_complete_done -> napi_gro_receive -> enetc_start_xmit -> enetc_lock_mdio -> enetc_map_tx_buffs -> enetc_unlock_mdio -> enetc_unlock_mdio After enetc_poll acquires the read lock, a higher-priority writer attempts to acquire the lock, causing preemption. The writer detects that a read lock is already held and is scheduled out. However, readers under enetc_poll cannot acquire the read lock again because a writer is already waiting, leading to a thread hang. Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent recursive lock acquisition. | ||||
| CVE-2025-68215 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP cleanup on driver removal in error path Improve the cleanup on releasing PTP resources in error path. The error case might happen either at the driver probe and PTP feature initialization or on PTP restart (errors in reset handling, NVM update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf function) and 'ps_lock' mutex deinitialization were missed. Additionally, ptp clock was not unregistered in the latter case. Keep PTP state as 'uninitialized' on init to distinguish between error scenarios and to avoid resource release duplication at driver removal. The consequence of missing ice_ptp_cleanup_pf call is the following call trace dumped when ice_adapter object is freed (port list is not empty, as it is required at this stage): [ T93022] ------------[ cut here ]------------ [ T93022] WARNING: CPU: 10 PID: 93022 at ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice] ... [ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice] ... [ T93022] Call Trace: [ T93022] <TASK> [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? __warn.cold+0xb0/0x10e [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? report_bug+0xd8/0x150 [ T93022] ? handle_bug+0xe9/0x110 [ T93022] ? exc_invalid_op+0x17/0x70 [ T93022] ? asm_exc_invalid_op+0x1a/0x20 [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] pci_device_remove+0x42/0xb0 [ T93022] device_release_driver_internal+0x19f/0x200 [ T93022] driver_detach+0x48/0x90 [ T93022] bus_remove_driver+0x70/0xf0 [ T93022] pci_unregister_driver+0x42/0xb0 [ T93022] ice_module_exit+0x10/0xdb0 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] ... [ T93022] ---[ end trace 0000000000000000 ]--- [ T93022] ice: module unloaded | ||||